From patchwork Fri Feb 17 11:08:27 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 58501 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:adf:eb09:0:0:0:0:0 with SMTP id s9csp827979wrn; Fri, 17 Feb 2023 03:16:35 -0800 (PST) X-Google-Smtp-Source: AK7set/JkPPKWIPRN/mAb0EM2LFt5dQofHzxXUn1sOVVADfktY7YWIh08AbFgS6dNEeLr8N1puR0 X-Received: by 2002:a62:190a:0:b0:592:629a:c9b5 with SMTP id 10-20020a62190a000000b00592629ac9b5mr833349pfz.14.1676632594438; Fri, 17 Feb 2023 03:16:34 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1676632594; cv=none; d=google.com; s=arc-20160816; b=gTfx3EqiPBZ2fEZ2J24I9PrrDq9SoF62WP/wQ3EgHsqyW+NEVX7LEh4+90i/3k8R8z 8Z1ztXUmMosvN6b03jD9LNKii06maTz9FjHXWonlWk8HeLBkEWhtZvQowUCVOQdqiCg1 7S5iVlwLgJ311E/7BlL+a1Jq3kG2aQ/EGjZfiPOJkHDl2HjmmuE7WWrViwfMJ6xDNm01 GCrIX/Yt2GJhPbvtuISadRo3Drxg324T4xIcw9qEytofW9MLCQF+uw7/prXbyAv6Q/ij tGil+H0DaWOoh4yQQGPOVApZbWfiOl8ouRe9ngcBP2EXMvW5LX3t4rnEC+P4GYxMP1M/ vVhw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=fmvW51s/G6sbMutj7IsS8dP6D7vZZheWzdfjfS0rHbM=; b=ImzpLJJcUXFFTRpL4cn5hp3KTfK7veIIBvdJ2ZpbRukIEst+3raEqpmeSuQ3JwgCed Edlmnq4VfcmUPQeg/xnRUNz1gnKbZ6MdSGn4Rp3f8fU0uVGmIZ9GklbIBVd8PIW8qNZJ rkDtetnhxYCfdpN1jByRiuqUUrCIoR74C1azkw8hI5aGUNsDrRDD1byE0QEMsjRJAEqt 1AOF8RStneUjEipDRcBVNn0sz5vAg48RPLL8yx9te0958NJhzS1+LVQ5AEITamqD2jn2 Qx3YvXJz1yazwfw2I40GHoxCPcdJsU6aPVAmQlMAO3Q4DY+f70Ivfuj1j18NuLC7nSfQ /bYg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=xmsgkMVk; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id a24-20020aa794b8000000b005a8ee77aba1si3446890pfl.171.2023.02.17.03.16.22; Fri, 17 Feb 2023 03:16:34 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=xmsgkMVk; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230119AbjBQLJq (ORCPT + 99 others); Fri, 17 Feb 2023 06:09:46 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:44140 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229927AbjBQLJM (ORCPT ); Fri, 17 Feb 2023 06:09:12 -0500 Received: from mail-lf1-x12b.google.com (mail-lf1-x12b.google.com [IPv6:2a00:1450:4864:20::12b]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4850F66672 for ; Fri, 17 Feb 2023 03:08:34 -0800 (PST) Received: by mail-lf1-x12b.google.com with SMTP id u22so1306382lfu.5 for ; Fri, 17 Feb 2023 03:08:34 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=fmvW51s/G6sbMutj7IsS8dP6D7vZZheWzdfjfS0rHbM=; b=xmsgkMVkmol7HCMHm8q7Dy+YjxIMqOssIZH8h7VRpfV9/z4TH5hh8NafXiTsRdhwmB b45UkkSdwqc3uSDCUWfoosgi68royVu0HRrBoK2sEIqOkRCHJkqMUBph0rifyDFpaR+a I0ZojlvVCgzBi4pErOQBf4COIti1TH+7RikqSDAWytqg+EqklfSf7lCyK01Q6GgYITLi MtdeEh8IDy0jV8LY60E7hfQjvsCestacYslfCPcfZmcoTbjzAitZZ7E5XlvoEZTIS5zs AHClU/07Uy2NdHyEIdKhV3bPDU7OhB3I75zZUSHl6PQQ43+o9cM1oVTflUKgn1DcOrk7 wXlg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=fmvW51s/G6sbMutj7IsS8dP6D7vZZheWzdfjfS0rHbM=; b=mPPP6LE9t7jhNp64YUych5A59qan1VckGQmzWegiwt5cfvq2CFDxbXj7XY6m3aQfpH xaQXkWqRcwhs0aHjokvAEUoC1PzCh8MHb0LkgkYFSoDyG/jflu4E6/LJwrK+0I2jxnYg 9c1aen8H7Zh9Kar/UbBM9t+B69nhxuexLi6gPefTMntISoVydfAN3VANslU72Ya4/pqh JHnslcEhrFI4GXc6+TdwAhB52XeXACE+b07bWK5tt8VWfcEwE/4bWVlRCvp+NtxDQicH jsF421Xcc7xKQUBAuQLm+nmj3TRTRKn5Btq9koqaZh65tbChXot65etZYuPam5Ymx/Lm inQg== X-Gm-Message-State: AO0yUKW9mRn1XpU/YmVIxymoNc8fTqAVGQwFR4oilp3lkgRhwI5dQ2mT YmqG5xDgwcO+eq6us5nn8KD/RQ== X-Received: by 2002:a05:6512:149:b0:4db:513f:fe2a with SMTP id m9-20020a056512014900b004db513ffe2amr270509lfo.23.1676632112466; Fri, 17 Feb 2023 03:08:32 -0800 (PST) Received: from [192.168.1.101] (abxh117.neoplus.adsl.tpnet.pl. [83.9.1.117]) by smtp.gmail.com with ESMTPSA id a12-20020a056512020c00b004b57162edfasm640162lfo.117.2023.02.17.03.08.30 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 17 Feb 2023 03:08:32 -0800 (PST) From: Konrad Dybcio Date: Fri, 17 Feb 2023 12:08:27 +0100 Subject: [PATCH v10 4/6] soc: qcom: cpr: Move