[v5,3/3] mm/khugepaged: maintain page cache uptodate flag

Message ID 20230307052036.1520708-4-stevensd@google.com
State New
Headers
Series mm/khugepaged: fix khugepaged+shmem races |

Commit Message

David Stevens March 7, 2023, 5:20 a.m. UTC
  From: David Stevens <stevensd@chromium.org>

Make sure that collapse_file doesn't interfere with checking the
uptodate flag in the page cache by only inserting hpage into the page
cache after it has been updated and marked uptodate. This is achieved by
simply not replacing present pages with hpage when iterating over the
target range. The present pages are already locked, so replacing the
with the locked hpage before the collapse is finalized is unnecessary.

This fixes a race where folio_seek_hole_data would mistake hpage for
an fallocated but unwritten page. This race is visible to userspace via
data temporarily disappearing from SEEK_DATA/SEEK_HOLE.

Fixes: f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: David Stevens <stevensd@chromium.org>
Acked-by: Peter Xu <peterx@redhat.com>
---
 mm/khugepaged.c | 50 ++++++++++++-------------------------------------
 1 file changed, 12 insertions(+), 38 deletions(-)
  

Comments

Hugh Dickins March 23, 2023, 7:07 p.m. UTC | #1
On Tue, 7 Mar 2023, David Stevens wrote:

> From: David Stevens <stevensd@chromium.org>
> 
> Make sure that collapse_file doesn't interfere with checking the
> uptodate flag in the page cache by only inserting hpage into the page
> cache after it has been updated and marked uptodate. This is achieved by
> simply not replacing present pages with hpage when iterating over the
> target range. The present pages are already locked, so replacing the
> with the locked hpage before the collapse is finalized is unnecessary.
> 
> This fixes a race where folio_seek_hole_data would mistake hpage for
> an fallocated but unwritten page. This race is visible to userspace via
> data temporarily disappearing from SEEK_DATA/SEEK_HOLE.
> 
> Fixes: f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages")
> Signed-off-by: David Stevens <stevensd@chromium.org>
> Acked-by: Peter Xu <peterx@redhat.com>

NAK to this patch, I'm afraid: it deadlocks.

What I know it to deadlock against, does not make the most persuasive
argument: cgroup v1 deprecated memcg moving, where mc_handle_file_pte()
uses filemap_get_incore_folio() while holding page table lock, and spins
around doing "goto repeat" in filemap_get_entry() while folio_try_get_rcu()
keeps failing because collapse_file()'s old page has been left in the
xarray with its refcount frozen to 0.  Meanwhile, collapse_file() is
spinning to get that page table lock, to unmap pte of a later page.

mincore()'s use of filemap_get_incore_folio() would be liable to hit
the same deadlock.  If we think for longer, we may find more examples.
But even when not actually deadlocking, it's wasting lots of CPU on
concurrent lookups (e.g. faults) spinning in filemap_get_entry().

I don't suppose it's entirely accurate, but think of keeping a folio
refcount frozen to 0 as like holding a spinlock (and this lock sadly out
of sight from lockdep).  The pre-existing code works because the old page
with refcount frozen to 0 is immediately replaced in the xarray by an
entry for the new hpage, so the old page is no longer discoverable:
and the new hpage is locked, not with a spinlock but the usual
folio/page lock, on which concurrent lookups will sleep.

Your discovery of the SEEK_DATA/SEEK_HOLE issue is important - thank
you - but I believe collapse_file() should be left as is, and the fix
made instead in mapping_seek_hole_data() or folio_seek_hole_data():
I believe that should not jump to assume that a !uptodate folio is a
hole (as was reasonable to assume for shmem, before collapsing to huge
got added), but should lock the folio if !uptodate, and check again
after getting the lock - if still !uptodate, it's a shmem hole, not
a transient race with collapse_file().

I was (pleased but) a little surprised when Matthew found in 5.12 that
shmem_seek_hole_data() could be generalized to filemap_seek_hole_data():
he will have a surer grasp of what's safe or unsafe to assume of
!uptodate in non-shmem folios.

On an earlier audit, for different reasons, I did also run across
lib/buildid.c build_id_parse() using find_get_page() without checking
PageUptodate() - looks as if it might do the wrong thing if it races
with khugepaged collapsing text to huge, and should probably have a
similar fix.

