diff mbox series

[V2,04/21] RISC-V: Add support to build the ACPI core

Message ID 20230216182043.1946553-5-sunilvl@ventanamicro.com
State New
Headers
Series Add basic ACPI support for RISC-V |

Commit Message

Sunil V L Feb. 16, 2023, 6:20 p.m. UTC 
  Enable ACPI core for RISC-V after adding architecture-specific
interfaces and header files required to build the ACPI core.

1) Couple of header files are required unconditionally by the ACPI
core. Add empty acenv.h and cpu.h header files.

2) If CONFIG_PCI is enabled, a few PCI related interfaces need to
be provided by the architecture. Define dummy interfaces for now
so that build succeeds. Actual implementation will be added when
PCI support is added for ACPI along with external interrupt
controller support.

3) A few globals and memory mapping related functions specific
to the architecture need to be provided.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 arch/riscv/Kconfig             |  5 +++
 arch/riscv/include/asm/acenv.h | 11 +++++
 arch/riscv/include/asm/acpi.h  | 60 +++++++++++++++++++++++++
 arch/riscv/include/asm/cpu.h   |  8 ++++
 arch/riscv/kernel/Makefile     |  2 +
 arch/riscv/kernel/acpi.c       | 80 ++++++++++++++++++++++++++++++++++
 6 files changed, 166 insertions(+)
 create mode 100644 arch/riscv/include/asm/acenv.h
 create mode 100644 arch/riscv/include/asm/acpi.h
 create mode 100644 arch/riscv/include/asm/cpu.h
 create mode 100644 arch/riscv/kernel/acpi.c

Comments

Andrew Jones Feb. 20, 2023, 3:44 p.m. UTC | #1 
On Thu, Feb 16, 2023 at 11:50:26PM +0530, Sunil V L wrote:
> Enable ACPI core for RISC-V after adding architecture-specific
> interfaces and header files required to build the ACPI core.
> 
> 1) Couple of header files are required unconditionally by the ACPI
> core. Add empty acenv.h and cpu.h header files.
> 
> 2) If CONFIG_PCI is enabled, a few PCI related interfaces need to
> be provided by the architecture. Define dummy interfaces for now
> so that build succeeds. Actual implementation will be added when
> PCI support is added for ACPI along with external interrupt
> controller support.
> 
> 3) A few globals and memory mapping related functions specific
> to the architecture need to be provided.
> 
> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
>  arch/riscv/Kconfig             |  5 +++
>  arch/riscv/include/asm/acenv.h | 11 +++++
>  arch/riscv/include/asm/acpi.h  | 60 +++++++++++++++++++++++++
>  arch/riscv/include/asm/cpu.h   |  8 ++++
>  arch/riscv/kernel/Makefile     |  2 +
>  arch/riscv/kernel/acpi.c       | 80 ++++++++++++++++++++++++++++++++++
>  6 files changed, 166 insertions(+)
>  create mode 100644 arch/riscv/include/asm/acenv.h
>  create mode 100644 arch/riscv/include/asm/acpi.h
>  create mode 100644 arch/riscv/include/asm/cpu.h
>  create mode 100644 arch/riscv/kernel/acpi.c
> 
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index d153e1cd890b..3ba701b26389 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -12,6 +12,8 @@ config 32BIT
>  
>  config RISCV
>  	def_bool y
> +	select ACPI_GENERIC_GSI if ACPI

Is it better for this to come after patch 14, "irqchip/riscv-intc:
Add ACPI support"?

