net: phy: at803x: fix the wol setting functions
Commit Message
In 7beecaf7d507 ("net: phy: at803x: improve the WOL feature"), it seems
not correct to use a wol_en bit in a 1588 Control Register which is only
available on AR8031/AR8033(share the same phy_id) to determine if WoL is
enabled. Change it back to use AT803X_INTR_ENABLE_WOL for determining
the WoL status which is applicable on all chips supporting wol. Also
update the at803x_set_wol() function to only update the 1588 register on
chips having it. After this change, disabling wol at probe from
d7cd5e06c9dd ("net: phy: at803x: disable WOL at probe") is no longer
needed. So it is removed.
Also remove the set_wol()/get_wol() callbacks from AR8032 which doesn't
support WoL.
Fixes: 7beecaf7d507b ("net: phy: at803x: improve the WOL feature")
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Viorel Suman <viorel.suman@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
---
drivers/net/phy/at803x.c | 42 +++++++++++++++-------------------------
1 file changed, 16 insertions(+), 26 deletions(-)
Comments
On Tue, Feb 21, 2023 at 04:40:31PM -0600, Li Yang wrote:
> In 7beecaf7d507 ("net: phy: at803x: improve the WOL feature"), it seems
> not correct to use a wol_en bit in a 1588 Control Register which is only
> available on AR8031/AR8033(share the same phy_id) to determine if WoL is
> enabled. Change it back to use AT803X_INTR_ENABLE_WOL for determining
> the WoL status which is applicable on all chips supporting wol. Also
> update the at803x_set_wol() function to only update the 1588 register on
> chips having it.
> After this change, disabling wol at probe from
> d7cd5e06c9dd ("net: phy: at803x: disable WOL at probe") is no longer
> needed. So it is removed.
Rather than remove it, please git revert it, and explain in the commit
message why.
>
> Also remove the set_wol()/get_wol() callbacks from AR8032 which doesn't
> support WoL.
This change was part of 5800091a2061 ("net: phy: at803x: add support for AR8032 PHY")
Please break this patch up into individual fixes. The different fixes
might need different levels of backporting etc.
Andrew
> -----Original Message-----
> From: Andrew Lunn <andrew@lunn.ch>
> Sent: Tuesday, February 21, 2023 4:57 PM
> To: Leo Li <leoyang.li@nxp.com>
> Cc: Heiner Kallweit <hkallweit1@gmail.com>; Russell King
> <linux@armlinux.org.uk>; David S . Miller <davem@davemloft.net>; Jakub
> Kicinski <kuba@kernel.org>; Luo Jie <luoj@codeaurora.org>;
> netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Viorel Suman
> <viorel.suman@nxp.com>; Wei Fang <wei.fang@nxp.com>
> Subject: Re: [PATCH] net: phy: at803x: fix the wol setting functions
>
> On Tue, Feb 21, 2023 at 04:40:31PM -0600, Li Yang wrote:
> > In 7beecaf7d507 ("net: phy: at803x: improve the WOL feature"), it
> > seems not correct to use a wol_en bit in a 1588 Control Register which
> > is only available on AR8031/AR8033(share the same phy_id) to determine
> > if WoL is enabled. Change it back to use AT803X_INTR_ENABLE_WOL for
> > determining the WoL status which is applicable on all chips supporting
> > wol. Also update the at803x_set_wol() function to only update the 1588
> > register on chips having it.
>
> > After this change, disabling wol at probe from d7cd5e06c9dd ("net:
> > phy: at803x: disable WOL at probe") is no longer needed. So it is
> > removed.
>
> Rather than remove it, please git revert it, and explain in the commit
> message why.
Not all changes from that patch is removed. The remaining part might still be useful.
>
> >
> > Also remove the set_wol()/get_wol() callbacks from AR8032 which
> > doesn't support WoL.
>
> This change was part of 5800091a2061 ("net: phy: at803x: add support for
> AR8032 PHY")
>
> Please break this patch up into individual fixes. The different fixes might
> need different levels of backporting etc.
Ok. I can split this out.
Regards,
Leo
@@ -461,21 +461,25 @@ static int at803x_set_wol(struct phy_device *phydev,
phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i],
mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
- /* Enable WOL function */
- ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL,
- 0, AT803X_WOL_EN);
- if (ret)
- return ret;
+ /* Enable WOL function for 1588 */
+ if (phydev->drv->phy_id == ATH8031_PHY_ID) {
+ ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL,
+ 0, AT803X_WOL_EN);
+ if (ret)
+ return ret;
+ }
/* Enable WOL interrupt */
ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL);
if (ret)
return ret;
} else {
- /* Disable WoL function */
- ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL,
- AT803X_WOL_EN, 0);
- if (ret)
- return ret;
+ /* Disable WoL function for 1588 */
+ if (phydev->drv->phy_id == ATH8031_PHY_ID) {
+ ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL,
+ AT803X_WOL_EN, 0);
+ if (ret)
+ return ret;
+ }
/* Disable WOL interrupt */
ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0);
if (ret)
@@ -510,11 +514,8 @@ static void at803x_get_wol(struct phy_device *phydev,
wol->supported = WAKE_MAGIC;
wol->wolopts = 0;
- value = phy_read_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL);
- if (value < 0)
- return;
-
- if (value & AT803X_WOL_EN)
+ value = phy_read(phydev, AT803X_INTR_ENABLE);
+ if (value & AT803X_INTR_ENABLE_WOL)
wol->wolopts |= WAKE_MAGIC;
}
@@ -866,9 +867,6 @@ static int at803x_probe(struct phy_device *phydev)
if (phydev->drv->phy_id == ATH8031_PHY_ID) {
int ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
int mode_cfg;
- struct ethtool_wolinfo wol = {
- .wolopts = 0,
- };
if (ccr < 0) {
ret = ccr;
@@ -887,12 +885,6 @@ static int at803x_probe(struct phy_device *phydev)
break;
}
- /* Disable WOL by default */
- ret = at803x_set_wol(phydev, &wol);
- if (ret < 0) {
- phydev_err(phydev, "failed to disable WOL on probe: %d\n", ret);
- goto err;
- }
}
return 0;
@@ -2087,8 +2079,6 @@ static struct phy_driver at803x_driver[] = {
.flags = PHY_POLL_CABLE_TEST,
.config_init = at803x_config_init,
.link_change_notify = at803x_link_change_notify,
- .set_wol = at803x_set_wol,
- .get_wol = at803x_get_wol,
.suspend = at803x_suspend,
.resume = at803x_resume,
/* PHY_BASIC_FEATURES */