diff mbox series

[RESEND,12/12] arm64: dts: qcom: sm6115: Supply clock from cpufreq node to CPUs

Message ID 20230215070400.5901-13-manivannan.sadhasivam@linaro.org
State New
Headers
Series arm64: dts: qcom: Supply clock from cpufreq node to CPUs |

Commit Message

Manivannan Sadhasivam Feb. 15, 2023, 7:04 a.m. UTC 
  Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.

So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Konrad Dybcio Feb. 16, 2023, 10:40 a.m. UTC | #1 
On 15.02.2023 08:04, Manivannan Sadhasivam wrote:
> Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
> to the CPU cores. But this relationship is not represented in DTS so far.
> 
> So let's make cpufreq node as the clock provider and CPU nodes as the
> consumers. The clock index for each CPU node is based on the frequency
> domain index.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm6115.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 4d6ec815b78b..f55b193139bf 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -39,6 +39,7 @@ CPU0: cpu@0 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo260";
>  			reg = <0x0 0x0>;
> +			clocks = <&cpufreq_hw 0>;
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <100>;
>  			enable-method = "psci";
> @@ -54,6 +55,7 @@ CPU1: cpu@1 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo260";
>  			reg = <0x0 0x1>;
> +			clocks = <&cpufreq_hw 0>;
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <100>;
>  			enable-method = "psci";
> @@ -65,6 +67,7 @@ CPU2: cpu@2 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo260";
>  			reg = <0x0 0x2>;
> +			clocks = <&cpufreq_hw 0>;
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <100>;
>  			enable-method = "psci";
> @@ -76,6 +79,7 @@ CPU3: cpu@3 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo260";
>  			reg = <0x0 0x3>;
> +			clocks = <&cpufreq_hw 0>;
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <100>;
>  			enable-method = "psci";
> @@ -87,6 +91,7 @@ CPU4: cpu@100 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo260";
>  			reg = <0x0 0x100>;
> +			clocks = <&cpufreq_hw 1>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1638>;
>  			dynamic-power-coefficient = <282>;
> @@ -102,6 +107,7 @@ CPU5: cpu@101 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo260";
>  			reg = <0x0 0x101>;
> +			clocks = <&cpufreq_hw 1>;
>  			capacity-dmips-mhz = <1638>;
>  			dynamic-power-coefficient = <282>;
>  			enable-method = "psci";
> @@ -113,6 +119,7 @@ CPU6: cpu@102 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo260";
>  			reg = <0x0 0x102>;
> +			clocks = <&cpufreq_hw 1>;
>  			capacity-dmips-mhz = <1638>;
>  			dynamic-power-coefficient = <282>;
>  			enable-method = "psci";
> @@ -124,6 +131,7 @@ CPU7: cpu@103 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo260";
>  			reg = <0x0 0x103>;
> +			clocks = <&cpufreq_hw 1>;
>  			capacity-dmips-mhz = <1638>;
>  			dynamic-power-coefficient = <282>;
>  			enable-method = "psci";
> @@ -2123,6 +2131,7 @@ cpufreq_hw: cpufreq@f521000 {
>  			clock-names = "xo", "alternate";
>  
>  			#freq-domain-cells = <1>;
> +			#clock-cells = <1>;
>  		};
>  	};
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 4d6ec815b78b..f55b193139bf 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -39,6 +39,7 @@  CPU0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
@@ -54,6 +55,7 @@  CPU1: cpu@1 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x1>;
+			clocks = <&cpufreq_hw 0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
@@ -65,6 +67,7 @@  CPU2: cpu@2 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x2>;
+			clocks = <&cpufreq_hw 0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
@@ -76,6 +79,7 @@  CPU3: cpu@3 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x3>;
+			clocks = <&cpufreq_hw 0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
@@ -87,6 +91,7 @@  CPU4: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1638>;
 			dynamic-power-coefficient = <282>;
@@ -102,6 +107,7 @@  CPU5: cpu@101 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x101>;
+			clocks = <&cpufreq_hw 1>;
 			capacity-dmips-mhz = <1638>;
 			dynamic-power-coefficient = <282>;
 			enable-method = "psci";
@@ -113,6 +119,7 @@  CPU6: cpu@102 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x102>;
+			clocks = <&cpufreq_hw 1>;
 			capacity-dmips-mhz = <1638>;
 			dynamic-power-coefficient = <282>;
 			enable-method = "psci";
@@ -124,6 +131,7 @@  CPU7: cpu@103 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x103>;
+			clocks = <&cpufreq_hw 1>;
 			capacity-dmips-mhz = <1638>;
 			dynamic-power-coefficient = <282>;
 			enable-method = "psci";
@@ -2123,6 +2131,7 @@  cpufreq_hw: cpufreq@f521000 {
 			clock-names = "xo", "alternate";
 
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 	};