[v2] dt-bindings: spi: spi-st-ssc: convert to DT schema
Commit Message
Convert spi-st-ssc.txt into st,ssc-spi.yaml for the
ST Microelectronics SSC SPI driver.
Signed-off-by: Alain Volmat <avolmat@me.com>
---
v2: correct subject & commit log
drop quotes around spi-controller.yaml
remove extra spaces within example
.../devicetree/bindings/spi/spi-st-ssc.txt | 40 ------------
.../devicetree/bindings/spi/st,ssc-spi.yaml | 61 +++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 62 insertions(+), 40 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/spi/spi-st-ssc.txt
create mode 100644 Documentation/devicetree/bindings/spi/st,ssc-spi.yaml
Comments
On 13/02/2023 20:23, Alain Volmat wrote:
> Convert spi-st-ssc.txt into st,ssc-spi.yaml for the
> ST Microelectronics SSC SPI driver.
>
> Signed-off-by: Alain Volmat <avolmat@me.com>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
On Mon, Feb 13, 2023 at 08:23:48PM +0100, Alain Volmat wrote:
> Convert spi-st-ssc.txt into st,ssc-spi.yaml for the
> ST Microelectronics SSC SPI driver.
Please submit patches using subject lines reflecting the style for the
subsystem, this makes it easier for people to identify relevant patches.
Look at what existing commits in the area you're changing are doing and
make sure your subject lines visually resemble what they're doing.
There's no need to resubmit to fix this alone.
On Mon, 13 Feb 2023 20:23:48 +0100, Alain Volmat wrote:
> Convert spi-st-ssc.txt into st,ssc-spi.yaml for the
> ST Microelectronics SSC SPI driver.
>
>
Applied to
broonie/spi.git for-next
Thanks!
[1/1] dt-bindings: spi: spi-st-ssc: convert to DT schema
commit: 7ec844a2c7535e4c4991e7e453baca85e156f7c1
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
deleted file mode 100644
@@ -1,40 +0,0 @@
-STMicroelectronics SSC (SPI) Controller
----------------------------------------
-
-Required properties:
-- compatible : "st,comms-ssc4-spi"
-- reg : Offset and length of the device's register set
-- interrupts : The interrupt specifier
-- clock-names : Must contain "ssc"
-- clocks : Must contain an entry for each name in clock-names
- See ../clk/*
-- pinctrl-names : Uses "default", can use "sleep" if provided
- See ../pinctrl/pinctrl-bindings.txt
-
-Optional properties:
-- cs-gpios : List of GPIO chip selects
- See ../spi/spi-bus.txt
-
-Child nodes represent devices on the SPI bus
- See ../spi/spi-bus.txt
-
-Example:
- spi@9840000 {
- compatible = "st,comms-ssc4-spi";
- reg = <0x9840000 0x110>;
- interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
- clock-names = "ssc";
- pinctrl-0 = <&pinctrl_spi0_default>;
- pinctrl-names = "default";
- cs-gpios = <&pio17 5 0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- st95hf@0{
- compatible = "st,st95hf";
- reg = <0>;
- spi-max-frequency = <1000000>;
- interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
- };
- };
new file mode 100644
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/st,ssc-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics SSC SPI Controller
+
+description: |
+ The STMicroelectronics SSC SPI controller can be found on STi platforms
+ and it used to communicate with external devices using the
+ Serial Peripheral Interface.
+
+maintainers:
+ - Patrice Chotard <patrice.chotard@foss.st.com>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ const: st,comms-ssc4-spi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: ssc
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stih407-clks.h>
+ spi@9840000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9840000 0x110>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ pinctrl-0 = <&pinctrl_spi0_default>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+...
@@ -2926,6 +2926,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
W: http://www.stlinux.com
F: Documentation/devicetree/bindings/i2c/st,sti-i2c.yaml
+F: Documentation/devicetree/bindings/spi/st,ssc-spi.yaml
F: arch/arm/boot/dts/sti*
F: arch/arm/mach-sti/
F: drivers/ata/ahci_st.c