Hugh

> ---
>  mm/khugepaged.c | 50 ++++++++++++-------------------------------------
>  1 file changed, 12 insertions(+), 38 deletions(-)
> 
> diff --git a/mm/khugepaged.c b/mm/khugepaged.c
> index 51ae399f2035..bdde0a02811b 100644
> --- a/mm/khugepaged.c
> +++ b/mm/khugepaged.c
> @@ -1930,12 +1930,6 @@ static int collapse_file(struct mm_struct *mm, unsigned long addr,
>  		}
>  	} while (1);
>  
> -	/*
> -	 * At this point the hpage is locked and not up-to-date.
> -	 * It's safe to insert it into the page cache, because nobody would
> -	 * be able to map it or use it in another way until we unlock it.
> -	 */
> -
>  	xas_set(&xas, start);
>  	for (index = start; index < end; index++) {
>  		page = xas_next(&xas);
> @@ -2104,13 +2098,9 @@ static int collapse_file(struct mm_struct *mm, unsigned long addr,
>  		}
>  
>  		/*
> -		 * Add the page to the list to be able to undo the collapse if
> -		 * something go wrong.
> +		 * Accumulate the pages that are being collapsed.
>  		 */
>  		list_add_tail(&page->lru, &pagelist);
> -
> -		/* Finally, replace with the new page. */
> -		xas_store(&xas, hpage);
>  		continue;
>  out_unlock:
>  		unlock_page(page);
> @@ -2149,8 +2139,7 @@ static int collapse_file(struct mm_struct *mm, unsigned long addr,
>  		goto rollback;
>  
>  	/*
> -	 * Replacing old pages with new one has succeeded, now we
> -	 * attempt to copy the contents.
> +	 * The old pages are locked, so they won't change anymore.
>  	 */
>  	index = start;
>  	list_for_each_entry(page, &pagelist, lru) {
> @@ -2230,11 +2219,11 @@ static int collapse_file(struct mm_struct *mm, unsigned long addr,
>  		/* nr_none is always 0 for non-shmem. */
>  		__mod_lruvec_page_state(hpage, NR_SHMEM, nr_none);
>  	}
> -	/* Join all the small entries into a single multi-index entry. */
> -	xas_set_order(&xas, start, HPAGE_PMD_ORDER);
> -	xas_store(&xas, hpage);
> -	xas_unlock_irq(&xas);
>  
> +	/*
> +	 * Mark hpage as uptodate before inserting it into the page cache so
> +	 * that it isn't mistaken for an fallocated but unwritten page.
> +	 */
>  	folio = page_folio(hpage);
>  	folio_mark_uptodate(folio);
>  	folio_ref_add(folio, HPAGE_PMD_NR - 1);
> @@ -2243,6 +2232,11 @@ static int collapse_file(struct mm_struct *mm, unsigned long addr,
>  		folio_mark_dirty(folio);
>  	folio_add_lru(folio);
>  
> +	/* Join all the small entries into a single multi-index entry. */
> +	xas_set_order(&xas, start, HPAGE_PMD_ORDER);
> +	xas_store(&xas, hpage);
> +	xas_unlock_irq(&xas);
> +
>  	/*
>  	 * Remove pte page tables, so we can re-fault the page as huge.
>  	 */
> @@ -2267,36 +2261,18 @@ static int collapse_file(struct mm_struct *mm, unsigned long addr,
>  
>  rollback:
>  	/* Something went wrong: roll back page cache changes */
> -	xas_lock_irq(&xas);
>  	if (nr_none) {
>  		mapping->nrpages -= nr_none;
>  		shmem_uncharge(mapping->host, nr_none);
>  	}
>  
> -	xas_set(&xas, start);
> -	end = index;
> -	for (index = start; index < end; index++) {
> -		xas_next(&xas);
> -		page = list_first_entry_or_null(&pagelist,
> -				struct page, lru);
> -		if (!page || xas.xa_index < page->index) {
> -			nr_none--;
> -			continue;
> -		}
> -
> -		VM_BUG_ON_PAGE(page->index != xas.xa_index, page);
> -
> +	list_for_each_entry_safe(page, tmp, &pagelist, lru) {
>  		/* Unfreeze the page. */
>  		list_del(&page->lru);
>  		page_ref_unfreeze(page, 2);
> -		xas_store(&xas, page);
> -		xas_pause(&xas);
> -		xas_unlock_irq(&xas);
>  		unlock_page(page);
>  		putback_lru_page(page);
> -		xas_lock_irq(&xas);
>  	}
> -	VM_BUG_ON(nr_none);
>  	/*
>  	 * Undo the updates of filemap_nr_thps_inc for non-SHMEM file only.
>  	 * This undo is not needed unless failure is due to SCAN_COPY_MC.
> @@ -2304,8 +2280,6 @@ static int collapse_file(struct mm_struct *mm, unsigned long addr,
>  	if (!is_shmem && result == SCAN_COPY_MC)
>  		filemap_nr_thps_dec(mapping);
>  
> -	xas_unlock_irq(&xas);
> -
>  	hpage->mapping = NULL;
>  
>  	unlock_page(hpage);
> -- 
> 2.40.0.rc0.216.gc4246ad0f0-goog
  
