From patchwork Sun Feb 26 13:05:36 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Peng Fan (OSS)" X-Patchwork-Id: 61612 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a5d:5915:0:0:0:0:0 with SMTP id v21csp1935085wrd; Sun, 26 Feb 2023 05:08:21 -0800 (PST) X-Google-Smtp-Source: AK7set/L8TRaTxsmgN/4G/VqVOHD0Q3gNDl6r0XV6+et2T8Zkz66YDKHTvRxqkEWM4u2sXFx3AjJ X-Received: by 2002:a17:906:2cf:b0:878:5fa4:7443 with SMTP id 15-20020a17090602cf00b008785fa47443mr28319138ejk.3.1677416901086; Sun, 26 Feb 2023 05:08:21 -0800 (PST) ARC-Seal: i=2; a=rsa-sha256; t=1677416901; cv=pass; d=google.com; s=arc-20160816; b=YHVEoi56tqCr9+xTfh7l2KzgyFAUnqJ/tGWODBqLd5onolivg+CZBHXGCvQIPNxycw lwApelzuxBRF0Dk3krN9rFRSxDeCXiMuLYV2ayViypBoqjUuf4GpIbBBBgxHkEjKgWwt NVhgKDLjBhIecWRiTL7KTpLSBTdPheRQCfc66B3sLVSri1B0G5VN+4wkmo7wYdmrbLAe z9A01f5iltoQJQ5mV/mX4z5zCHk4HTi94NGjBXj4XA8cYz4LUm7GM3qgfJKgolHkjwIi XEgsx8W7Xd+2OCeSW1gQgAJboLtOBYiujU3wx8U5DvJRWyx9YOyygMy1SozkcJuU9Brp N+6g== ARC-Message-Signature: i=2; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:mime-version:content-transfer-encoding :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=aHeaICmLd1yx0hQWnMlGQCtt6ch+0I5oZCNI8bgMkT0=; b=L10ycG16TbWP8aKV9cVVhnzc5h4rCMMjldhF2OBsHvLLuyPL+krBqYuV5xxkl5OQBQ 1igVmmfsE1hJMqo+SlIy0Wgeteq/dIOs0Y9iISwHzCVV88xY9ytz47XoXDS4KO4S6BzB da6rCD3bZqvZJS/6TXrCNPCpQXB56vXcXwNWEnX3bm4w0dgAYllV25TV75XE9C14seH/ kWydCryDh4ORZETF/qB2kdoKNV/8U3RW6/VYXBQ6s7TX7PaVZTTMwxsBE15/kuJbW4yE AHdvLO6rbwPJNiFDEt3kEwFDhoVR64VNQ7wWkes0vRcxy9oRQadcWkew1q2zmryDMIdV 5D8Q== ARC-Authentication-Results: i=2; mx.google.com; dkim=pass header.i=@NXP1.onmicrosoft.com header.s=selector2-NXP1-onmicrosoft-com header.b=iIcxPewQ; arc=pass (i=1 spf=pass spfdomain=oss.nxp.com dkim=pass dkdomain=oss.nxp.com dmarc=pass fromdomain=oss.nxp.com); spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=nxp.com Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id qf28-20020a1709077f1c00b008bb796ffb2bsi6930682ejc.974.2023.02.26.05.07.38; Sun, 26 Feb 2023 05:08:21 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@NXP1.onmicrosoft.com header.s=selector2-NXP1-onmicrosoft-com header.b=iIcxPewQ; arc=pass (i=1 spf=pass spfdomain=oss.nxp.com dkim=pass dkdomain=oss.nxp.com dmarc=pass fromdomain=oss.nxp.com); spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=nxp.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229740AbjBZNCp (ORCPT + 99 others); Sun, 26 Feb 2023 08:02:45 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:42720 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229732AbjBZNCn (ORCPT ); Sun, 26 Feb 2023 08:02:43 -0500 Received: from EUR01-DB5-obe.outbound.protection.outlook.com (mail-db5eur01on2045.outbound.protection.outlook.com [40.107.15.45]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BCC0312F0A; Sun, 26 Feb 2023 05:02:04 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=bQPQyR0z73j2BeVErK/6GGfCROcAB3AlfLESNZHcFQ/8+ufqrmrxQdLMAQDVE8yog3FgEyxtID5rZX3fK1945OlEUe+Ge0elCd4kPkXQxmPy7Rxn/FKs+R5U/0JBje9/f7qj8MWrksZVjrgcuPP8HxNR8gAD2EXmMQKMfn2UkTB0HbMf3FY5lMc4VaYbv1Hoc8vMGi8sbyStg6m+JHlUCB1kmyBFY3GBwhb3syl6yGNlKUL4MAeF2lWMNy/ZL7T5dNRJlveyrEJTUXg2sZANSBZ9CGT2bOhvkbsiu+Q+cz3F7GoljwRWpe7vuJJj5pObWTvE1o4Te7leebKfMo6kSg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=aHeaICmLd1yx0hQWnMlGQCtt6ch+0I5oZCNI8bgMkT0=; b=i0c7DbcPO+7RSJUcJVa9+HnQwDNQY7L7If7DQNCEHlGAGsBDopdHJAeAZ1Km+ddQy/8sSriBuKhyQoWBS84mwnoLg67KNYMv4R4feo/cvlVKt/Hw6lyHNey1GAVgi9LvLvXkg+6+TJlmf5MUEMPS2r00N9ict/ZkkzjDpEDecAlU3sls11sdQWhPu8ffMRmoJbXzj9S8AxKm2I0MY9AK7hDdC3QwAbxB1Cj8ZZfOH/ZqAIlUwSmboua20LFh5Yro15//bkMxz99DF5Evk3+jpHjNXkt6fU20DcuiPHafn5adSYPk3qAeNzqfqaBTGLmyf+aWt6dBdN6ppQ9Cj0SccQ== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=oss.nxp.com; dmarc=pass action=none header.from=oss.nxp.com; dkim=pass header.d=oss.nxp.