diff mbox series

[v3,1/3] can: esd_usb: Move mislocated storage of SJA1000_ECC_SEG bits in case of a bus error

Message ID 20230216190450.3901254-2-frank.jungclaus@esd.eu
State New
Headers
Series can: esd_usb: Some more preparation for supporting esd CAN-USB/3 |

Commit Message

Frank Jungclaus Feb. 16, 2023, 7:04 p.m. UTC 
  Move the supply for cf->data[3] (bit stream position of CAN error), in
case of a bus- or protocol-error, outside of the "switch (ecc &
SJA1000_ECC_MASK){}"-statement, because this bit stream position is
independent of the error type.

Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
---
 drivers/net/can/usb/esd_usb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c
index 42323f5e6f3a..5e182fadd875 100644
--- a/drivers/net/can/usb/esd_usb.c
+++ b/drivers/net/can/usb/esd_usb.c
@@ -286,7 +286,6 @@  static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
 				cf->data[2] |= CAN_ERR_PROT_STUFF;
 				break;
 			default:
-				cf->data[3] = ecc & SJA1000_ECC_SEG;
 				break;
 			}
 
@@ -294,6 +293,9 @@  static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
 			if (!(ecc & SJA1000_ECC_DIR))
 				cf->data[2] |= CAN_ERR_PROT_TX;
 
+			/* Bit stream position in CAN frame as the error was detected */
+			cf->data[3] = ecc & SJA1000_ECC_SEG;
+
 			if (priv->can.state == CAN_STATE_ERROR_WARNING ||
 			    priv->can.state == CAN_STATE_ERROR_PASSIVE) {
 				cf->data[1] = (txerr > rxerr) ?