> +	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
>  	select ARCH_CLOCKSOURCE_INIT
>  	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
>  	select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
> @@ -598,6 +600,7 @@ config EFI_STUB
>  config EFI
>  	bool "UEFI runtime support"
>  	depends on OF && !XIP_KERNEL
> +	select ARCH_SUPPORTS_ACPI if 64BIT
>  	select LIBFDT
>  	select UCS2_STRING
>  	select EFI_PARAMS_FROM_FDT
> @@ -703,3 +706,5 @@ source "drivers/cpufreq/Kconfig"
>  endmenu # "CPU Power Management"
>  
>  source "arch/riscv/kvm/Kconfig"
> +
> +source "drivers/acpi/Kconfig"
> diff --git a/arch/riscv/include/asm/acenv.h b/arch/riscv/include/asm/acenv.h
> new file mode 100644
> index 000000000000..22123c5a4883
> --- /dev/null
> +++ b/arch/riscv/include/asm/acenv.h
> @@ -0,0 +1,11 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * RISC-V specific ACPICA environments and implementation
> + */
> +
> +#ifndef _ASM_ACENV_H
> +#define _ASM_ACENV_H
> +
> +/* It is required unconditionally by ACPI core */
> +
> +#endif /* _ASM_ACENV_H */
> diff --git a/arch/riscv/include/asm/acpi.h b/arch/riscv/include/asm/acpi.h
> new file mode 100644
> index 000000000000..7f9dce3c39d0
> --- /dev/null
> +++ b/arch/riscv/include/asm/acpi.h
> @@ -0,0 +1,60 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + *  Copyright (C) 2013-2014, Linaro Ltd.
> + *	Author: Al Stone <al.stone@linaro.org>
> + *	Author: Graeme Gregory <graeme.gregory@linaro.org>
> + *	Author: Hanjun Guo <hanjun.guo@linaro.org>
> + *
> + *  Copyright (C) 2021-2023, Ventana Micro Systems Inc.
> + *	Author: Sunil V L <sunilvl@ventanamicro.com>
> + */
> +
> +#ifndef _ASM_ACPI_H
> +#define _ASM_ACPI_H
> +
> +/* Basic configuration for ACPI */
> +#ifdef CONFIG_ACPI
> +
> +/* ACPI table mapping after acpi_permanent_mmap is set */
> +void *acpi_os_ioremap(acpi_physical_address phys, acpi_size size);
> +#define acpi_os_ioremap acpi_os_ioremap
> +
> +#define acpi_strict 1   /* No out-of-spec workarounds on RISC-V */
> +extern int acpi_disabled;
> +extern int acpi_noirq;
> +extern int acpi_pci_disabled;