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=NXP1.onmicrosoft.com; s=selector2-NXP1-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=aHeaICmLd1yx0hQWnMlGQCtt6ch+0I5oZCNI8bgMkT0=; b=iIcxPewQk6cevJRHVaaq/hv9eRsOfkqWgU4Mt+n1v/X3HPuc2Lh9VNujqBYxQ4kJsX2fECLCCtzbSJacq6+/PVX4jKzjdYMegLuWZeuAoGdomYoCzehXe74Fznr4lngsODEtjnmuxXw6nFn+jwPN5+3voH+5QKrvtuJJArYMz98= Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=oss.nxp.com; Received: from DU0PR04MB9417.eurprd04.prod.outlook.com (2603:10a6:10:358::11) by DU2PR04MB8968.eurprd04.prod.outlook.com (2603:10a6:10:2e3::14) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6134.27; Sun, 26 Feb 2023 13:00:51 +0000 Received: from DU0PR04MB9417.eurprd04.prod.outlook.com ([fe80::f55a:cf12:da08:6d2a]) by DU0PR04MB9417.eurprd04.prod.outlook.com ([fe80::f55a:cf12:da08:6d2a%3]) with mapi id 15.20.6134.025; Sun, 26 Feb 2023 13:00:51 +0000 From: "Peng Fan (OSS)" To: gregkh@linuxfoundation.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org, s.hauer@pengutronix.de, xu.yang_2@nxp.com Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, jun.li@nxp.com, Peng Fan Subject: [PATCH V3 4/7] dt-bindings: usb: ci-hdrc-usb2: convert to DT schema format Date: Sun, 26 Feb 2023 21:05:36 +0800 Message-Id: <20230226130539.277336-5-peng.fan@oss.nxp.com> X-Mailer: git-send-email 2.37.1 In-Reply-To: <20230226130539.277336-1-peng.fan@oss.nxp.com> References: <20230226130539.277336-1-peng.fan@oss.nxp.com> X-ClientProxiedBy: SI2P153CA0002.APCP153.PROD.OUTLOOK.COM (2603:1096:4:140::16) To DU0PR04MB9417.eurprd04.prod.outlook.com (2603:10a6:10:358::11) MIME-Version: 1.0 X-MS-Exchange-MessageSentRepresentingType: 1 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: DU0PR04MB9417:EE_|DU2PR04MB8968:EE_ X-MS-Office365-Filtering-Correlation-Id: 430aaf52-91c6-4758-2fdd-08db17f97ca1 X-MS-Exchange-SharedMailbox-RoutingAgent-Processed: True X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255;CTRY:;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:DU0PR04MB9417.eurprd04.prod.outlook.com;PTR:;CAT:NONE;SFS:(13230025)(4636009)(136003)(366004)(39860400002)(346002)(396003)(376002)(451199018)(83380400001)(8676002)(6666004)(38350700002)(38100700002)(86362001)(8936002)(5660300002)(478600001)(30864003)(7416002)(2616005)(26005)(6486002)(966005)(1076003)(6512007)(6506007)(66556008)(66476007)(4326008)(2906002)(66946007)(316002)(52116002)(186003)(41300700001);DIR:OUT;SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: oss.nxp.com X-MS-Exchange-CrossTenant-Network-Message-Id: 430aaf52-91c6-4758-2fdd-08db17f97ca1 X-MS-Exchange-CrossTenant-AuthSource: DU0PR04MB9417.eurprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 26 Feb 2023 13:00:51.2509 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: j+Ou70B9Dhc3D9fayTNOkYgA5GCdWazznqHuRg8j+PcG6WmNAHBOFvQw1PuOVCNjvDeLlMwUlBJF0SJUdGyKfw== X-MS-Exchange-Transport-CrossTenantHeadersStamped: DU2PR04MB8968 X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,RCVD_IN_DNSWL_NONE,RCVD_IN_MSPIKE_H2,SPF_HELO_PASS,SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: =?utf-8?q?INBOX?= X-GMAIL-THRID: =?utf-8?q?1758899104344626874?= X-GMAIL-MSGID: =?utf-8?q?1758899104344626874?= From: Peng Fan Convert the binding to DT schema format. To fix the dtbs_check error, some properties were also added, such as nvidia,phy, reset-names ulpi. Signed-off-by: Peng Fan --- .../devicetree/bindings/usb/ci-hdrc-usb2.txt | 159 ------- .../devicetree/bindings/usb/ci-hdrc-usb2.yaml | 408 ++++++++++++++++++ 2 files changed, 408 insertions(+), 159 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt deleted file mode 100644 index 72ceea575d58..000000000000 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ /dev/null @@ -1,159 +0,0 @@ -* USB2 ChipIdea USB controller for ci13xxx - -Required properties: -- compatible: should be one of: - "fsl,imx23-usb" - "fsl,imx27-usb" - "fsl,imx28-usb" - "fsl,imx6q-usb" - "fsl,imx6sl-usb" - "fsl,imx6sx-usb" - "fsl,imx6ul-usb" - "fsl,imx7d-usb" - "fsl,imx7ulp-usb" - "fsl,imx8mm-usb" - "lsi,zevio-usb" - "qcom,ci-hdrc" - "chipidea,usb2" - "xlnx,zynq-usb-2.20a" - "nvidia,tegra20-udc" - "nvidia,tegra30-udc" - "nvidia,tegra114-udc" - "nvidia,tegra124-udc" -- reg: base address and length of the registers -- interrupts: interrupt for the USB controller - -Recommended properies: -- phy_type: the type of the phy connected to the core. Should be one - of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this - property the PORTSC register won't be touched. -- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg" - -Deprecated properties: -- usb-phy: phandle for the PHY device. Use "phys" instead. -- fsl,usbphy: phandle of usb phy that connects to the port. Use "phys" instead. - -Optional properties: -- clocks: reference to the USB clock -- phys: reference to the USB PHY -- phy-names: should be "usb-phy" -- vbus-supply: reference to the VBUS regulator -- maximum-speed: limit the maximum connection speed to "full-speed". -- tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts -- itc-setting: interrupt threshold control register control, the setting - should be aligned with ITC bits at register USBCMD. -- ahb-burst-config: it is vendor dependent, the required value should be - aligned with AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This - property is used to change AHB burst configuration, check the chipidea - spec for meaning of each value. If this property is not existed, it - will use the reset value. -- tx-burst-size-dword: it is vendor dependent, the tx burst size in dword - (4 bytes), This register represents the maximum length of a the burst - in 32-bit words while moving data from system memory to the USB - bus, the value of this property will only take effect if property - "ahb-burst-config" is set to 0, if this property is missing the reset - default of the hardware implementation will be used. -- rx-burst-size-dword: it is vendor dependent, the rx burst size in dword - (4 bytes), This register represents the maximum length of a the burst - in 32-bit words while moving data from the USB bus to system memory, - the value of this property will only take effect if property - "ahb-burst-config" is set to 0, if this property is missing the reset - default of the hardware implementation will be used. -- extcon: phandles to external connector devices. First phandle should point to - external connector, which provide "USB" cable events, the second should point - to external connector device, which provide "USB-HOST" cable events. If one - of the external connector devices is not required, empty <0> phandle should - be specified. -- phy-clkgate-delay-us: the delay time (us) between putting the PHY into - low power mode and gating the PHY clock. -- non-zero-ttctrl-ttha: after setting this property, the value of register - ttctrl.ttha will be 0x7f; if not, the value will be 0x0, this is the default - value. It needs to be very carefully for setting this property, it is - recommended that consult with your IC engineer before setting this value. - On the most of chipidea platforms, the "usage_tt" flag at RTL is 0, so this - property only affects siTD. - If this property is not set, the max packet size is 1023 bytes, and if - the total of packet size for pervious transactions are more than 256 bytes, - it can't accept any transactions within this frame. The use case is single - transaction, but higher frame rate. - If this property is set, the max packet size is 188 bytes, it can handle - more transactions than above case, it can accept transactions until it - considers the left room size within frame is less than 188 bytes, software - needs to make sure it does not send more than 90% - maximum_periodic_data_per_frame. The use case is multiple transactions, but - less frame rate. -- mux-controls: The mux control for toggling host/device output of this - controller. It's expected that a mux state of 0 indicates device mode and a - mux state of 1 indicates host mode. -- mux-control-names: Shall be "usb_switch" if mux-controls is specified. -- pinctrl-names: Names for optional pin modes in "default", "host", "device". - In case of HSIC-mode, "idle" and "active" pin modes are mandatory. In this - case, the "idle" state needs to pull down the data and strobe pin - and the "active" state needs to pull up the strobe