arm64: dts: amlogic: gxl: use gxl mdio multiplexer
Commit Message
So the far, GXL SoCs were using the generic mmio register based mdio
multiplexer. This properly sets one of the glue register but the SoC
actually has 3 of those registers.
One of them sets the ID under which the internal phy will advertise
itself. If nothing sets this register before linux boots (like u-boot), the
internal phy path is broken.
To address this problem, a dedicated MDIO mux driver has been
introduced. Switch to this new driver.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 25 +++++++++++-----------
1 file changed, 13 insertions(+), 12 deletions(-)
Comments
Hi,
On Mon, 06 Mar 2023 16:13:54 +0100, Jerome Brunet wrote:
> So the far, GXL SoCs were using the generic mmio register based mdio
> multiplexer. This properly sets one of the glue register but the SoC
> actually has 3 of those registers.
>
> One of them sets the ID under which the internal phy will advertise
> itself. If nothing sets this register before linux boots (like u-boot), the
> internal phy path is broken.
>
> [...]
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.4/arm64-dt)
[1/1] arm64: dts: amlogic: gxl: use gxl mdio multiplexer
https://git.kernel.org/amlogic/c/c2e9012bb383f538186cf11d00d223d025d10c8d
These changes has been applied on the intermediate git tree [1].
The v6.4/arm64-dt branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.
In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].
The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.
If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
@@ -773,16 +773,23 @@ mux {
};
};
- eth-phy-mux@55c {
- compatible = "mdio-mux-mmioreg", "mdio-mux";
+ eth_phy_mux: mdio@558 {
+ reg = <0x0 0x558 0x0 0xc>;
+ compatible = "amlogic,gxl-mdio-mux";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x0 0x55c 0x0 0x4>;
- mux-mask = <0xffffffff>;
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "ref";
mdio-parent-bus = <&mdio0>;
- internal_mdio: mdio@e40908ff {
- reg = <0xe40908ff>;
+ external_mdio: mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ internal_mdio: mdio@1 {
+ reg = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -793,12 +800,6 @@ internal_phy: ethernet-phy@8 {
max-speed = <100>;
};
};
-
- external_mdio: mdio@2009087f {
- reg = <0x2009087f>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
};
};