diff mbox series

[01/12] arm64: dts: qcom: sdm845: Supply clock from cpufreq node to CPUs

Message ID 20230215065520.5535-2-manivannan.sadhasivam@linaro.org
State New
Headers
Series arm64: dts: qcom: Supply clock from cpufreq node to CPUs |

Commit Message

Manivannan Sadhasivam Feb. 15, 2023, 6:55 a.m. UTC 
  Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.

So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 479859bd8ab3..1d5e6ade8ae7 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -92,6 +92,7 @@  CPU0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
 			dynamic-power-coefficient = <290>;
@@ -118,6 +119,7 @@  CPU1: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
 			dynamic-power-coefficient = <290>;
@@ -140,6 +142,7 @@  CPU2: cpu@200 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
 			dynamic-power-coefficient = <290>;
@@ -162,6 +165,7 @@  CPU3: cpu@300 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
 			dynamic-power-coefficient = <290>;
@@ -184,6 +188,7 @@  CPU4: cpu@400 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <442>;
@@ -206,6 +211,7 @@  CPU5: cpu@500 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <442>;
@@ -228,6 +234,7 @@  CPU6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <442>;
@@ -250,6 +257,7 @@  CPU7: cpu@700 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <442>;
@@ -5232,6 +5240,7 @@  cpufreq_hw: cpufreq@17d43000 {
 			clock-names = "xo", "alternate";
 
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 
 		wifi: wifi@18800000 {