common functions to new file MIME-Version: 1.0 Message-Id: <20230217-topic-cpr3h-v10-4-67aed8fdfa61@linaro.org> References: <20230217-topic-cpr3h-v10-0-67aed8fdfa61@linaro.org> In-Reply-To: <20230217-topic-cpr3h-v10-0-67aed8fdfa61@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Konrad Dybcio , AngeloGioacchino Del Regno X-Mailer: b4 0.12.1 X-Developer-Signature: v=1; a=ed25519-sha256; t=1676632104; l=28757; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=jxVKVdhwcrqB2lvEmrvI/SSKr0TpIAxzV+SU+2yQU2o=; b=07spDcptrafr+/EcMAtPhp9CT8rhKz4Zf7gAdaqJaJHKeA4UPwrtMFrbCjjsyjGU0RPRjT3eVDu2 6LQeeN8uBqVQFFAQKuAUWbmKJMkolNdoX098Z/H+Q+2tFAquknUO X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_NONE, SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: =?utf-8?q?INBOX?= X-GMAIL-THRID: =?utf-8?q?1758076699186610479?= X-GMAIL-MSGID: =?utf-8?q?1758076699186610479?= From: AngeloGioacchino Del Regno In preparation for implementing a new driver that will be handling CPRv3, CPRv4 and CPR-Hardened, format out common functions to a new file. Update cpr_get_fuses in preparation for CPR3 implementation, change parameters where necessary to not take cpr.c private data structures. Signed-off-by: AngeloGioacchino Del Regno [Konrad: rebase, apply review comments, don't break backwards compat, improve msg] Signed-off-by: Konrad Dybcio --- drivers/soc/qcom/Makefile | 2 +- drivers/soc/qcom/cpr-common.c | 363 +++++++++++++++++++++++++++++++++++++++ drivers/soc/qcom/cpr-common.h | 108 ++++++++++++ drivers/soc/qcom/cpr.c | 386 +++--------------------------------------- 4 files changed, 494 insertions(+), 365 deletions(-) diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index 6e88da899f60..c3a5bf014265 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -3,7 +3,7 @@ CFLAGS_rpmh-rsc.o := -I$(src) obj-$(CONFIG_QCOM_AOSS_QMP) += qcom_aoss.o obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o -obj-$(CONFIG_QCOM_CPR) += cpr.o +obj-$(CONFIG_QCOM_CPR) += cpr-common.o cpr.o obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o obj-$(CONFIG_QCOM_OCMEM) += ocmem.o diff --git a/drivers/soc/qcom/cpr-common.c b/drivers/soc/qcom/cpr-common.c new file mode 100644 index 000000000000..7c877b263241 --- /dev/null +++ b/drivers/soc/qcom/cpr-common.c @@ -0,0 +1,363 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cpr-common.h" + +int cpr_populate_ring_osc_idx(struct device *dev, + struct fuse_corner *fuse_corner, + const struct cpr_fuse *cpr_fuse, + int num_fuse_corners) +{ + struct fuse_corner *end = fuse_corner + num_fuse_corners; + u32 data; + int ret; + + for (; fuse_corner < end; fuse_corner++, cpr_fuse++) { + ret = nvmem_cell_read_variable_le_u32(dev, cpr_fuse->ring_osc, &data); + if (ret) + return ret; + fuse_corner->ring_osc_idx = data; + } + + return 0; +} +EXPORT_SYMBOL_GPL(cpr_populate_ring_osc_idx); + +static int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV, + int adj, int step_volt, const char *init_v_efuse, + struct device *dev) +{ + int steps, uV; + u32 bits = 0; + int ret; + + ret = nvmem_cell_read_variable_le_u32(dev, init_v_efuse, &bits); + if (ret) + return ret; + + steps = bits & (BIT(init_v_width - 1) - 1); + /* Not two's complement.. instead highest bit is sign bit */ + if (bits & BIT(init_v_width - 1)) + steps = -steps; + + uV = ref_uV + steps * step_size_uV; + + /* Apply open-loop fixed adjustments to fused values */ + uV += adj; + + return DIV_ROUND_UP(uV, step_volt) * step_volt; +} + +const struct cpr_fuse *cpr_get_fuses(struct device *dev, int tid, + unsigned int num_fuse_corners) +{ + struct cpr_fuse *fuses; + unsigned int i; + char cpr_name[11]; /* length of "cpr" + length of UINT_MAX (7) + \0 */ + + fuses = devm_kcalloc(dev, num_fuse_corners, sizeof(*fuses), GFP_KERNEL); + if (!fuses) + return ERR_PTR(-ENOMEM); + + /* Support