diff mbox series

[v4,17/19] riscv: dts: starfive: Add initial StarFive JH7110 device tree

Message ID 20230221024645.127922-18-hal.feng@starfivetech.com
State New
Headers
Series Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC |

Commit Message

Hal Feng Feb. 21, 2023, 2:46 a.m. UTC 
  From: Emil Renner Berthing <kernel@esmil.dk>

Add initial device tree for the JH7110 RISC-V SoC by StarFive
Technology Ltd.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 507 +++++++++++++++++++++++
 1 file changed, 507 insertions(+)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi

Comments

Conor Dooley Feb. 21, 2023, 5:03 p.m. UTC | #1 
On Tue, Feb 21, 2023 at 10:46:43AM +0800, Hal Feng wrote:

> +		S7_0: cpu@0 {
> +			compatible = "sifive,s7", "riscv";
> +			reg = <0>;
> +			d-cache-block-size = <64>;
> +			d-cache-sets = <64>;
> +			d-cache-size = <8192>;
> +			d-tlb-sets = <1>;
> +			d-tlb-size = <40>;
> +			device_type = "cpu";
> +			i-cache-block-size = <64>;
> +			i-cache-sets = <64>;
> +			i-cache-size = <16384>;
> +			i-tlb-sets = <1>;
> +			i-tlb-size = <40>;
> +			mmu-type = "riscv,sv39";
> +			next-level-cache = <&ccache>;
> +			riscv,isa = "rv64imac_zicsr_zba_zbb";

I still think that adding just zicsr here is pointless. If you're going
to be specific, why not also mention that you have zifencei too?

> +			tlb-split;
> +			status = "disabled";
> +
> +			cpu0_intc: interrupt-controller {
> +				compatible = "riscv,cpu-intc";
> +				interrupt-controller;
> +				#interrupt-cells = <1>;
> +			};
> +		};

Rest of this looks fine to me though, thanks for adding the s7
compatible and zba/zbb :)
Hal Feng Feb. 23, 2023, 7:16 a.m. UTC | #2 
On Tue, 21 Feb 2023 17:03:52 +0000, Conor Dooley wrote:
> On Tue, Feb 21, 2023 at 10:46:43AM +0800, Hal Feng wrote:
> 
>> +		S7_0: cpu@0 {
>> +			compatible = "sifive,s7", "riscv";
>> +			reg = <0>;
>> +			d-cache-block-size = <64>;
>> +			d-cache-sets = <64>;
>> +			d-cache-size = <8192>;
>> +			d-tlb-sets = <1>;
>> +			d-tlb-size = <40>;
>> +			device_type = "cpu";
>> +			i-cache-block-size = <64>;
>> +			i-cache-sets = <64>;
>> +			i-cache-size = <16384>;
>> +			i-tlb-sets = <1>;
>> +			i-tlb-size = <40>;
>> +			mmu-type = "riscv,sv39";
>> +			next-level-cache = <&ccache>;
>> +			riscv,isa = "rv64imac_zicsr_zba_zbb";
> 
> I still think that adding just zicsr here is pointless. If you're going
> to be specific, why not also mention that you have zifencei too?

I would like to remove "_zicsr" in the next version. Thanks.

> 
>> +			tlb-split;
>> +			status = "disabled";
>> +
>> +			cpu0_intc: interrupt-controller {
>> +				compatible = "riscv,cpu-intc";
>> +				interrupt-controller;
>> +				#interrupt-cells = <1>;
>> +			};
>> +		};
> 
> Rest of this looks fine to me though, thanks for adding the s7
> compatible and zba/zbb :)

Thanks for your review. :)

