diff mbox series

[2/3] tty: n_gsm: allow window size configuration

Message ID 20230228062957.3150-2-daniel.starke@siemens.com
State New
Headers
Series [1/3] tty: n_gsm: add ioctl for DLC specific parameter configuration |

Commit Message

D. Starke Feb. 28, 2023, 6:29 a.m. UTC 
  From: Daniel Starke <daniel.starke@siemens.com>

n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 6 describes the error recovery mode option
which is based on I frames. The k parameter defines the maximum number of
I frames that a DLC can have unacknowledged as described in chapter 5.7.4.
The current n_gsm implementation does not support the error recovery mode
option. However, the k parameter is also part of the parameter negotiation
message as described in chapter 5.4.6.3.1. Chapter 5.7.4 also notes that
the allowed value range for k is 1-7. That means a 0 is counted as invalid
here. This means that the user needs to configure a valid value here even
if the function itself is not supported. Otherwise, parameter negotiation
may fail.

Allow setting of k via ioctl in gsm_config(). Range checks are already
included.

Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
---
 drivers/tty/n_gsm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 3ca33149c339..494657e8535d 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -3276,8 +3276,8 @@  static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
 	int need_close = 0;
 	int need_restart = 0;
 
-	/* Stuff we don't support yet - UI or I frame transport, windowing */
-	if ((c->adaption != 1 && c->adaption != 2) || c->k)
+	/* Stuff we don't support yet - UI or I frame transport */
+	if (c->adaption != 1 && c->adaption != 2)
 		return -EOPNOTSUPP;
 	/* Check the MRU/MTU range looks sane */
 	if (c->mru < MIN_MTU || c->mtu < MIN_MTU)