legacy bindings */ + if (tid == UINT_MAX) + snprintf(cpr_name, sizeof(cpr_name), "cpr"); + else + snprintf(cpr_name, sizeof(cpr_name), "cpr%d", tid); + + for (i = 0; i < num_fuse_corners; i++) { + char tbuf[50]; + + snprintf(tbuf, sizeof(tbuf), "%s_ring_osc%d", cpr_name, i + 1); + fuses[i].ring_osc = devm_kstrdup(dev, tbuf, GFP_KERNEL); + if (!fuses[i].ring_osc) + return ERR_PTR(-ENOMEM); + + snprintf(tbuf, sizeof(tbuf), "%s_init_voltage%d", cpr_name, i + 1); + fuses[i].init_voltage = devm_kstrdup(dev, tbuf, GFP_KERNEL); + if (!fuses[i].init_voltage) + return ERR_PTR(-ENOMEM); + + snprintf(tbuf, sizeof(tbuf), "%s_quotient%d", cpr_name, i + 1); + fuses[i].quotient = devm_kstrdup(dev, tbuf, GFP_KERNEL); + if (!fuses[i].quotient) + return ERR_PTR(-ENOMEM); + + snprintf(tbuf, sizeof(tbuf), "%s_quotient_offset%d", cpr_name, i + 1); + fuses[i].quotient_offset = devm_kstrdup(dev, tbuf, GFP_KERNEL); + if (!fuses[i].quotient_offset) + return ERR_PTR(-ENOMEM); + } + + return fuses; +} +EXPORT_SYMBOL_GPL(cpr_get_fuses); + +int cpr_populate_fuse_common(struct device *dev, + struct fuse_corner_data *fdata, + const struct cpr_fuse *cpr_fuse, + struct fuse_corner *fuse_corner, + int step_volt, int init_v_width, + int init_v_step) +{ + int uV, ret; + + /* Populate uV */ + uV = cpr_read_fuse_uV(init_v_width, init_v_step, + fdata->ref_uV, fdata->volt_oloop_adjust, + step_volt, cpr_fuse->init_voltage, dev); + if (uV < 0) + return uV; + + /* + * Update SoC voltages: platforms might choose a different + * regulators than the one used to characterize the algorithms + * (ie, init_voltage_step). + */ + fdata->min_uV = roundup(fdata->min_uV, step_volt); + fdata->max_uV = roundup(fdata->max_uV, step_volt); + + fuse_corner->min_uV = fdata->min_uV; + fuse_corner->max_uV = fdata->max_uV; + fuse_corner->uV = clamp(uV, fuse_corner->min_uV, fuse_corner->max_uV); + + /* Populate target quotient by scaling */ + ret = nvmem_cell_read_variable_le_u32(dev, cpr_fuse->quotient, &fuse_corner->quot); + if (ret) + return ret; + + fuse_corner->quot *= fdata->quot_scale; + fuse_corner->quot += fdata->quot_offset; + fuse_corner->quot += fdata->quot_adjust; + + return 0; +} +EXPORT_SYMBOL_GPL(cpr_populate_fuse_common); + +int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk, + struct corner *corners, int num_corners) +{ + unsigned long rate; + struct corner *iter, *corner; + const struct corner *end; + unsigned int i = 0; + + if (!cpu_clk) { + dev_err(dev, "cannot get rate from NULL clk\n"); + return -EINVAL; + } + + end = &corners[num_corners - 1]; + rate = clk_get_rate(cpu_clk); + + /* + * Some bootloaders set a CPU clock frequency that is not defined + * in the OPP table. When running at an unlisted frequency, + * cpufreq_online() will change to the OPP which has the lowest + * frequency, at or above the unlisted frequency. + * Since cpufreq_online() always "rounds up" in the case of an + * unlisted frequency, this function always "rounds down" in case + * of an unlisted frequency. That way, when cpufreq_online() + * triggers the first ever call to cpr_set_performance_state(), + * it will correctly determine the direction as UP. + */ + for (iter = corners; iter <= end; iter++) { + if (iter->freq > rate) + break; + i++; + if (iter->freq == rate) { + corner = iter; + break; + } + if (iter->freq < rate) + corner = iter; + } + + if (!corner) { + dev_err(dev, "boot up corner not found\n"); + return -EINVAL; + } + + dev_dbg(dev, "boot up perf state: %u\n", i); + + return 0; +} +EXPORT_SYMBOL_GPL(cpr_find_initial_corner); + +unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp, u32 tid) +{ + struct device_node *np; + u32 fc; + + np = dev_pm_opp_get_of_node(opp); + if (of_property_read_u32_index(np, "qcom,opp-fuse-level", tid, &fc)) { + pr_debug("%s: missing 