diff mbox series

[RFT,02/20] clk: qcom: smd-rpm: Add .is_prepared hook

Message ID 20230303-topic-rpmcc_sleep-v1-2-d9cfaf9b27a7@linaro.org
State New
Headers
Series SMD RPMCC sleep preparations |

Commit Message

Konrad Dybcio March 4, 2023, 1:27 p.m. UTC 
  From: Shawn Guo <shawn.guo@linaro.org>

The RPM clocks are enabled/disabled through clk framework prepare/unprepare
hooks.  Without .is_prepared hook, those unused RPM clocks will not be
disabled by core function clk_unprepare_unused_subtree(), because
clk_core_is_prepared() always returns 0.

Add .is_prepared hook to clk_ops and return the clock prepare (enable)
state, so that those unused RPM clocks can be disabled by clk framework.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
[Konrad: rebase, don't duplicate the enable func]
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/clk/qcom/clk-smd-rpm.c | 2 ++
 1 file changed, 2 insertions(+)

Comments

Dmitry Baryshkov March 6, 2023, 1:05 a.m. UTC | #1 
On Sat, 4 Mar 2023 at 15:27, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
> From: Shawn Guo <shawn.guo@linaro.org>
>
> The RPM clocks are enabled/disabled through clk framework prepare/unprepare
> hooks.  Without .is_prepared hook, those unused RPM clocks will not be
> disabled by core function clk_unprepare_unused_subtree(), because
> clk_core_is_prepared() always returns 0.
>
> Add .is_prepared hook to clk_ops and return the clock prepare (enable)
> state, so that those unused RPM clocks can be disabled by clk framework.

Does it make any difference? Without this patch the clock framework
depends on core->prepare_count to judge whether the clock should be
unprepared. With this patch in place, it will depend on r->enabled,
which is more or less the same thing.
Probably there is one category, the prepared-but-not-enabled clocks.

>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> [Konrad: rebase, don't duplicate the enable func]
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>  drivers/clk/qcom/clk-smd-rpm.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
> index ecacfbc4a16c..cce7daa97c1e 100644
> --- a/drivers/clk/qcom/clk-smd-rpm.c
> +++ b/drivers/clk/qcom/clk-smd-rpm.c
> @@ -438,6 +438,7 @@ static const struct clk_ops clk_smd_rpm_ops = {
>         .round_rate     = clk_smd_rpm_round_rate,
>         .recalc_rate    = clk_smd_rpm_recalc_rate,
>         .is_enabled     = clk_smd_rpm_is_enabled,
> +       .is_prepared    = clk_smd_rpm_is_enabled,
>  };
>
>  static const struct clk_ops clk_smd_rpm_branch_ops = {
> @@ -445,6 +446,7 @@ static const struct clk_ops clk_smd_rpm_branch_ops = {
>         .unprepare      = clk_smd_rpm_unprepare,
>         .recalc_rate    = clk_smd_rpm_recalc_rate,
>         .is_enabled     = clk_smd_rpm_is_enabled,
> +       .is_prepared    = clk_smd_rpm_is_enabled,
>  };
>
>  DEFINE_CLK_SMD_RPM_BRANCH_A(bi_tcxo, QCOM_SMD_RPM_MISC_CLK, 0, 19200000);
>
> --
> 2.39.2
>
diff mbox series

Patch

diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index ecacfbc4a16c..cce7daa97c1e 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -438,6 +438,7 @@  static const struct clk_ops clk_smd_rpm_ops = {
 	.round_rate	= clk_smd_rpm_round_rate,
 	.recalc_rate	= clk_smd_rpm_recalc_rate,
 	.is_enabled	= clk_smd_rpm_is_enabled,
+	.is_prepared	= clk_smd_rpm_is_enabled,
 };
 
 static const struct clk_ops clk_smd_rpm_branch_ops = {
@@ -445,6 +446,7 @@  static const struct clk_ops clk_smd_rpm_branch_ops = {
 	.unprepare	= clk_smd_rpm_unprepare,
 	.recalc_rate	= clk_smd_rpm_recalc_rate,
 	.is_enabled	= clk_smd_rpm_is_enabled,
+	.is_prepared	= clk_smd_rpm_is_enabled,
 };
 
 DEFINE_CLK_SMD_RPM_BRANCH_A(bi_tcxo, QCOM_SMD_RPM_MISC_CLK, 0, 19200000);