need blank line here

> +static inline void disable_acpi(void)
> +{
> +	acpi_disabled = 1;
> +	acpi_pci_disabled = 1;
> +	acpi_noirq = 1;
> +}
> +
> +static inline void enable_acpi(void)
> +{
> +	acpi_disabled = 0;
> +	acpi_pci_disabled = 0;
> +	acpi_noirq = 0;
> +}
> +
> +/*
> + * The ACPI processor driver for ACPI core code needs this macro
> + * to find out this cpu was already mapped (mapping from CPU hardware
> + * ID to CPU logical ID) or not.
> + */
> +#define cpu_physical_id(cpu) cpuid_to_hartid_map(cpu)
> +
> +/*
> + * Since MADT must provide at least one RINTC structure, the
> + * CPU will be always available in MADT on RISC-V.
> + */
> +static inline bool acpi_has_cpu_in_madt(void)
> +{
> +	return true;
> +}
> +
> +static inline void arch_fix_phys_package_id(int num, u32 slot) { }
> +
> +#endif /* CONFIG_ACPI */
> +
> +#endif /*_ASM_ACPI_H*/
> diff --git a/arch/riscv/include/asm/cpu.h b/arch/riscv/include/asm/cpu.h
> new file mode 100644
> index 000000000000..ea1a88b3d5f2
> --- /dev/null
> +++ b/arch/riscv/include/asm/cpu.h
> @@ -0,0 +1,8 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +
> +#ifndef _ASM_CPU_H
> +#define _ASM_CPU_H
> +
> +/* It is required unconditionally by ACPI core */
> +
> +#endif /* _ASM_CPU_H */
> diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
> index 67f542be1bea..f979dc8cf47d 100644
> --- a/arch/riscv/kernel/Makefile
> +++ b/arch/riscv/kernel/Makefile
> @@ -90,3 +90,5 @@ obj-$(CONFIG_EFI)		+= efi.o
>  obj-$(CONFIG_COMPAT)		+= compat_syscall_table.o
>  obj-$(CONFIG_COMPAT)		+= compat_signal.o
>  obj-$(CONFIG_COMPAT)		+= compat_vdso/
> +
> +obj-$(CONFIG_ACPI)              += acpi.o
> diff --git a/arch/riscv/kernel/acpi.c b/arch/riscv/kernel/acpi.c
> new file mode 100644
> index 000000000000..81d448c41714
> --- /dev/null
> +++ b/arch/riscv/kernel/acpi.c
> @@ -0,0 +1,80 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + *  RISC-V Specific Low-Level ACPI Boot Support
> + *
> + *  Copyright (C) 2013-2014, Linaro Ltd.
> + *	Author: Al Stone <al.stone@linaro.org>
> + *	Author: Graeme Gregory <graeme.gregory@linaro.org>
> + *	Author: Hanjun Guo <hanjun.guo@linaro.org>
> + *	Author: Tomasz Nowicki <tomasz.nowicki@linaro.org>
> + *	Author: Naresh Bhat <naresh.bhat@linaro.org>
> + *
> + *  Copyright (C) 2021-2023, Ventana Micro Systems Inc.
> + *	Author: Sunil V L <sunilvl@ventanamicro.com>
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/io.h>
> +#include <linux/pci.h>
> +
> +int acpi_noirq = 1;		/* skip ACPI IRQ initialization */
> +int acpi_disabled = 1;
> +EXPORT_SYMBOL(acpi_disabled);
> +
> +int acpi_pci_disabled = 1;	/* skip ACPI PCI scan and IRQ initialization */
> +EXPORT_SYMBOL(acpi_pci_disabled);
> +
> +/*
> + * __acpi_map_table() will be called before paging_init(), so early_ioremap()
> + * or early_memremap() should be called here to for ACPI table mapping.
> + */
> +void __init __iomem *__acpi_map_table(unsigned long phys, unsigned long size)
> +{
> +	if (!size)
> +		return NULL;
> +
> +	return early_memremap(phys, size);
> +}
> +
> +void __init __acpi_unmap_table(void __iomem *map, unsigned long size)