Matthew Wilcox March 23, 2023, 9:56 p.m. UTC | #2
On Thu, Mar 23, 2023 at 12:07:46PM -0700, Hugh Dickins wrote:
> On an earlier audit, for different reasons, I did also run across
> lib/buildid.c build_id_parse() using find_get_page() without checking
> PageUptodate() - looks as if it might do the wrong thing if it races
> with khugepaged collapsing text to huge, and should probably have a
> similar fix.

That shouldn't be using find_get_page().  It should probably use
read_cache_folio() which will actually read in the data if it's not
present in the page cache, and return an ERR_PTR if the data couldn't
be read.
  
Song Liu March 23, 2023, 10:28 p.m. UTC | #3
On Thu, Mar 23, 2023 at 2:56 PM Matthew Wilcox <willy@infradead.org> wrote:
>
> On Thu, Mar 23, 2023 at 12:07:46PM -0700, Hugh Dickins wrote:
> > On an earlier audit, for different reasons, I did also run across
> > lib/buildid.c build_id_parse() using find_get_page() without checking
> > PageUptodate() - looks as if it might do the wrong thing if it races
> > with khugepaged collapsing text to huge, and should probably have a
> > similar fix.
>
> That shouldn't be using find_get_page().  It should probably use
> read_cache_folio() which will actually read in the data if it's not
> present in the page cache, and return an ERR_PTR if the data couldn't
> be read.

build_id_parse() can be called from NMI, so I don't think we can let
read_cache_folio() read-in the data.

Thanks,
Song
  
Hugh Dickins March 24, 2023, 1:56 a.m. UTC | #4
On Thu, 23 Mar 2023, Song Liu wrote:
> On Thu, Mar 23, 2023 at 2:56 PM Matthew Wilcox <willy@infradead.org> wrote:
> >
> > On Thu, Mar 23, 2023 at 12:07:46PM -0700, Hugh Dickins wrote:
> > > On an earlier audit, for different reasons, I did also run across
> > > lib/buildid.c build_id_parse() using find_get_page() without checking
> > > PageUptodate() - looks as if it might do the wrong thing if it races
> > > with khugepaged collapsing text to huge, and should probably have a
> > > similar fix.
> >
> > That shouldn't be using find_get_page().  It should probably use
> > read_cache_folio() which will actually read in the data if it's not
> > present in the page cache, and return an ERR_PTR if the data couldn't
> > be read.
> 
> build_id_parse() can be called from NMI, so I don't think we can let
> read_cache_folio() read-in the data.

Interesting.

This being the same Layering_Violation_ID which is asking for a home in
everyone's struct file?  (Okay, I'm being disagreeable, no need to answer!)

I think even the current find_get_page() is unsafe from NMI: imagine that
NMI interrupting a sequence (maybe THP collapse or splitting, maybe page
migration, maybe others) when the page refcount has been frozen to 0:
you'll just have to reboot the machine?

I guess the RCU-safety of find_get_page() implies that its XArray basics
are safe in NMI; but you need a low-level variant (xas_find()?) which
does none of the "goto retry"s, and fails immediately if anything is
wrong - including !PageUptodate.

