diff mbox series

[v2,09/13] ARM: dts: qcom: sdx55-t55: Enable PCIe RC support

Message ID 20230224105906.16540-10-manivannan.sadhasivam@linaro.org
State New
Headers
Series Add PCIe RC support to Qcom SDX55 SoC |

Commit Message

Manivannan Sadhasivam Feb. 24, 2023, 10:59 a.m. UTC 
  Enable PCIe RC support on Thundercomm T55 board.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm/boot/dts/qcom-sdx55-t55.dts | 42 ++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

Comments

Konrad Dybcio Feb. 27, 2023, 8:47 a.m. UTC | #1 
On 24.02.2023 11:59, Manivannan Sadhasivam wrote:
> Enable PCIe RC support on Thundercomm T55 board.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm/boot/dts/qcom-sdx55-t55.dts | 42 ++++++++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom-sdx55-t55.dts
> index 7ed8feb99afb..6339af791b0b 100644
> --- a/arch/arm/boot/dts/qcom-sdx55-t55.dts
> +++ b/arch/arm/boot/dts/qcom-sdx55-t55.dts
> @@ -242,6 +242,23 @@ &ipa {
>  	memory-region = <&ipa_fw_mem>;
>  };
>  
> +&pcie_phy {
> +	vdda-phy-supply = <&vreg_l1e_bb_1p2>;
> +	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
> +
> +	status = "okay";
> +};
> +
> +&pcie_rc {
> +	perst-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
> +	wake-gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>;
> +
> +	pinctrl-0 = <&pcie_default>;
> +	pinctrl-names = "default";
> +
> +	status = "okay";
> +};
> +
>  &qpic_bam {
>  	status = "ok";
>  };
> @@ -265,6 +282,31 @@ &remoteproc_mpss {
>  	memory-region = <&mpss_adsp_mem>;
>  };
>  
> +&tlmm {
> +	pcie_default: pcie-default-state {
> +		clkreq-pins {
> +			pins = "gpio56";
> +			function = "pcie_clkreq";
> +			drive-strength = <2>;
> +			bias-pull-up;
> +		};
> +
> +		perst-pins {
> +			pins = "gpio57";
> +			function = "gpio";
> +			drive-strength = <2>;
> +			bias-pull-down;
> +		};
> +
> +		wake-pins {
> +		       pins = "gpio53";
> +		       function = "gpio";
> +		       drive-strength = <2>;
> +		       bias-pull-up;
> +	       };
> +	};
> +};
> +
>  &usb_hsphy {
>  	status = "okay";
>  	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom-sdx55-t55.dts
index 7ed8feb99afb..6339af791b0b 100644
--- a/arch/arm/boot/dts/qcom-sdx55-t55.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-t55.dts
@@ -242,6 +242,23 @@  &ipa {
 	memory-region = <&ipa_fw_mem>;
 };
 
+&pcie_phy {
+	vdda-phy-supply = <&vreg_l1e_bb_1p2>;
+	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
+
+	status = "okay";
+};
+
+&pcie_rc {
+	perst-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
 &qpic_bam {
 	status = "ok";
 };
@@ -265,6 +282,31 @@  &remoteproc_mpss {
 	memory-region = <&mpss_adsp_mem>;
 };
 
+&tlmm {
+	pcie_default: pcie-default-state {
+		clkreq-pins {
+			pins = "gpio56";
+			function = "pcie_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio57";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-pins {
+		       pins = "gpio53";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+	       };
+	};
+};
+
 &usb_hsphy {
 	status = "okay";
 	vdda-pll-supply = <&vreg_l4e_bb_0p875>;