pin. -- pinctrl-n: alternate pin modes - -i.mx specific properties -- fsl,usbmisc: phandler of non-core register device, with one - argument that indicate usb controller index -- disable-over-current: disable over current detect -- over-current-active-low: over current signal polarity is active low. -- over-current-active-high: over current signal polarity is active high. - It's recommended to specify the over current polarity. -- power-active-high: power signal polarity is active high -- external-vbus-divider: enables off-chip resistor divider for Vbus -- samsung,picophy-pre-emp-curr-control: HS Transmitter Pre-Emphasis Current - Control. This signal controls the amount of current sourced to the - USB_OTG*_DP and USB_OTG*_DN pins after a J-to-K or K-to-J transition. - The range is from 0x0 to 0x3, the default value is 0x1. - Details can refer to TXPREEMPAMPTUNE0 bits of USBNC_n_PHY_CFG1. -- samsung,picophy-dc-vol-level-adjust: HS DC Voltage Level Adjustment. - Adjust the high-speed transmitter DC level voltage. - The range is from 0x0 to 0xf, the default value is 0x3. - Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1. - -Example: - - usb@f7ed0000 { - compatible = "chipidea,usb2"; - reg = <0xf7ed0000 0x10000>; - interrupts = ; - clocks = <&chip CLKID_USB0>; - phys = <&usb_phy0>; - phy-names = "usb-phy"; - vbus-supply = <®_usb0_vbus>; - itc-setting = <0x4>; /* 4 micro-frames */ - /* Incremental burst of unspecified length */ - ahb-burst-config = <0x0>; - tx-burst-size-dword = <0x10>; /* 64 bytes */ - rx-burst-size-dword = <0x10>; - extcon = <0>, <&usb_id>; - phy-clkgate-delay-us = <400>; - mux-controls = <&usb_switch>; - mux-control-names = "usb_switch"; - }; - -Example for HSIC: - - usb@2184400 { - compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; - reg = <0x02184400 0x200>; - interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_USBOH3>; - fsl,usbphy = <&usbphynop1>; - fsl,usbmisc = <&usbmisc 2>; - phy_type = "hsic"; - dr_mode = "host"; - ahb-burst-config = <0x0>; - tx-burst-size-dword = <0x10>; - rx-burst-size-dword = <0x10>; - pinctrl-names = "idle", "active"; - pinctrl-0 = <&pinctrl_usbh2_idle>; - pinctrl-1 = <&pinctrl_usbh2_active>; - #address-cells = <1>; - #size-cells = <0>; - - usbnet: ethernet@1 { - compatible = "usb424,9730"; - reg = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml new file mode 100644 index 000000000000..b30ed11fa22f --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml @@ -0,0 +1,408 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ci-hdrc-usb2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB2 ChipIdea USB controller for ci13xxx Binding + +maintainers: + - Xu Yang + - Peng Fan + +properties: + compatible: + oneOf: + - enum: + - chipidea,usb2 + - fsl,imx7ulp-usb + - lsi,zevio-usb + - nvidia,tegra20-udc + - nvidia,tegra30-udc + - nvidia,tegra114-udc + - nvidia,tegra124-udc + - qcom,ci-hdrc + - items: + - enum: + - fsl,imx23-usb + - fsl,imx25-usb + - fsl,imx28-usb + - fsl,imx6q-usb + - fsl,imx6sl-usb + - fsl,imx6sx-usb + - fsl,imx6ul-usb + - fsl,imx7d-usb + - const: fsl,imx27-usb + - items: + - const: fsl,imx8mm-usb + - const: fsl,imx7d-usb + - items: + - const: fsl,imx7ulp-usb + - const: fsl,imx6ul-usb + - items: + - const: xlnx,zynq-usb-2.20a + - const: chipidea,usb2 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + minItems: 1 + maxItems: 2 + + interrupts: + minItems: 1 + maxItems: 2 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + + dr_mode: true + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + maxItems: 1 + + "#reset-cells": + const: 1 + + phy_type: true + + itc-setting: + description: + interrupt threshold control register control, the setting should be + aligned with ITC bits at register USBCMD. + $ref: /schemas/types.yaml#/definitions/uint32 + + ahb-burst-config: + description: + it is vendor dependent, the required value should be aligned with + AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This property is + used to change AHB burst configuration, check the chipidea spec for + meaning of each value. If this property is not existed, it will use + the reset value. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0x7 + + tx-burst-size-dword: + description: + it is vendor dependent, the tx burst size in dword (4 bytes), This + register represents the maximum length of a the burst in 32-bit + words while moving data from system memory to the USB bus, the value + of this property will only take effect if property "ahb-burst-config" + is set to 0, if this property is missing the reset default of the + hardware implementation will be used. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0x20 + + rx-burst-size-dword: + description: + it is vendor dependent, the rx burst size in dword (4 bytes), This + register represents the maximum length of a the burst in 32-bit words + while moving data from the USB bus to system memory, the value of + this property will only take effect if property "ahb-burst-config" + is set to 0, if this property is missing the reset default of the + hardware implementation will be used. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0x20 + + extcon: + description: | + Phandles to external connector devices. First phandle should point + to external connector, which provide "USB" cable events, the second + should point to external connector device, which provide "USB-HOST" + cable events. If one of the external connector devices is not + required, empty <0> phandle should be specified. + + phy-clkgate-delay-us: + description: | + The delay time (us) between putting the PHY into low power mode and + gating the PHY clock. + + non-zero-ttctrl-ttha: + description: | + After setting this property, the value of register ttctrl.ttha + will be 0x7f; if not, the value will be 0x0, this is the default + value. It needs to be very carefully for setting this property, it + is recommended that consult with your IC engineer before setting + this value. On the most of chipidea platforms, the "usage_tt" flag + at RTL is 0, so this property only affects siTD. + + If this property is not set, the max packet size is 1023 bytes, and + if the total of packet size for pervious transactions are more than + 256 bytes, it can't accept any transactions within this frame. The + use case is single transaction, but higher frame rate. + + If this property is set, the max packet size is 188 bytes, it can + handle more transactions than above case, it can accept transactions + until it considers the left room size within frame is less than 188 + bytes, software needs to make sure it does not send more than 90% + maximum_periodic_data_per_frame. The use case is multiple + transactions, but less frame rate. + + mux-controls: + description: | + The mux control for toggling host/device output of this controller. + It's expected that a mux state of 0 indicates device mode and a mux + state of 1 indicates host mode. + maxItems: 1 + + mux-control-names: + const: usb_switch + + pinctrl-names: + description: | + Names for optional pin modes in "default", "host", "device". + In case of HSIC-mode, "idle" and "active" pin modes are mandatory. + In this case, the "idle" state needs to pull down the data and + strobe pin and the "active" state needs to pull up the strobe pin. + + pinctrl-0: + maxItems: 1 + + pinctrl-1: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + const: usb-phy + + vbus-supply: + description: reference to the VBUS regulator. + + fsl,usbmisc: + description: + Phandler of non-core register device, with one argument that + indicate usb controller index + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to usbmisc node + - description: index of usb controller + + fsl,anatop: + description: phandle for the anatop node. + $ref: /schemas/types.yaml#/definitions/phandle + + disable-over-current: + type: boolean + description: disable over current detect + + over-current-active-low: + type: boolean + description: over current signal polarity is active low + + over-current-active-high: + type: boolean + description: | + Over current signal polarity is active