Best regards,
Hal
Conor Dooley Feb. 27, 2023, 6:10 p.m. UTC | #3 
On Thu, Feb 23, 2023 at 03:16:51PM +0800, Hal Feng wrote:
> On Tue, 21 Feb 2023 17:03:52 +0000, Conor Dooley wrote:
> > On Tue, Feb 21, 2023 at 10:46:43AM +0800, Hal Feng wrote:
> > 
> >> +		S7_0: cpu@0 {
> >> +			compatible = "sifive,s7", "riscv";
> >> +			reg = <0>;
> >> +			d-cache-block-size = <64>;
> >> +			d-cache-sets = <64>;
> >> +			d-cache-size = <8192>;
> >> +			d-tlb-sets = <1>;
> >> +			d-tlb-size = <40>;
> >> +			device_type = "cpu";
> >> +			i-cache-block-size = <64>;
> >> +			i-cache-sets = <64>;
> >> +			i-cache-size = <16384>;
> >> +			i-tlb-sets = <1>;
> >> +			i-tlb-size = <40>;
> >> +			mmu-type = "riscv,sv39";
> >> +			next-level-cache = <&ccache>;
> >> +			riscv,isa = "rv64imac_zicsr_zba_zbb";
> > 
> > I still think that adding just zicsr here is pointless. If you're going
> > to be specific, why not also mention that you have zifencei too?
> 
> I would like to remove "_zicsr" in the next version. Thanks.
> 
> > 
> >> +			tlb-split;
> >> +			status = "disabled";
> >> +
> >> +			cpu0_intc: interrupt-controller {
> >> +				compatible = "riscv,cpu-intc";
> >> +				interrupt-controller;
> >> +				#interrupt-cells = <1>;
> >> +			};
> >> +		};
> > 
> > Rest of this looks fine to me though, thanks for adding the s7
> > compatible and zba/zbb :)
> 
> Thanks for your review. :)

I hadn't actually given you one yet ;)