> +{
> +	if (!map || !size)
> +		return;
> +
> +	early_memunmap(map, size);
> +}
> +
> +void *acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
> +{
> +	return memremap(phys, size, MEMREMAP_WB);
> +}
> +
> +#ifdef CONFIG_PCI
> +
> +/*
> + * These interfaces are defined just to enable building ACPI core.
> + * TODO: Update it with actual implementation when external interrupt
> + * controller support is added in RISC-V ACPI.
> + */
> +int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
> +		 int reg, int len, u32 *val)
> +{
> +	return PCIBIOS_DEVICE_NOT_FOUND;
> +}
> +
> +int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
> +		  int reg, int len, u32 val)
> +{
> +	return PCIBIOS_DEVICE_NOT_FOUND;
> +}
> +
> +int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
> +{
> +	return -1;
> +}
> +
> +struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
> +{
> +	return NULL;
> +}
> +#endif	/* CONFIG_PCI */
> -- 
> 2.34.1
>

Otherwise, afaict, this is pretty consistent with how arm64 started its
ACPI support.

Reviewed-by: Andrew Jones <ajones@ventanamicro.com>

Thanks,
drew
Sunil V L Feb. 24, 2023, 9 a.m. UTC | #2 
On Mon, Feb 20, 2023 at 04:44:15PM +0100, Andrew Jones wrote:
> On Thu, Feb 16, 2023 at 11:50:26PM +0530, Sunil V L wrote:
> > Enable ACPI core for RISC-V after adding architecture-specific
> > interfaces and header files required to build the ACPI core.
> > 
> > 1) Couple of header files are required unconditionally by the ACPI
> > core. Add empty acenv.h and cpu.h header files.
> > 
> > 2) If CONFIG_PCI is enabled, a few PCI related interfaces need to
> > be provided by the architecture. Define dummy interfaces for now
> > so that build succeeds. Actual implementation will be added when
> > PCI support is added for ACPI along with external interrupt
> > controller support.
> > 
> > 3) A few globals and memory mapping related functions specific
> > to the architecture need to be provided.
> > 
> > Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
> > Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > ---
> >  arch/riscv/Kconfig             |  5 +++
> >  arch/riscv/include/asm/acenv.h | 11 +++++
> >  arch/riscv/include/asm/acpi.h  | 60 +++++++++++++++++++++++++
> >  arch/riscv/include/asm/cpu.h   |  8 ++++
> >  arch/riscv/kernel/Makefile     |  2 +
> >  arch/riscv/kernel/acpi.c       | 80 ++++++++++++++++++++++++++++++++++
> >  6 files changed, 166 insertions(+)
> >  create mode 100644 arch/riscv/include/asm/acenv.h
> >  create mode 100644 arch/riscv/include/asm/acpi.h
> >  create mode 100644 arch/riscv/include/asm/cpu.h
> >  create mode 100644 arch/riscv/kernel/acpi.c
> > 
> > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > index d153e1cd890b..3ba701b26389 100644
> > --- a/arch/riscv/Kconfig
> > +++ b/arch/riscv/Kconfig
> > @@ -12,6 +12,8 @@ config 32BIT
> >  
> >  config RISCV
> >  	def_bool y
> > +	select ACPI_GENERIC_GSI if ACPI
> 
> Is it better for this to come after patch 14, "irqchip/riscv-intc:
> Add ACPI support"?
> 
This is required to just to enable building the ACPI core for RISC-V.