high. It's recommended to + specify the over current polarity. + + power-active-high: + type: boolean + description: power signal polarity is active high + + external-vbus-divider: + type: boolean + description: enables off-chip resistor divider for Vbus + + samsung,picophy-pre-emp-curr-control: + description: | + HS Transmitter Pre-Emphasis Current Control. This signal controls + the amount of current sourced to the USB_OTG*_DP and USB_OTG*_DN + pins after a J-to-K or K-to-J transition. The range is from 0x0 to + 0x3, the default value is 0x1. Details can refer to TXPREEMPAMPTUNE0 + bits of USBNC_n_PHY_CFG1. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0x3 + + samsung,picophy-dc-vol-level-adjust: + description: | + HS DC Voltage Level Adjustment. Adjust the high-speed transmitter DC + level voltage. The range is from 0x0 to 0xf, the default value is + 0x3. Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0xf + + usb-phy: + description: phandle for the PHY device. Use "phys" instead. + $ref: /schemas/types.yaml#/definitions/phandle + deprecated: true + + fsl,usbphy: + description: phandle of usb phy that connects to the port. Use "phys" instead. + $ref: /schemas/types.yaml#/definitions/phandle + deprecated: true + + nvidia,phy: + description: phandle of usb phy that connects to the port. Use "phys" instead. + $ref: /schemas/types.yaml#/definitions/phandle + + port: + description: + Any connector to the data bus of this controller should be modelled + using the OF graph bindings specified, if the "usb-role-switch" + property is used. + $ref: /schemas/graph.yaml#/properties/port + + reset-gpios: + maxItems: 1 + + ulpi: + type: object + properties: + phy: + description: The phy child node for Qcom chips. + type: object + $ref: /schemas/phy/qcom,usb-hs-phy.yaml + +patternProperties: + "^.*@[0-9a-f]{1,2}$": + description: The hard wired USB devices + type: object + $ref: /schemas/usb/usb-device.yaml + +dependencies: + port: [ usb-role-switch ] + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: usb-hcd.yaml# + - $ref: usb-drd.yaml# + - if: + properties: + mux-controls: + true + then: + properties: + mux-control-names: + const: usb_switch + - if: + properties: + phy_type: + const: hsic + required: + - phy_type + then: + properties: + pinctrl-names: + items: + - const: idle + - const: active + else: + properties: + pinctrl-names: + minItems: 1 + maxItems: 2 + oneOf: + - items: + - const: default + - enum: + - host + - device + - items: + - const: default + - if: + properties: + compatible: + contains: + enum: + - chipidea,usb2 + - lsi,zevio-usb + - nvidia,tegra20-udc + - nvidia,tegra30-udc + - nvidia,tegra114-udc + - nvidia,tegra124-udc + - qcom,ci-hdrc + - xlnx,zynq-usb-2.20a + then: + properties: + fsl,usbmisc: false + disable-over-current: false + over-current-active-low: false + over-current-active-high: false + power-active-high: false + external-vbus-divider: false + samsung,picophy-pre-emp-curr-control: false + samsung,picophy-dc-vol-level-adjust: false + +unevaluatedProperties: false + +examples: + - | + #include + #include + + usb@f7ed0000 { + compatible = "chipidea,usb2"; + reg = <0xf7ed0000 0x10000>; + interrupts = ; + clocks = <&chip CLKID_USB0>; + phys = <&usb_phy0>; + phy-names = "usb-phy"; + vbus-supply = <®_usb0_vbus>; + itc-setting = <0x4>; /* 4 micro-frames */ + /* Incremental burst of unspecified length */ + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; /* 64 bytes */ + rx-burst-size-dword = <0x10>; + extcon = <0>, <&usb_id>; + phy-clkgate-delay-us = <400>; + mux-controls = <&usb_switch>; + mux-control-names = "usb_switch"; + }; + + # Example for HSIC: + - | + #include + #include + + usb@2184400 { + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc 2>; + phy_type = "hsic"; + dr_mode = "host"; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + pinctrl-names = "idle", "active"; + pinctrl-0 = <&pinctrl_usbh2_idle>; + pinctrl-1 = <&pinctrl_usbh2_active>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usb424,9730"; + reg = <1>; + }; + }; + +...