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
new file mode 100644
index 000000000000..5a892b3320e5
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -0,0 +1,507 @@ 
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/starfive,jh7110-crg.h>
+#include <dt-bindings/reset/starfive,jh7110-crg.h>
+
+/ {
+	compatible = "starfive,jh7110";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		S7_0: cpu@0 {
+			compatible = "sifive,s7", "riscv";
+			reg = <0>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <8192>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <16384>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imac_zicsr_zba_zbb";
+			tlb-split;
+			status = "disabled";
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		U74_1: cpu@1 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <1>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc_zicsr_zba_zbb";
+			tlb-split;
+
+			cpu1_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		U74_2: cpu@2 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <2>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc_zicsr_zba_zbb";
+			tlb-split;
+
+			cpu2_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		U74_3: cpu@3 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <3>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc_zicsr_zba_zbb";
+			tlb-split;
+
+			cpu3_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		U74_4: cpu@4 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <4>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc_zicsr_zba_zbb";
+			tlb-split;
+
+			cpu4_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&S7_0>;
+				};
+
+				core1 {
+					cpu = <&U74_1>;
+				};
+
+				core2 {
+					cpu = <&U74_2>;
+				};
+
+				core3 {
+					cpu = <&U74_3>;
+				};
+
+				core4 {
+					cpu = <&U74_4>;
+				};
+			};
+		};
+	};
+
+	osc: oscillator {
+		compatible = "fixed-clock";
+		clock-output-names = "osc";
+		#clock-cells = <0>;
+	};
+
+	rtc_osc: rtc-oscillator {
+		compatible = "fixed-clock";
+		clock-output-names = "rtc_osc";
+		#clock-cells = <0>;
+	};
+
+	gmac0_rmii_refin: gmac0-rmii-refin-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "gmac0_rmii_refin";
+		#clock-cells = <0>;
+	};
+
+	gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "gmac0_rgmii_rxin";
+		#clock-cells = <0>;
+	};
+
+	gmac1_rmii_refin: gmac1-rmii-refin-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "gmac1_rmii_refin";
+		#clock-cells = <0>;
+	};
+
+	gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "gmac1_rgmii_rxin";
+		#clock-cells = <0>;
+	};
+
+	i2stx_bclk_ext: i2stx-bclk-ext-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "i2stx_bclk_ext";
+		#clock-cells = <0>;
+	};
+
+	i2stx_lrck_ext: i2stx-lrck-ext-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "i2stx_lrck_ext";
+		#clock-cells = <0>;
+	};
+
+	i2srx_bclk_ext: i2srx-bclk-ext-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "i2srx_bclk_ext";
+		#clock-cells = <0>;
+	};
+
+	i2srx_lrck_ext: i2srx-lrck-ext-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "i2srx_lrck_ext";
+		#clock-cells = <0>;
+	};
+
+	tdm_ext: tdm-ext-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "tdm_ext";
+		#clock-cells = <0>;
+	};
+
+	mclk_ext: mclk-ext-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "mclk_ext";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&plic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clint: timer@2000000 {
+			compatible = "starfive,jh7110-clint", "sifive,clint0";
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>,
+					      <&cpu2_intc 3>, <&cpu2_intc 7>,
+					      <&cpu3_intc 3>, <&cpu3_intc 7>,
+					      <&cpu4_intc 3>, <&cpu4_intc 7>;
+		};
+
+		plic: interrupt-controller@c000000 {
+			compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0";
+			reg = <0x0 0xc000000 0x0 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>,
+					      <&cpu1_intc 11>, <&cpu1_intc 9>,
+					      <&cpu2_intc 11>, <&cpu2_intc 9>,
+					      <&cpu3_intc 11>, <&cpu3_intc 9>,
+					      <&cpu4_intc 11>, <&cpu4_intc 9>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			riscv,ndev = <136>;
+		};
+
+		ccache: cache-controller@2010000 {
+			compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache";
+			reg = <0x0 0x2010000 0x0 0x4000>;
+			interrupts = <1>, <3>, <4>, <2>;
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <2048>;
+			cache-size = <2097152>;
+			cache-unified;
+		};
+
+		uart0: serial@10000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x10000000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART0_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART0_APB>;
+			interrupts = <32>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart1: serial@10010000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x10010000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART1_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART1_APB>;
+			interrupts = <33>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart2: serial@10020000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x10020000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART2_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART2_APB>;
+			interrupts = <34>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@10030000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10030000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C0_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C0_APB>;
+			interrupts = <35>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@10040000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10040000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C1_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C1_APB>;
+			interrupts = <36>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@10050000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10050000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C2_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C2_APB>;
+			interrupts = <37>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		uart3: serial@12000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x12000000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART3_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART3_APB>;
+			interrupts = <45>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart4: serial@12010000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x12010000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART4_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART4_APB>;
+			interrupts = <46>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart5: serial@12020000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x12020000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART5_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART5_APB>;
+			interrupts = <47>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@12030000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x12030000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C3_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C3_APB>;
+			interrupts = <48>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@12040000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x12040000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C4_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C4_APB>;
+			interrupts = <49>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@12050000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x12050000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C5_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C5_APB>;
+			interrupts = <50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@12060000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x12060000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C6_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C6_APB>;
+			interrupts = <51>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		syscrg: clock-controller@13020000 {
+			compatible = "starfive,jh7110-syscrg";
+			reg = <0x0 0x13020000 0x0 0x10000>;
+			clocks = <&osc>, <&gmac1_rmii_refin>,
+				 <&gmac1_rgmii_rxin>,
+				 <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
+				 <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
+				 <&tdm_ext>, <&mclk_ext>;
+			clock-names = "osc", "gmac1_rmii_refin",
+				      "gmac1_rgmii_rxin",
+				      "i2stx_bclk_ext", "i2stx_lrck_ext",
+				      "i2srx_bclk_ext", "i2srx_lrck_ext",
+				      "tdm_ext", "mclk_ext";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		sysgpio: pinctrl@13040000 {
+			compatible = "starfive,jh7110-sys-pinctrl";
+			reg = <0x0 0x13040000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_IOMUX_APB>;
+			resets = <&syscrg JH7110_SYSRST_IOMUX_APB>;
+			interrupts = <86>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		aoncrg: clock-controller@17000000 {
+			compatible = "starfive,jh7110-aoncrg";
+			reg = <0x0 0x17000000 0x0 0x10000>;
+			clocks = <&osc>, <&rtc_osc>,
+				 <&gmac0_rmii_refin>, <&gmac0_rgmii_rxin>,
+				 <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
+				 <&syscrg JH7110_SYSCLK_APB_BUS>,
+				 <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>;
+			clock-names = "osc", "rtc_osc", "gmac0_rmii_refin",
+				      "gmac0_rgmii_rxin", "stg_axiahb",
+				      "apb_bus", "gmac0_gtxclk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		aongpio: pinctrl@17020000 {
+			compatible = "starfive,jh7110-aon-pinctrl";
+			reg = <0x0 0x17020000 0x0 0x10000>;
+			resets = <&aoncrg JH7110_AONRST_IOMUX>;
+			interrupts = <85>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};