Hugh
  
Matthew Wilcox March 24, 2023, 3:30 a.m. UTC | #5
On Thu, Mar 23, 2023 at 06:56:34PM -0700, Hugh Dickins wrote:
> On Thu, 23 Mar 2023, Song Liu wrote:
> > On Thu, Mar 23, 2023 at 2:56 PM Matthew Wilcox <willy@infradead.org> wrote:
> > >
> > > On Thu, Mar 23, 2023 at 12:07:46PM -0700, Hugh Dickins wrote:
> > > > On an earlier audit, for different reasons, I did also run across
> > > > lib/buildid.c build_id_parse() using find_get_page() without checking
> > > > PageUptodate() - looks as if it might do the wrong thing if it races
> > > > with khugepaged collapsing text to huge, and should probably have a
> > > > similar fix.
> > >
> > > That shouldn't be using find_get_page().  It should probably use
> > > read_cache_folio() which will actually read in the data if it's not
> > > present in the page cache, and return an ERR_PTR if the data couldn't
> > > be read.
> > 
> > build_id_parse() can be called from NMI, so I don't think we can let
> > read_cache_folio() read-in the data.
> 
> Interesting.
> 
> This being the same Layering_Violation_ID which is asking for a home in
> everyone's struct file?  (Okay, I'm being disagreeable, no need to answer!)

Yes, that's the one.  Part of the BPF "splatter stuff all across the
kernel that we don't really understand" (see, I can be just as
disagreeable!)

> I think even the current find_get_page() is unsafe from NMI: imagine that
> NMI interrupting a sequence (maybe THP collapse or splitting, maybe page
> migration, maybe others) when the page refcount has been frozen to 0:
> you'll just have to reboot the machine?

Correct; if it's been frozen by this CPU, we'll spin forever.  I think
the other conditions where we retry are temporary and caused by
something _another_ CPU is doing.  For example, if _this_ CPU is in the
middle of modifying the tree when an NMI happens, we won't hit the
xas_retry() case.  That can only happen if we've observed something
another CPU did, and then a second write happened from that same other
CPU.  The easiest example of that would be that we hit this kind of
race:

CPU 0				CPU 1
load root of tree, points to node
				store entry in root of tree
				wmb();
				store RETRY entry in node
load entry from node, observe RETRY entry

The retry will happen and we'll observe the new state of the tree with
the entry we're looking for in the root.

If CPU 1 takes an NMI and interrupts itself, it will always see a
consistent tree.

> I guess the RCU-safety of find_get_page() implies that its XArray basics
> are safe in NMI; but you need a low-level variant (xas_find()?) which
> does none of the "goto retry"s, and fails immediately if anything is
> wrong - including !PageUptodate.

The Uptodate flag check needs to be done by the caller; the
find_get_page() family return !uptodate pages.

But find_get_page() does not advertise itself as NMI-safe.  And I
think it's wrong to try to make it NMI-safe.  Most of the kernel is
not NMI-safe.  I think it's incumbent on the BPF people to get the
information they need ahead of taking the NMI.  NMI handlers are not
supposed to be doing a huge amount of work!  I don't really understand
why it needs to do work in NMI context; surely it can note the location of
the fault and queue work to be done later (eg on irq-enable, task-switch
or return-to-user)
  
Song Liu March 24, 2023, 6:03 a.m. UTC | #6
> On Mar 23, 2023, at 8:30 PM, Matthew Wilcox <willy@infradead.org> wrote:

[...]

> 
> The Uptodate flag check needs to be done by the caller; the
> find_get_page() family return !uptodate pages.
> 
> But find_get_page() does not advertise itself as NMI-safe.  And I
> think it's wrong to try to make it NMI-safe.  Most of the kernel is
> not NMI-safe.  I think it's incumbent on the BPF people to get the
> information they need ahead of taking the NMI.  NMI handlers are not
> supposed to be doing a huge amount of work!  I don't really understand
> why it needs to do work in NMI context; surely it can note the location of
> the fault and queue work to be done later (eg on irq-enable, task-switch
> or return-to-user)

The use case here is a profiler (similar to perf-record). Parsing the 
build id in side the NMI makes the profiler a lot simpler. Otherwise, 
we will need some post processing for each sample. 

OTOH, it is totally fine if build_id_parse() fails some time, say < 5%. 
The profiler output is still useful in such cases. 

I guess the next step is to replace find_get_page() with a NMI-safe
version?

