[10/12] mips: ralink: mt7620: define MT7620_SYSC_BASE with __iomem
Commit Message
So that MT7620_SYSC_BASE can be used later in multiple functions without
needing to repeat this __iomem declaration each time
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
arch/mips/include/asm/mach-ralink/mt7620.h | 3 ++-
arch/mips/ralink/mt7620.c | 15 +++++++--------
2 files changed, 9 insertions(+), 9 deletions(-)
@@ -11,7 +11,8 @@
#ifndef _MT7620_REGS_H_
#define _MT7620_REGS_H_
-#define MT7620_SYSC_BASE 0x10000000
+#define IOMEM(x) ((void __iomem *)(KSEG1ADDR(x)))
+#define MT7620_SYSC_BASE IOMEM(0x10000000)
#define SYSC_REG_CHIP_NAME0 0x00
#define SYSC_REG_CHIP_NAME1 0x04
@@ -326,7 +326,6 @@ mt7628_dram_init(struct ralink_soc_info *soc_info)
void __init prom_soc_init(struct ralink_soc_info *soc_info)
{
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
unsigned char *name = NULL;
u32 n0;
u32 n1;
@@ -336,9 +335,9 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
u32 pmu1;
u32 bga;
- n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
- n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
- rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
+ n0 = __raw_readl(MT7620_SYSC_BASE + SYSC_REG_CHIP_NAME0);
+ n1 = __raw_readl(MT7620_SYSC_BASE + SYSC_REG_CHIP_NAME1);
+ rev = __raw_readl(MT7620_SYSC_BASE + SYSC_REG_CHIP_REV);
bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
@@ -352,7 +351,7 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
soc_info->compatible = "ralink,mt7620n-soc";
}
} else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
- u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG);
+ u32 efuse = __raw_readl(MT7620_SYSC_BASE + SYSC_REG_EFUSE_CFG);
if (efuse & EFUSE_MT7688) {
ralink_soc = MT762X_SOC_MT7688;
@@ -372,7 +371,7 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
(rev & CHIP_REV_ECO_MASK));
- cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
+ cfg0 = __raw_readl(MT7620_SYSC_BASE + SYSC_REG_SYSTEM_CONFIG0);
if (is_mt76x8()) {
dram_type = cfg0 & DRAM_TYPE_MT7628_MASK;
} else {
@@ -388,8 +387,8 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
else
mt7620_dram_init(soc_info);
- pmu0 = __raw_readl(sysc + PMU0_CFG);
- pmu1 = __raw_readl(sysc + PMU1_CFG);
+ pmu0 = __raw_readl(MT7620_SYSC_BASE + PMU0_CFG);
+ pmu1 = __raw_readl(MT7620_SYSC_BASE + PMU1_CFG);
pr_info("Analog PMU set to %s control\n",
(pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));