> > +	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
> >  	select ARCH_CLOCKSOURCE_INIT
> >  	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
> >  	select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
> > @@ -598,6 +600,7 @@ config EFI_STUB
> >  config EFI
> >  	bool "UEFI runtime support"
> >  	depends on OF && !XIP_KERNEL
> > +	select ARCH_SUPPORTS_ACPI if 64BIT
> >  	select LIBFDT
> >  	select UCS2_STRING
> >  	select EFI_PARAMS_FROM_FDT
> > @@ -703,3 +706,5 @@ source "drivers/cpufreq/Kconfig"
> >  endmenu # "CPU Power Management"
> >  
> >  source "arch/riscv/kvm/Kconfig"
> > +
> > +source "drivers/acpi/Kconfig"
> > diff --git a/arch/riscv/include/asm/acenv.h b/arch/riscv/include/asm/acenv.h
> > new file mode 100644
> > index 000000000000..22123c5a4883
> > --- /dev/null
> > +++ b/arch/riscv/include/asm/acenv.h
> > @@ -0,0 +1,11 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * RISC-V specific ACPICA environments and implementation
> > + */
> > +
> > +#ifndef _ASM_ACENV_H
> > +#define _ASM_ACENV_H
> > +
> > +/* It is required unconditionally by ACPI core */
> > +
> > +#endif /* _ASM_ACENV_H */
> > diff --git a/arch/riscv/include/asm/acpi.h b/arch/riscv/include/asm/acpi.h
> > new file mode 100644
> > index 000000000000..7f9dce3c39d0
> > --- /dev/null
> > +++ b/arch/riscv/include/asm/acpi.h
> > @@ -0,0 +1,60 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + *  Copyright (C) 2013-2014, Linaro Ltd.
> > + *	Author: Al Stone <al.stone@linaro.org>
> > + *	Author: Graeme Gregory <graeme.gregory@linaro.org>
> > + *	Author: Hanjun Guo <hanjun.guo@linaro.org>
> > + *
> > + *  Copyright (C) 2021-2023, Ventana Micro Systems Inc.
> > + *	Author: Sunil V L <sunilvl@ventanamicro.com>
> > + */
> > +
> > +#ifndef _ASM_ACPI_H
> > +#define _ASM_ACPI_H
> > +
> > +/* Basic configuration for ACPI */
> > +#ifdef CONFIG_ACPI
> > +
> > +/* ACPI table mapping after acpi_permanent_mmap is set */
> > +void *acpi_os_ioremap(acpi_physical_address phys, acpi_size size);
> > +#define acpi_os_ioremap acpi_os_ioremap
> > +
> > +#define acpi_strict 1   /* No out-of-spec workarounds on RISC-V */
> > +extern int acpi_disabled;
> > +extern int acpi_noirq;
> > +extern int acpi_pci_disabled;
> 
> need blank line here
> 
Okay.

> > +static inline void disable_acpi(void)
> > +{
> > +	acpi_disabled = 1;
> > +	acpi_pci_disabled = 1;
> > +	acpi_noirq = 1;
> > +}
> > +
> > +static inline void enable_acpi(void)
> > +{
> > +	acpi_disabled = 0;
> > +	acpi_pci_disabled = 0;
> > +	acpi_noirq = 0;
> > +}
> > +
> > +/*
> > + * The ACPI processor driver for ACPI core code needs this macro
> > + * to find out this cpu was already mapped (mapping from CPU hardware
> > + * ID to CPU logical ID) or not.
> > + */
> > +#define cpu_physical_id(cpu) cpuid_to_hartid_map(cpu)
> > +
> > +/*
> > + * Since MADT must provide at least one RINTC structure, the
> > + * CPU will be always available in MADT on RISC-V.
> > + */
> > +static inline bool acpi_has_cpu_in_madt(void)
> > +{
> > +	return true;
> > +}
> > +
> > +static inline void arch_fix_phys_package_id(int num, u32 slot) { }
> > +
> > +#endif /* CONFIG_ACPI */
> > +
> > +#endif /*_ASM_ACPI_H*/
> > diff --git a/arch/riscv/include/asm/cpu.h b/arch/riscv/include/asm/cpu.h
> > new file mode 100644
> > index 000000000000..ea1a88b3d5f2
> > --- /dev/null
> > +++ b/arch/riscv/include/asm/cpu.h
> > @@ -0,0 +1,8 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +
> > +#ifndef _ASM_CPU_H
> > +#define _ASM_CPU_H
> > +
> > +/* It is required unconditionally by ACPI core */
> > +
> > +#endif /* _ASM_CPU_H */
> > diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
> > index 67f542be1bea..f979dc8cf47d 100644
> > --- a/arch/riscv/kernel/Makefile
> > +++ b/arch/riscv/kernel/Makefile
> > @@ -90,3 +90,5 @@ obj-$(CONFIG_EFI)		+= efi.o
> >  obj-$(CONFIG_COMPAT)		+= compat_syscall_table.o
> >  obj-$(CONFIG_COMPAT)		+= compat_signal.o
> >  obj-$(CONFIG_COMPAT)		+= compat_vdso/
> > +
> > +obj-$(CONFIG_ACPI)              += acpi.o
> > diff --git a/arch/riscv/kernel/acpi.c b/arch/riscv/kernel/acpi.c
> > new file mode 100644
> > index 000000000000..81d448c41714
> > --- /dev/null
> > +++ b/arch/riscv/kernel/acpi.c
> > @@ -0,0 +1,80 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + *  RISC-V Specific Low-Level ACPI Boot Support
> > + *
> > + *  Copyright (C) 2013-2014, Linaro Ltd.
> > + *	Author: Al Stone <al.stone@linaro.org>
> > + *	Author: Graeme Gregory <graeme.gregory@linaro.org>
> > + *	Author: Hanjun Guo <hanjun.guo@linaro.org>
> > + *	Author: Tomasz Nowicki <tomasz.nowicki@linaro.org>
> > + *	Author: Naresh Bhat <naresh.bhat@linaro.org>
> > + *
> > + *  Copyright (C) 2021-2023, Ventana Micro Systems Inc.
> > + *	Author: Sunil V L <sunilvl@ventanamicro.com>
> > + */
> > +
> > +#include <linux/acpi.h>
> > +#include <linux/io.h>
> > +#include <linux/pci.h>
> > +
> > +int acpi_noirq = 1;		/* skip ACPI IRQ initialization */
> > +int acpi_disabled = 1;
> > +EXPORT_SYMBOL(acpi_disabled);
> > +
> > +int acpi_pci_disabled = 1;	/* skip ACPI PCI scan and IRQ initialization */
> > +EXPORT_SYMBOL(acpi_pci_disabled);
> > +
> > +/*
> > + * __acpi_map_table() will be called before paging_init(), so early_ioremap()
> > + * or early_memremap() should be called here to for ACPI table mapping.
> > + */
> > +void __init __iomem *__acpi_map_table(unsigned long phys, unsigned long size)
> > +{
> > +	if (!size)
> > +		return NULL;
> > +
> > +	return early_memremap(phys, size);
> > +}
> > +
> > +void __init __acpi_unmap_table(void __iomem *map, unsigned long size)
> > +{
> > +	if (!map || !size)
> > +		return;
> > +
> > +	early_memunmap(map, size);
> > +}
> > +
> > +void *acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
> > +{
> > +	return memremap(phys, size, MEMREMAP_WB);
> > +}
> > +
> > +#ifdef CONFIG_PCI
> > +
> > +/*
> > + * These interfaces are defined just to enable building ACPI core.
> > + * TODO: Update it with actual implementation when external interrupt
> > + * controller support is added in RISC-V ACPI.
> > + */
> > +int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
> > +		 int reg, int len, u32 *val)
> > +{
> > +	return PCIBIOS_DEVICE_NOT_FOUND;
> > +}
> > +
> > +int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
> > +		  int reg, int len, u32 val)
> > +{
> > +	return PCIBIOS_DEVICE_NOT_FOUND;
> > +}
> > +
> > +int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
> > +{
> > +	return -1;
> > +}
> > +
> > +struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
> > +{
> > +	return NULL;
> > +}
> > +#endif	/* CONFIG_PCI */
> > -- 
> > 2.34.1
> >
> 
> Otherwise, afaict, this is pretty consistent with how arm64 started its
> ACPI support.
> 
> Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
> 
Thanks!
Sunil
diff mbox series