Thanks,
Song
  
Matthew Wilcox March 24, 2023, 1:31 p.m. UTC | #7
On Fri, Mar 24, 2023 at 06:03:37AM +0000, Song Liu wrote:
> 
> 
> > On Mar 23, 2023, at 8:30 PM, Matthew Wilcox <willy@infradead.org> wrote:
> 
> [...]
> 
> > 
> > The Uptodate flag check needs to be done by the caller; the
> > find_get_page() family return !uptodate pages.
> > 
> > But find_get_page() does not advertise itself as NMI-safe.  And I
> > think it's wrong to try to make it NMI-safe.  Most of the kernel is
> > not NMI-safe.  I think it's incumbent on the BPF people to get the
> > information they need ahead of taking the NMI.  NMI handlers are not
> > supposed to be doing a huge amount of work!  I don't really understand
> > why it needs to do work in NMI context; surely it can note the location of
> > the fault and queue work to be done later (eg on irq-enable, task-switch
> > or return-to-user)
> 
> The use case here is a profiler (similar to perf-record). Parsing the 
> build id in side the NMI makes the profiler a lot simpler. Otherwise, 
> we will need some post processing for each sample. 

Simpler for you, maybe.  But this is an NMI!  It's not supposed to
be doing printf-formatting or whatever, much less poking around
in the file cache.  Like perf, it should record a sample and then
convert that later.  Maybe it can defer to a tasklet, but i think
scheduling work is a better option.

> OTOH, it is totally fine if build_id_parse() fails some time, say < 5%. 
> The profiler output is still useful in such cases. 
> 
> I guess the next step is to replace find_get_page() with a NMI-safe
> version?

No, absolutely not.  Stop doing so much work in an NMI.
  
David Stevens March 28, 2023, 9:48 a.m. UTC | #8
On Fri, Mar 24, 2023 at 4:08 AM Hugh Dickins <hughd@google.com> wrote:
>
> On Tue, 7 Mar 2023, David Stevens wrote:
>
> > From: David Stevens <stevensd@chromium.org>
> >
> > Make sure that collapse_file doesn't interfere with checking the
> > uptodate flag in the page cache by only inserting hpage into the page
> > cache after it has been updated and marked uptodate. This is achieved by
> > simply not replacing present pages with hpage when iterating over the
> > target range. The present pages are already locked, so replacing the
> > with the locked hpage before the collapse is finalized is unnecessary.
> >
> > This fixes a race where folio_seek_hole_data would mistake hpage for
> > an fallocated but unwritten page. This race is visible to userspace via
> > data temporarily disappearing from SEEK_DATA/SEEK_HOLE.
> >
> > Fixes: f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages")
> > Signed-off-by: David Stevens <stevensd@chromium.org>
> > Acked-by: Peter Xu <peterx@redhat.com>
>
> NAK to this patch, I'm afraid: it deadlocks.
>
> What I know it to deadlock against, does not make the most persuasive
> argument: cgroup v1 deprecated memcg moving, where mc_handle_file_pte()
> uses filemap_get_incore_folio() while holding page table lock, and spins
> around doing "goto repeat" in filemap_get_entry() while folio_try_get_rcu()
> keeps failing because collapse_file()'s old page has been left in the
> xarray with its refcount frozen to 0.  Meanwhile, collapse_file() is
> spinning to get that page table lock, to unmap pte of a later page.
>
> mincore()'s use of filemap_get_incore_folio() would be liable to hit
> the same deadlock.  If we think for longer, we may find more examples.
> But even when not actually deadlocking, it's wasting lots of CPU on
> concurrent lookups (e.g. faults) spinning in filemap_get_entry().

Ignoring my changes for now, these callers of filemap_get_incore_folio
seem broken to some degree with respect to khugepaged. Mincore can
show mlocked pages spuriously disappearing - this is pretty easy to
reproduce with concurrent calls to MADV_COLLAPSE and mincore. As for
the memcg code, I'm not sure how precise it is expected to be, but it
seems likely that khugepaged can make task migration accounting less
reliable (although I don't really understand the code).