'qcom,opp-fuse-level' property\n", + __func__); + fc = 0; + } + + of_node_put(np); + + return fc; +} +EXPORT_SYMBOL_GPL(cpr_get_fuse_corner); + +unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, + struct device *cpu_dev) +{ + u64 rate = 0; + struct device_node *ref_np; + struct device_node *desc_np; + struct device_node *child_np = NULL; + struct device_node *child_req_np = NULL; + + desc_np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); + if (!desc_np) + return 0; + + ref_np = dev_pm_opp_get_of_node(ref); + if (!ref_np) + goto out_ref; + + for_each_available_child_of_node(desc_np, child_np) { + child_req_np = of_parse_phandle(child_np, "required-opps", 0); + + if (child_np && child_req_np == ref_np) { + of_property_read_u64(child_np, "opp-hz", &rate); + goto out; + } + } + +out: + of_node_put(child_req_np); + of_node_put(child_np); + of_node_put(ref_np); +out_ref: + of_node_put(desc_np); + + return (unsigned long) rate; +} +EXPORT_SYMBOL_GPL(cpr_get_opp_hz_for_req); + +int cpr_calculate_scaling(struct device *dev, + const char *quot_offset, + const struct fuse_corner_data *fdata, + const struct corner *corner) +{ + const struct fuse_corner *fuse, *prev_fuse; + u64 freq_diff; + u32 quot_diff = 0; + int scaling, ret; + + fuse = corner->fuse_corner; + prev_fuse = fuse - 1; + + if (quot_offset) { + ret = nvmem_cell_read_variable_le_u32(dev, quot_offset, "_diff); + if (ret) + return ret; + + quot_diff *= fdata->quot_offset_scale; + quot_diff += fdata->quot_offset_adjust; + } else { + quot_diff = fuse->quot - prev_fuse->quot; + } + + freq_diff = fuse->max_freq - prev_fuse->max_freq; + freq_diff = div_u64(freq_diff, 1000000); /* Convert to MHz */ + scaling = 1000 * quot_diff; + do_div(scaling, freq_diff); + return min(scaling, fdata->max_quot_scale); +} +EXPORT_SYMBOL_GPL(cpr_calculate_scaling); + +int cpr_interpolate(const struct corner *corner, int step_volt, + const struct fuse_corner_data *fdata) +{ + unsigned long f_high, f_low, f_diff; + int uV_high, uV_low, uV; + u64 temp, temp_limit; + const struct fuse_corner *fuse, *prev_fuse; + + fuse = corner->fuse_corner; + prev_fuse = fuse - 1; + + f_high = fuse->max_freq; + f_low = prev_fuse->max_freq; + uV_high = fuse->uV; + uV_low = prev_fuse->uV; + f_diff = fuse->max_freq - corner->freq; + + /* + * Don't interpolate in the wrong direction. This could happen + * if the adjusted fuse voltage overlaps with the previous fuse's + * adjusted voltage. + */ + if (f_high <= f_low || uV_high <= uV_low || f_high <= corner->freq) + return corner->uV; + + temp = f_diff * (uV_high - uV_low); + temp = div64_ul(temp, f_high - f_low); + + /* + * max_volt_scale has units of uV/MHz while freq values + * have units of Hz. Divide by 1000000 to convert to. + */ + temp_limit = f_diff * fdata->max_volt_scale; + do_div(temp_limit, 1000000); + + uV = uV_high - min(temp, temp_limit); + return roundup(uV, step_volt); +} +EXPORT_SYMBOL_GPL(cpr_interpolate); + +int cpr_check_vreg_constraints(struct device *dev, struct regulator *vreg, + struct fuse_corner *f) +{ + int ret; + + ret = regulator_is_supported_voltage(vreg, f->min_uV, f->min_uV); + if (!ret) { + dev_err(dev, "min uV: %d not supported by regulator\n", + f->min_uV); + return -EINVAL; + } + + ret = regulator_is_supported_voltage(vreg, f->max_uV, f->max_uV); + if (!ret) { + dev_err(dev, "max uV: %d not supported by regulator\n", + f->max_uV); + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(cpr_check_vreg_constraints); + +MODULE_DESCRIPTION("Core Power Reduction (CPR) common"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/soc/qcom/cpr-common.h b/drivers/soc/qcom/cpr-common.h new file mode 100644 index 000000000000..2cd15f7eac90 --- /dev/null +++ b/drivers/soc/qcom/cpr-common.h @@ -0,0 +1,108 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#include +#include +#include +#include + +enum voltage_change_dir { + NO_CHANGE, + DOWN, + UP, +}; + +struct fuse_corner_data { + int ref_uV; + int max_uV; + int min_uV; + int range_uV; + /* fuse volt: closed/open loop */ + int volt_cloop_adjust; + int volt_oloop_adjust; + int max_volt_scale; + int max_quot_scale; + /* fuse quot */ + int quot_offset; + int quot_scale; + int quot_adjust; + /* fuse quot_offset */ + int quot_offset_scale; + int quot_offset_adjust; +}; + +struct cpr_fuse { + char *ring_osc; + char *init_voltage; + char *quotient; + char *quotient_offset; +}; + +struct fuse_corner { + int min_uV; + int max_uV; + int uV; + int quot; + int step_quot; + const struct reg_sequence *accs; + int num_accs; + unsigned long max_freq; + u8 ring_osc_idx; +}; + +struct corner { + int min_uV; + int max_uV; + int uV; + int last_uV; + int quot_adjust; + u32 save_ctl; + u32 save_irq; + unsigned long freq; + bool is_open_loop; + struct fuse_corner *fuse_corner; +}; + +struct corner_data { + unsigned int fuse_corner; + unsigned long freq; +}; + +struct acc_desc { + unsigned int enable_reg; + u32 enable_mask; + + struct reg_sequence *config; + struct reg_sequence *settings; + int num_regs_per_fuse; +}; + +struct cpr_acc_desc { + const struct cpr_desc *cpr_desc; + const struct acc_desc *acc_desc; +}; + +int cpr_populate_ring_osc_idx(struct device *dev, + struct fuse_corner *fuse_corner, + const struct cpr_fuse *cpr_fuse, + int num_fuse_corners); +const struct cpr_fuse *cpr_get_fuses(struct device *dev, int tid, + unsigned int num_fuse_corners); +int cpr_populate_fuse_common(struct device *dev, + struct fuse_corner_data *fdata, + const struct cpr_fuse *cpr_fuse, + struct fuse_corner *fuse_corner, + int step_volt, int init_v_width, + int init_v_step); +int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk, + struct corner *corners, int num_corners); +u32 cpr_get_fuse_corner(struct dev_pm_opp *opp, u32 tid); +unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, + struct device *cpu_dev); +int cpr_calculate_scaling(struct device *dev, + const char *quot_offset, + const struct fuse_corner_data *fdata, + const struct corner *corner); +int cpr_interpolate(const struct corner *corner, int step_volt, + const struct fuse_corner_data *fdata); +int cpr_check_vreg_constraints(struct device *dev, struct regulator *vreg, + struct fuse_corner *f); \ No newline at end of file diff --git a/drivers/soc/qcom/cpr.c b/drivers/soc/qcom/cpr.c index 144ea68e0920..0229403bbd87 100644 --- a/drivers/soc/qcom/cpr.c +++ b/drivers/soc/qcom/cpr.c @@ -26,6 +26,8 @@ #include #include +#include "cpr-common.h" + /* Register Offsets for RB-CPR and Bit Definitions */ /* RBCPR Version Register */ @@ -124,45 +126,12 @@ #define FUSE_REVISION_UNKNOWN (-1) -enum voltage_change_dir { - NO_CHANGE, - DOWN, - UP, -}; - -struct cpr_fuse { - char *ring_osc; - char *init_voltage; - char *quotient; - char *quotient_offset; -}; - -struct fuse_corner_data { - int ref_uV; - int max_uV; - int min_uV; - int max_volt_scale; - int max_quot_scale; - /* fuse quot */ - int quot_offset; - int quot_scale; - int quot_adjust; - /* fuse quot_offset */ - int quot_offset_scale; - int quot_offset_adjust; -}; - struct cpr_fuses { int init_voltage_step; int init_voltage_width; struct fuse_corner_data *fuse_corner_data; }; -struct corner_data { - unsigned int fuse_corner; - unsigned long freq; -}; - struct cpr_desc { unsigned int num_fuse_corners; int min_diff_quot; @@ -184,44 +153,6 @@ struct cpr_desc { bool reduce_to_corner_uV; }; -struct acc_desc { - unsigned int enable_reg; - u32 enable_mask; - - struct reg_sequence *config; - struct reg_sequence *settings; - int num_regs_per_fuse; -}; - -struct cpr_acc_desc { - const struct cpr_desc *cpr_desc; - const struct acc_desc *acc_desc; -}; - -struct fuse_corner { - int