[v6,4/5] dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
Commit Message
Add ADI MAX77541/MAX77540 devicetree document.
Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/mfd/adi,max77541.yaml | 68 +++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/adi,max77541.yaml
new file mode 100644
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/adi,max77541.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX77540/MAX77541 PMIC from ADI
+
+maintainers:
+ - Okan Sahin <okan.sahin@analog.com>
+
+description: |
+ MAX77540 is a Power Management IC with 2 buck regulators.
+
+ MAX77541 is a Power Management IC with 2 buck regulators and 1 ADC.
+
+properties:
+ compatible:
+ enum:
+ - adi,max77540
+ - adi,max77541
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ regulators:
+ $ref: /schemas/regulator/adi,max77541-regulator.yaml#
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@69 {
+ compatible = "adi,max77541";
+ reg = <0x69>;
+ interrupt-parent = <&gpio>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+
+ regulators {
+ buck1 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <5200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ buck2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <5200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+ };