> I don't suppose it's entirely accurate, but think of keeping a folio
> refcount frozen to 0 as like holding a spinlock (and this lock sadly out
> of sight from lockdep).  The pre-existing code works because the old page
> with refcount frozen to 0 is immediately replaced in the xarray by an
> entry for the new hpage, so the old page is no longer discoverable:
> and the new hpage is locked, not with a spinlock but the usual
> folio/page lock, on which concurrent lookups will sleep.

Is it actually necessary to freeze the original pages? At least at a
surface level, it seems that the arguments in 87c460a0bded
("mm/khugepaged: collapse_shmem() without freezing new_page") would
apply to the original pages as well. And if it is actually necessary
to freeze the original pages, why is it not necessary to freeze the
hugepage for the rollback case? Rolling back hugepage->original pages
seems more-or-less symmetric to collapsing original pages->hugepage.

> Your discovery of the SEEK_DATA/SEEK_HOLE issue is important - thank
> you - but I believe collapse_file() should be left as is, and the fix
> made instead in mapping_seek_hole_data() or folio_seek_hole_data():
> I believe that should not jump to assume that a !uptodate folio is a
> hole (as was reasonable to assume for shmem, before collapsing to huge
> got added), but should lock the folio if !uptodate, and check again
> after getting the lock - if still !uptodate, it's a shmem hole, not
> a transient race with collapse_file().

This sounds like it would work for lseek. I guess it could maybe be
made to sort of work for mincore if we abort the walk, lock the page,
restart the walk, and then re-validate the locked page. Although
that's not exactly efficient.

-David

> I was (pleased but) a little surprised when Matthew found in 5.12 that
> shmem_seek_hole_data() could be generalized to filemap_seek_hole_data():
> he will have a surer grasp of what's safe or unsafe to assume of
> !uptodate in non-shmem folios.
>
> On an earlier audit, for different reasons, I did also run across
> lib/buildid.c build_id_parse() using find_get_page() without checking
> PageUptodate() - looks as if it might do the wrong thing if it races
> with khugepaged collapsing text to huge, and should probably have a
> similar fix.
>
> Hugh
  
Song Liu March 29, 2023, 4:53 p.m. UTC | #9
> On Mar 24, 2023, at 6:31 AM, Matthew Wilcox <willy@infradead.org> wrote:
> 
> On Fri, Mar 24, 2023 at 06:03:37AM +0000, Song Liu wrote:
>> 
>> 
>>> On Mar 23, 2023, at 8:30 PM, Matthew Wilcox <willy@infradead.org> wrote:
>> 
>> [...]
>> 
>>> 
>>> The Uptodate flag check needs to be done by the caller; the
>>> find_get_page() family return !uptodate pages.
>>> 
>>> But find_get_page() does not advertise itself as NMI-safe.  And I
>>> think it's wrong to try to make it NMI-safe.  Most of the kernel is
>>> not NMI-safe.  I think it's incumbent on the BPF people to get the
>>> information they need ahead of taking the NMI.  NMI handlers are not
>>> supposed to be doing a huge amount of work!  I don't really understand
>>> why it needs to do work in NMI context; surely it can note the location of
>>> the fault and queue work to be done later (eg on irq-enable, task-switch
>>> or return-to-user)
>> 
>> The use case here is a profiler (similar to perf-record). Parsing the 
>> build id in side the NMI makes the profiler a lot simpler. Otherwise, 
>> we will need some post processing for each sample. 
> 
> Simpler for you, maybe.  But this is an NMI!  It's not supposed to
> be doing printf-formatting or whatever, much less poking around
> in the file cache.  Like perf, it should record a sample and then
> convert that later.  Maybe it can defer to a tasklet, but i think
> scheduling work is a better option.
> 
>> OTOH, it is totally fine if build_id_parse() fails some time, say < 5%. 
>> The profiler output is still useful in such cases. 
>> 
>> I guess the next step is to replace find_get_page() with a NMI-safe
>> version?
> 
> No, absolutely not.  Stop doing so much work in an NMI.

While I understand the concern, it is not something we can easily remove, 
as there are users rely on this feature. How about we discuss this at
upcoming LSFMMBPF?