min_uV; - int max_uV; - int uV; - int quot; - int step_quot; - const struct reg_sequence *accs; - int num_accs; - unsigned long max_freq; - u8 ring_osc_idx; -}; - -struct corner { - int min_uV; - int max_uV; - int uV; - int last_uV; - int quot_adjust; - u32 save_ctl; - u32 save_irq; - unsigned long freq; - struct fuse_corner *fuse_corner; -}; - struct cpr_drv { unsigned int num_corners; unsigned int ref_clk_khz; @@ -801,50 +732,6 @@ static int cpr_set_performance_state(struct generic_pm_domain *domain, return ret; } -static int -cpr_populate_ring_osc_idx(struct cpr_drv *drv) -{ - struct fuse_corner *fuse = drv->fuse_corners; - struct fuse_corner *end = fuse + drv->desc->num_fuse_corners; - const struct cpr_fuse *fuses = drv->cpr_fuses; - u32 data; - int ret; - - for (; fuse < end; fuse++, fuses++) { - ret = nvmem_cell_read_variable_le_u32(drv->dev, fuses->ring_osc, &data); - if (ret) - return ret; - fuse->ring_osc_idx = data; - } - - return 0; -} - -static int cpr_read_fuse_uV(const struct cpr_desc *desc, - const struct fuse_corner_data *fdata, - const char *init_v_efuse, - int step_volt, - struct cpr_drv *drv) -{ - int step_size_uV, steps, uV; - u32 bits = 0; - int ret; - - ret = nvmem_cell_read_variable_le_u32(drv->dev, init_v_efuse, &bits); - if (ret) - return ret; - - steps = bits & ~BIT(desc->cpr_fuses.init_voltage_width - 1); - /* Not two's complement.. instead highest bit is sign bit */ - if (bits & BIT(desc->cpr_fuses.init_voltage_width - 1)) - steps = -steps; - - step_size_uV = desc->cpr_fuses.init_voltage_step; - - uV = fdata->ref_uV + steps * step_size_uV; - return DIV_ROUND_UP(uV, step_volt) * step_volt; -} - static int cpr_fuse_corner_init(struct cpr_drv *drv) { const struct cpr_desc *desc = drv->desc; @@ -854,7 +741,6 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv) unsigned int step_volt; struct fuse_corner_data *fdata; struct fuse_corner *fuse, *end; - int uV; const struct reg_sequence *accs; int ret; @@ -870,23 +756,15 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv) fdata = desc->cpr_fuses.fuse_corner_data; for (i = 0; fuse <= end; fuse++, fuses++, i++, fdata++) { - /* - * Update SoC voltages: platforms might choose a different - * regulators than the one used to characterize the algorithms - * (ie, init_voltage_step). - */ - fdata->min_uV = roundup(fdata->min_uV, step_volt); - fdata->max_uV = roundup(fdata->max_uV, step_volt); + ret = cpr_populate_fuse_common(drv->dev, fdata, fuses, + fuse, step_volt, + desc->cpr_fuses.init_voltage_width, + desc->cpr_fuses.init_voltage_step); + if (ret) + return ret; - /* Populate uV */ - uV = cpr_read_fuse_uV(desc, fdata, fuses->init_voltage, - step_volt, drv); - if (uV < 0) - return uV; - fuse->min_uV = fdata->min_uV; - fuse->max_uV = fdata->max_uV; - fuse->uV = clamp(uV, fuse->min_uV, fuse->max_uV); + fuse->step_quot = desc->step_quot[fuse->ring_osc_idx]; if (fuse == end) { /* @@ -924,25 +802,9 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv) else if (fuse->uV < fuse->min_uV) fuse->uV = fuse->min_uV; - ret = regulator_is_supported_voltage(drv->vdd_apc, - fuse->min_uV, - fuse->min_uV); - if (!ret) { - dev_err(drv->dev, - "min uV: %d (fuse corner: %d) not supported by regulator\n", - fuse->min_uV, i); - return -EINVAL; - } - - ret = regulator_is_supported_voltage(drv->vdd_apc, - fuse->max_uV, - fuse->max_uV); - if (!ret) { - dev_err(drv->dev, - "max uV: %d (fuse corner: %d) not supported by regulator\n", - fuse->max_uV, i); - return -EINVAL; - } + ret = cpr_check_vreg_constraints(drv->dev, drv->vdd_apc, fuse); + if (ret) + return ret; dev_dbg(drv->dev, "fuse corner %d: [%d %d %d] RO%hhu quot %d squot %d\n", @@ -953,126 +815,6 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv) return 0; } -static int cpr_calculate_scaling(const char *quot_offset, - struct