diff mbox series

tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted

Message ID 20230223093941.31790-1-sherry.sun@nxp.com
State New
Headers
Series tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted |

Commit Message

Sherry Sun Feb. 23, 2023, 9:39 a.m. UTC 
  According to LPUART RM, Transmission Complete Flag becomes 0 if queuing
a break character by writing 1 to CTRL[SBK], so here need to skip
waiting for transmission complete when UARTCTRL_SBK is asserted,
otherwise the kernel may stuck here.
And actually set_termios() adds transmission completion waiting to avoid
data loss or data breakage when changing the baud rate, but we don't
need to worry about this when queuing break characters.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 drivers/tty/serial/fsl_lpuart.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index e945f41b93d4..f9e164abf920 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2240,9 +2240,15 @@  lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 	/* update the per-port timeout */
 	uart_update_timeout(port, termios->c_cflag, baud);
 
-	/* wait transmit engin complete */
-	lpuart32_write(&sport->port, 0, UARTMODIR);
-	lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC);
+	/*
+	 * LPUART Transmission Complete Flag may never be set while queuing a break
+	 * character, so skip waiting for transmission complete when UARTCTRL_SBK is
+	 * asserted.
+	 */
+	if (!(old_ctrl & UARTCTRL_SBK)) {
+		lpuart32_write(&sport->port, 0, UARTMODIR);
+		lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC);
+	}
 
 	/* disable transmit and receive */
 	lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE),