diff mbox series

[v2] cpufreq: qcom-hw: Simplify counting frequency domains

Message ID 20230216105140.3938749-1-konrad.dybcio@linaro.org
State New
Headers
Series [v2] cpufreq: qcom-hw: Simplify counting frequency domains |

Commit Message

Konrad Dybcio Feb. 16, 2023, 10:51 a.m. UTC 
  For quite some time, this driver has been performing some quite
low-level DT operations. Simplify that using platform_get_resource.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
- remove stray newline near probe return
- s/doing performing/performing/

v1: https://lore.kernel.org/linux-arm-msm/20230216102956.3933639-1-konrad.dybcio@linaro.org/T/#u

 drivers/cpufreq/qcom-cpufreq-hw.c | 29 ++++++-----------------------
 1 file changed, 6 insertions(+), 23 deletions(-)

Comments

Bjorn Andersson Feb. 23, 2023, 3:27 a.m. UTC | #1 
On Thu, Feb 16, 2023 at 11:51:40AM +0100, Konrad Dybcio wrote:
> For quite some time, this driver has been performing some quite
> low-level DT operations. Simplify that using platform_get_resource.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Reviewed-by: Bjorn Andersson <andersson@kernel.org>

Regards,
Bjorn

> ---
> v1 -> v2:
> - remove stray newline near probe return
> - s/doing performing/performing/
> 
> v1: https://lore.kernel.org/linux-arm-msm/20230216102956.3933639-1-konrad.dybcio@linaro.org/T/#u
> 
>  drivers/cpufreq/qcom-cpufreq-hw.c | 29 ++++++-----------------------
>  1 file changed, 6 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
> index 2f581d2d617d..575a4461c25a 100644
> --- a/drivers/cpufreq/qcom-cpufreq-hw.c
> +++ b/drivers/cpufreq/qcom-cpufreq-hw.c
> @@ -29,6 +29,8 @@
>  
>  #define GT_IRQ_STATUS			BIT(2)
>  
> +#define MAX_FREQ_DOMAINS		3
> +
>  struct qcom_cpufreq_soc_data {
>  	u32 reg_enable;
>  	u32 reg_domain_state;
> @@ -651,10 +653,9 @@ static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
>  {
>  	struct clk_hw_onecell_data *clk_data;
>  	struct device *dev = &pdev->dev;
> -	struct device_node *soc_node;
>  	struct device *cpu_dev;
>  	struct clk *clk;
> -	int ret, i, num_domains, reg_sz;
> +	int ret, i, num_domains;
>  
>  	clk = clk_get(dev, "xo");
>  	if (IS_ERR(clk))
> @@ -681,24 +682,9 @@ static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> -	/* Allocate qcom_cpufreq_data based on the available frequency domains in DT */
> -	soc_node = of_get_parent(dev->of_node);
> -	if (!soc_node)
> -		return -EINVAL;
> -
> -	ret = of_property_read_u32(soc_node, "#address-cells", &reg_sz);
> -	if (ret)
> -		goto of_exit;
> -
> -	ret = of_property_read_u32(soc_node, "#size-cells", &i);
> -	if (ret)
> -		goto of_exit;
> -
> -	reg_sz += i;
> -
> -	num_domains = of_property_count_elems_of_size(dev->of_node, "reg", sizeof(u32) * reg_sz);
> -	if (num_domains <= 0)
> -		return num_domains;
> +	for (num_domains = 0; num_domains < MAX_FREQ_DOMAINS; num_domains++)
> +		if (!platform_get_resource(pdev, IORESOURCE_MEM, num_domains))
> +			break;
>  
>  	qcom_cpufreq.data = devm_kzalloc(dev, sizeof(struct qcom_cpufreq_data) * num_domains,
>  					 GFP_KERNEL);
> @@ -762,9 +748,6 @@ static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
>  	else
>  		dev_dbg(dev, "QCOM CPUFreq HW driver initialized\n");
>  
> -of_exit:
> -	of_node_put(soc_node);
> -
>  	return ret;
>  }
>  
> -- 
> 2.39.1
>
Viresh Kumar Feb. 23, 2023, 4:21 a.m. UTC | #2 
On 22-02-23, 19:27, Bjorn Andersson wrote:
> On Thu, Feb 16, 2023 at 11:51:40AM +0100, Konrad Dybcio wrote:
> > For quite some time, this driver has been performing some quite
> > low-level DT operations. Simplify that using platform_get_resource.
> > 
> > Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> 
> Reviewed-by: Bjorn Andersson <andersson@kernel.org>

Applied. Thanks.
diff mbox series

Patch

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index 2f581d2d617d..575a4461c25a 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -29,6 +29,8 @@ 
 
 #define GT_IRQ_STATUS			BIT(2)
 
+#define MAX_FREQ_DOMAINS		3
+
 struct qcom_cpufreq_soc_data {
 	u32 reg_enable;
 	u32 reg_domain_state;
@@ -651,10 +653,9 @@  static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
 {
 	struct clk_hw_onecell_data *clk_data;
 	struct device *dev = &pdev->dev;
-	struct device_node *soc_node;
 	struct device *cpu_dev;
 	struct clk *clk;
-	int ret, i, num_domains, reg_sz;
+	int ret, i, num_domains;
 
 	clk = clk_get(dev, "xo");
 	if (IS_ERR(clk))
@@ -681,24 +682,9 @@  static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	/* Allocate qcom_cpufreq_data based on the available frequency domains in DT */
-	soc_node = of_get_parent(dev->of_node);
-	if (!soc_node)
-		return -EINVAL;
-
-	ret = of_property_read_u32(soc_node, "#address-cells", &reg_sz);
-	if (ret)
-		goto of_exit;
-
-	ret = of_property_read_u32(soc_node, "#size-cells", &i);
-	if (ret)
-		goto of_exit;
-
-	reg_sz += i;
-
-	num_domains = of_property_count_elems_of_size(dev->of_node, "reg", sizeof(u32) * reg_sz);
-	if (num_domains <= 0)
-		return num_domains;
+	for (num_domains = 0; num_domains < MAX_FREQ_DOMAINS; num_domains++)
+		if (!platform_get_resource(pdev, IORESOURCE_MEM, num_domains))
+			break;
 
 	qcom_cpufreq.data = devm_kzalloc(dev, sizeof(struct qcom_cpufreq_data) * num_domains,
 					 GFP_KERNEL);
@@ -762,9 +748,6 @@  static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
 	else
 		dev_dbg(dev, "QCOM CPUFreq HW driver initialized\n");
 
-of_exit:
-	of_node_put(soc_node);
-
 	return ret;
 }