cpr_drv *drv, - const struct fuse_corner_data *fdata, - const struct corner *corner) -{ - u32 quot_diff = 0; - unsigned long freq_diff; - int scaling; - const struct fuse_corner *fuse, *prev_fuse; - int ret; - - fuse = corner->fuse_corner; - prev_fuse = fuse - 1; - - if (quot_offset) { - ret = nvmem_cell_read_variable_le_u32(drv->dev, quot_offset, "_diff); - if (ret) - return ret; - - quot_diff *= fdata->quot_offset_scale; - quot_diff += fdata->quot_offset_adjust; - } else { - quot_diff = fuse->quot - prev_fuse->quot; - } - - freq_diff = fuse->max_freq - prev_fuse->max_freq; - freq_diff /= 1000000; /* Convert to MHz */ - scaling = 1000 * quot_diff / freq_diff; - return min(scaling, fdata->max_quot_scale); -} - -static int cpr_interpolate(const struct corner *corner, int step_volt, - const struct fuse_corner_data *fdata) -{ - unsigned long f_high, f_low, f_diff; - int uV_high, uV_low, uV; - u64 temp, temp_limit; - const struct fuse_corner *fuse, *prev_fuse; - - fuse = corner->fuse_corner; - prev_fuse = fuse - 1; - - f_high = fuse->max_freq; - f_low = prev_fuse->max_freq; - uV_high = fuse->uV; - uV_low = prev_fuse->uV; - f_diff = fuse->max_freq - corner->freq; - - /* - * Don't interpolate in the wrong direction. This could happen - * if the adjusted fuse voltage overlaps with the previous fuse's - * adjusted voltage. - */ - if (f_high <= f_low || uV_high <= uV_low || f_high <= corner->freq) - return corner->uV; - - temp = f_diff * (uV_high - uV_low); - temp = div64_ul(temp, f_high - f_low); - - /* - * max_volt_scale has units of uV/MHz while freq values - * have units of Hz. Divide by 1000000 to convert to. - */ - temp_limit = f_diff * fdata->max_volt_scale; - do_div(temp_limit, 1000000); - - uV = uV_high - min(temp, temp_limit); - return roundup(uV, step_volt); -} - -static unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp) -{ - struct device_node *np; - unsigned int fuse_corner = 0; - - np = dev_pm_opp_get_of_node(opp); - if (of_property_read_u32(np, "qcom,opp-fuse-level", &fuse_corner)) - pr_err("%s: missing 'qcom,opp-fuse-level' property\n", - __func__); - - of_node_put(np); - - return fuse_corner; -} - -static unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, - struct device *cpu_dev) -{ - u64 rate = 0; - struct device_node *ref_np; - struct device_node *desc_np; - struct device_node *child_np = NULL; - struct device_node *child_req_np = NULL; - - desc_np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); - if (!desc_np) - return 0; - - ref_np = dev_pm_opp_get_of_node(ref); - if (!ref_np) - goto out_ref; - - do { - of_node_put(child_req_np); - child_np = of_get_next_available_child(desc_np, child_np); - child_req_np = of_parse_phandle(child_np, "required-opps", 0); - } while (child_np && child_req_np != ref_np); - - if (child_np && child_req_np == ref_np) - of_property_read_u64(child_np, "opp-hz", &rate); - - of_node_put(child_req_np); - of_node_put(child_np); - of_node_put(ref_np); -out_ref: - of_node_put(desc_np); - - return (unsigned long) rate; -} - static int cpr_corner_init(struct cpr_drv *drv) { const struct cpr_desc *desc = drv->desc; @@ -1110,7 +852,7 @@ static int cpr_corner_init(struct cpr_drv *drv) opp = dev_pm_opp_find_level_exact(&drv->pd.dev, level); if (IS_ERR(opp)) return -EINVAL; - fc = cpr_get_fuse_corner(opp); + fc = cpr_get_fuse_corner(opp, 0); if (!fc) { dev_pm_opp_put(opp); return -EINVAL; @@ -1186,7 +928,7 @@ static int cpr_corner_init(struct cpr_drv *drv) corner->uV = fuse->uV; if (prev_fuse && cdata[i - 1].freq == prev_fuse->max_freq) { - scaling = cpr_calculate_scaling(quot_offset, drv, + scaling = cpr_calculate_scaling(drv->dev, quot_offset, fdata, corner); if (scaling < 0) return scaling; @@ -1224,47 +966,6 @@ static int cpr_corner_init(struct cpr_drv *drv) return 0; } -static const struct