Thanks,
Song
  

Patch

diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index 51ae399f2035..bdde0a02811b 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -1930,12 +1930,6 @@  static int collapse_file(struct mm_struct *mm, unsigned long addr,
 		}
 	} while (1);
 
-	/*
-	 * At this point the hpage is locked and not up-to-date.
-	 * It's safe to insert it into the page cache, because nobody would
-	 * be able to map it or use it in another way until we unlock it.
-	 */
-
 	xas_set(&xas, start);
 	for (index = start; index < end; index++) {
 		page = xas_next(&xas);
@@ -2104,13 +2098,9 @@  static int collapse_file(struct mm_struct *mm, unsigned long addr,
 		}
 
 		/*
-		 * Add the page to the list to be able to undo the collapse if
-		 * something go wrong.
+		 * Accumulate the pages that are being collapsed.
 		 */
 		list_add_tail(&page->lru, &pagelist);
-
-		/* Finally, replace with the new page. */
-		xas_store(&xas, hpage);
 		continue;
 out_unlock:
 		unlock_page(page);
@@ -2149,8 +2139,7 @@  static int collapse_file(struct mm_struct *mm, unsigned long addr,
 		goto rollback;
 
 	/*
-	 * Replacing old pages with new one has succeeded, now we
-	 * attempt to copy the contents.
+	 * The old pages are locked, so they won't change anymore.
 	 */
 	index = start;
 	list_for_each_entry(page, &pagelist, lru) {
@@ -2230,11 +2219,11 @@  static int collapse_file(struct mm_struct *mm, unsigned long addr,
 		/* nr_none is always 0 for non-shmem. */
 		__mod_lruvec_page_state(hpage, NR_SHMEM, nr_none);
 	}
-	/* Join all the small entries into a single multi-index entry. */
-	xas_set_order(&xas, start, HPAGE_PMD_ORDER);
-	xas_store(&xas, hpage);
-	xas_unlock_irq(&xas);
 
+	/*
+	 * Mark hpage as uptodate before inserting it into the page cache so
+	 * that it isn't mistaken for an fallocated but unwritten page.
+	 */
 	folio = page_folio(hpage);
 	folio_mark_uptodate(folio);
 	folio_ref_add(folio, HPAGE_PMD_NR - 1);
@@ -2243,6 +2232,11 @@  static int collapse_file(struct mm_struct *mm, unsigned long addr,
 		folio_mark_dirty(folio);
 	folio_add_lru(folio);
 
+	/* Join all the small entries into a single multi-index entry. */
+	xas_set_order(&xas, start, HPAGE_PMD_ORDER);
+	xas_store(&xas, hpage);
+	xas_unlock_irq(&xas);
+
 	/*
 	 * Remove pte page tables, so we can re-fault the page as huge.
 	 */
@@ -2267,36 +2261,18 @@  static int collapse_file(struct mm_struct *mm, unsigned long addr,
 
 rollback:
 	/* Something went wrong: roll back page cache changes */
-	xas_lock_irq(&xas);
 	if (nr_none) {
 		mapping->nrpages -= nr_none;
 		shmem_uncharge(mapping->host, nr_none);
 	}
 
-	xas_set(&xas, start);
-	end = index;
-	for (index = start; index < end; index++) {
-		xas_next(&xas);
-		page = list_first_entry_or_null(&pagelist,
-				struct page, lru);
-		if (!page || xas.xa_index < page->index) {
-			nr_none--;
-			continue;
-		}
-
-		VM_BUG_ON_PAGE(page->index != xas.xa_index, page);
-
+	list_for_each_entry_safe(page, tmp, &pagelist, lru) {
 		/* Unfreeze the page. */
 		list_del(&page->lru);
 		page_ref_unfreeze(page, 2);
-		xas_store(&xas, page);
-		xas_pause(&xas);
-		xas_unlock_irq(&xas);
 		unlock_page(page);
 		putback_lru_page(page);
-		xas_lock_irq(&xas);
 	}
-	VM_BUG_ON(nr_none);
 	/*
 	 * Undo the updates of filemap_nr_thps_inc for non-SHMEM file only.
 	 * This undo is not needed unless failure is due to SCAN_COPY_MC.
@@ -2304,8 +2280,6 @@  static int collapse_file(struct mm_struct *mm, unsigned long addr,
 	if (!is_shmem && result == SCAN_COPY_MC)
 		filemap_nr_thps_dec(mapping);
 
-	xas_unlock_irq(&xas);
-
 	hpage->mapping = NULL;
 
 	unlock_page(hpage);