Patch

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index d153e1cd890b..3ba701b26389 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -12,6 +12,8 @@  config 32BIT
 
 config RISCV
 	def_bool y
+	select ACPI_GENERIC_GSI if ACPI
+	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
 	select ARCH_CLOCKSOURCE_INIT
 	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
 	select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
@@ -598,6 +600,7 @@  config EFI_STUB
 config EFI
 	bool "UEFI runtime support"
 	depends on OF && !XIP_KERNEL
+	select ARCH_SUPPORTS_ACPI if 64BIT
 	select LIBFDT
 	select UCS2_STRING
 	select EFI_PARAMS_FROM_FDT
@@ -703,3 +706,5 @@  source "drivers/cpufreq/Kconfig"
 endmenu # "CPU Power Management"
 
 source "arch/riscv/kvm/Kconfig"
+
+source "drivers/acpi/Kconfig"
diff --git a/arch/riscv/include/asm/acenv.h b/arch/riscv/include/asm/acenv.h
new file mode 100644
index 000000000000..22123c5a4883
--- /dev/null
+++ b/arch/riscv/include/asm/acenv.h
@@ -0,0 +1,11 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * RISC-V specific ACPICA environments and implementation
+ */
+
+#ifndef _ASM_ACENV_H
+#define _ASM_ACENV_H
+
+/* It is required unconditionally by ACPI core */
+
+#endif /* _ASM_ACENV_H */
diff --git a/arch/riscv/include/asm/acpi.h b/arch/riscv/include/asm/acpi.h
new file mode 100644
index 000000000000..7f9dce3c39d0
--- /dev/null
+++ b/arch/riscv/include/asm/acpi.h
@@ -0,0 +1,60 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  Copyright (C) 2013-2014, Linaro Ltd.
+ *	Author: Al Stone <al.stone@linaro.org>
+ *	Author: Graeme Gregory <graeme.gregory@linaro.org>
+ *	Author: Hanjun Guo <hanjun.guo@linaro.org>
+ *
+ *  Copyright (C) 2021-2023, Ventana Micro Systems Inc.
+ *	Author: Sunil V L <sunilvl@ventanamicro.com>
+ */
+
+#ifndef _ASM_ACPI_H
+#define _ASM_ACPI_H
+
+/* Basic configuration for ACPI */
+#ifdef CONFIG_ACPI
+
+/* ACPI table mapping after acpi_permanent_mmap is set */
+void *acpi_os_ioremap(acpi_physical_address phys, acpi_size size);
+#define acpi_os_ioremap acpi_os_ioremap
+
+#define acpi_strict 1   /* No out-of-spec workarounds on RISC-V */
+extern int acpi_disabled;
+extern int acpi_noirq;
+extern int acpi_pci_disabled;
+static inline void disable_acpi(void)
+{
+	acpi_disabled = 1;
+	acpi_pci_disabled = 1;
+	acpi_noirq = 1;
+}
+
+static inline void enable_acpi(void)
+{
+	acpi_disabled = 0;
+	acpi_pci_disabled = 0;
+	acpi_noirq = 0;
+}
+
+/*
+ * The ACPI processor driver for ACPI core code needs this macro
+ * to find out this cpu was already mapped (mapping from CPU hardware
+ * ID to CPU logical ID) or not.
+ */
+#define cpu_physical_id(cpu) cpuid_to_hartid_map(cpu)
+
+/*
+ * Since MADT must provide at least one RINTC structure, the
+ * CPU will be always available in MADT on RISC-V.
+ */
+static inline bool acpi_has_cpu_in_madt(void)
+{
+	return true;
+}
+
+static inline void arch_fix_phys_package_id(int num, u32 slot) { }
+
+#endif /* CONFIG_ACPI */
+
+#endif /*_ASM_ACPI_H*/
diff --git a/arch/riscv/include/asm/cpu.h b/arch/riscv/include/asm/cpu.h
new file mode 100644
index 000000000000..ea1a88b3d5f2
--- /dev/null
+++ b/arch/riscv/include/asm/cpu.h
@@ -0,0 +1,8 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ASM_CPU_H
+#define _ASM_CPU_H
+
+/* It is required unconditionally by ACPI core */
+
+#endif /* _ASM_CPU_H */
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index 67f542be1bea..f979dc8cf47d 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -90,3 +90,5 @@  obj-$(CONFIG_EFI)		+= efi.o
 obj-$(CONFIG_COMPAT)		+= compat_syscall_table.o
 obj-$(CONFIG_COMPAT)		+= compat_signal.o
 obj-$(CONFIG_COMPAT)		+= compat_vdso/
+
+obj-$(CONFIG_ACPI)              += acpi.o
diff --git a/arch/riscv/kernel/acpi.c b/arch/riscv/kernel/acpi.c
new file mode 100644
index 000000000000..81d448c41714
--- /dev/null
+++ b/arch/riscv/kernel/acpi.c
@@ -0,0 +1,80 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  RISC-V Specific Low-Level ACPI Boot Support
+ *
+ *  Copyright (C) 2013-2014, Linaro Ltd.
+ *	Author: Al Stone <al.stone@linaro.org>
+ *	Author: Graeme Gregory <graeme.gregory@linaro.org>
+ *	Author: Hanjun Guo <hanjun.guo@linaro.org>
+ *	Author: Tomasz Nowicki <tomasz.nowicki@linaro.org>
+ *	Author: Naresh Bhat <naresh.bhat@linaro.org>
+ *
+ *  Copyright (C) 2021-2023, Ventana Micro Systems Inc.
+ *	Author: Sunil V L <sunilvl@ventanamicro.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/pci.h>
+
+int acpi_noirq = 1;		/* skip ACPI IRQ initialization */
+int acpi_disabled = 1;
+EXPORT_SYMBOL(acpi_disabled);
+
+int acpi_pci_disabled = 1;	/* skip ACPI PCI scan and IRQ initialization */
+EXPORT_SYMBOL(acpi_pci_disabled);
+
+/*
+ * __acpi_map_table() will be called before paging_init(), so early_ioremap()
+ * or early_memremap() should be called here to for ACPI table mapping.
+ */
+void __init __iomem *__acpi_map_table(unsigned long phys, unsigned long size)
+{
+	if (!size)
+		return NULL;
+
+	return early_memremap(phys, size);
+}
+
+void __init __acpi_unmap_table(void __iomem *map, unsigned long size)
+{
+	if (!map || !size)
+		return;
+
+	early_memunmap(map, size);
+}
+
+void *acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
+{
+	return memremap(phys, size, MEMREMAP_WB);
+}
+
+#ifdef CONFIG_PCI
+
+/*
+ * These interfaces are defined just to enable building ACPI core.
+ * TODO: Update it with actual implementation when external interrupt
+ * controller support is added in RISC-V ACPI.
+ */
+int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
+		 int reg, int len, u32 *val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
+		  int reg, int len, u32 val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
+{
+	return -1;
+}
+
+struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
+{
+	return NULL;
+}
+#endif	/* CONFIG_PCI */