cpr_fuse *cpr_get_fuses(struct cpr_drv *drv) -{ - const struct cpr_desc *desc = drv->desc; - struct cpr_fuse *fuses; - int i; - - fuses = devm_kcalloc(drv->dev, desc->num_fuse_corners, - sizeof(struct cpr_fuse), - GFP_KERNEL); - if (!fuses) - return ERR_PTR(-ENOMEM); - - for (i = 0; i < desc->num_fuse_corners; i++) { - char tbuf[32]; - - snprintf(tbuf, 32, "cpr_ring_osc%d", i + 1); - fuses[i].ring_osc = devm_kstrdup(drv->dev, tbuf, GFP_KERNEL); - if (!fuses[i].ring_osc) - return ERR_PTR(-ENOMEM); - - snprintf(tbuf, 32, "cpr_init_voltage%d", i + 1); - fuses[i].init_voltage = devm_kstrdup(drv->dev, tbuf, - GFP_KERNEL); - if (!fuses[i].init_voltage) - return ERR_PTR(-ENOMEM); - - snprintf(tbuf, 32, "cpr_quotient%d", i + 1); - fuses[i].quotient = devm_kstrdup(drv->dev, tbuf, GFP_KERNEL); - if (!fuses[i].quotient) - return ERR_PTR(-ENOMEM); - - snprintf(tbuf, 32, "cpr_quotient_offset%d", i + 1); - fuses[i].quotient_offset = devm_kstrdup(drv->dev, tbuf, - GFP_KERNEL); - if (!fuses[i].quotient_offset) - return ERR_PTR(-ENOMEM); - } - - return fuses; -} - static void cpr_set_loop_allowed(struct cpr_drv *drv) { drv->loop_disabled = false; @@ -1296,54 +997,6 @@ static int cpr_init_parameters(struct cpr_drv *drv) return 0; } -static int cpr_find_initial_corner(struct cpr_drv *drv) -{ - unsigned long rate; - const struct corner *end; - struct corner *iter; - unsigned int i = 0; - - if (!drv->cpu_clk) { - dev_err(drv->dev, "cannot get rate from NULL clk\n"); - return -EINVAL; - } - - end = &drv->corners[drv->num_corners - 1]; - rate = clk_get_rate(drv->cpu_clk); - - /* - * Some bootloaders set a CPU clock frequency that is not defined - * in the OPP table. When running at an unlisted frequency, - * cpufreq_online() will change to the OPP which has the lowest - * frequency, at or above the unlisted frequency. - * Since cpufreq_online() always "rounds up" in the case of an - * unlisted frequency, this function always "rounds down" in case - * of an unlisted frequency. That way, when cpufreq_online() - * triggers the first ever call to cpr_set_performance_state(), - * it will correctly determine the direction as UP. - */ - for (iter = drv->corners; iter <= end; iter++) { - if (iter->freq > rate) - break; - i++; - if (iter->freq == rate) { - drv->corner = iter; - break; - } - if (iter->freq < rate) - drv->corner = iter; - } - - if (!drv->corner) { - dev_err(drv->dev, "boot up corner not found\n"); - return -EINVAL; - } - - dev_dbg(drv->dev, "boot up perf state: %u\n", i); - - return 0; -} - static const struct cpr_desc qcs404_cpr_desc = { .num_fuse_corners = 3, .min_diff_quot = CPR_FUSE_MIN_QUOT_DIFF, @@ -1531,7 +1184,8 @@ static int cpr_pd_attach_dev(struct generic_pm_domain *domain, if (ret) goto unlock; - ret = cpr_find_initial_corner(drv); + ret = cpr_find_initial_corner(drv->dev, drv->cpu_clk, drv->corners, + drv->num_corners); if (ret) goto unlock; @@ -1616,6 +1270,7 @@ static int cpr_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct cpr_drv *drv; + const struct cpr_desc *desc; int irq, ret; const struct cpr_acc_desc *data; struct device_node *np; @@ -1631,6 +1286,7 @@ static int cpr_probe(struct platform_device *pdev) drv->dev = dev; drv->desc = data->cpr_desc; drv->acc_desc = data->acc_desc; + desc = drv->desc; drv->fuse_corners = devm_kcalloc(dev, drv->desc->num_fuse_corners, sizeof(*drv->fuse_corners), @@ -1670,11 +1326,13 @@ static int cpr_probe(struct platform_device *pdev) if (ret) return ret; - drv->cpr_fuses = cpr_get_fuses(drv); + drv->cpr_fuses = cpr_get_fuses(drv->dev, UINT_MAX, desc->num_fuse_corners); if (IS_ERR(drv->cpr_fuses)) return PTR_ERR(drv->cpr_fuses); - ret = cpr_populate_ring_osc_idx(drv); + ret = cpr_populate_ring_osc_idx(drv->dev, drv->fuse_corners, + drv->cpr_fuses, + desc->num_fuse_corners); if (ret) return ret;