[v6,24/26] powerpc/pseries: Implement secvars for dynamic secure boot

Message ID 20230210080401.345462-25-ajd@linux.ibm.com
State New
Headers
Series pSeries dynamic secure boot secvar interface + platform keyring loading |

Commit Message

Andrew Donnellan Feb. 10, 2023, 8:03 a.m. UTC
  From: Russell Currey <ruscur@russell.cc>

The pseries platform can support dynamic secure boot (i.e. secure boot
using user-defined keys) using variables contained with the PowerVM LPAR
Platform KeyStore (PLPKS).  Using the powerpc secvar API, expose the
relevant variables for pseries dynamic secure boot through the existing
secvar filesystem layout.

The relevant variables for dynamic secure boot are signed in the
keystore, and can only be modified using the H_PKS_SIGNED_UPDATE hcall.
Object labels in the keystore are encoded using ucs2 format.  With our
fixed variable names we don't have to care about encoding outside of the
necessary byte padding.

When a user writes to a variable, the first 8 bytes of data must contain
the signed update flags as defined by the hypervisor.

When a user reads a variable, the first 4 bytes of data contain the
policies defined for the object.

Limitations exist due to the underlying implementation of sysfs binary
attributes, as is the case for the OPAL secvar implementation -
partial writes are unsupported and writes cannot be larger than PAGE_SIZE.
(Even when using bin_attributes, which can be larger than a single page,
sysfs only gives us one page's worth of write buffer at a time, and the
hypervisor does not expose an interface for partial writes.)

Co-developed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>

---

v2: Remove unnecessary config vars from sysfs and document the others,
    thanks to review from Greg.  If we end up needing to expose more, we
    can add them later and update the docs.

    Use sysfs_emit() instead of sprintf(), thanks to Greg.

    Change the size of the sysfs binary attributes to include the 8-byte
    flags header, preventing truncation of large writes.

v3: plpks_set_variable(): pass var to plpks_signed_update_var() as a
    pointer (mpe)

    Update copyright date (ajd)

    Consistent comment style (ajd)

    Change device_initcall() to machine_arch_initcall(pseries...) so we
    don't try to load on powernv and kill the machine (mpe)

    Add config attributes into plpks_secvar_ops (mpe)

    Get rid of PLPKS_SECVAR_COUNT macro (mpe)

    Reworded descriptions in ABI documentation (mpe)

    Switch to using secvar_ops->var_names rather than
    secvar_ops->get_next() (ajd/mpe)

    Optimise allocation/copying of buffers (mpe)

    Elaborate the comment documenting the "format" string (mpe)

    Return -EIO on errors in the read case (mpe)

    Add "grubdbx" variable (Sudhakar Kuppusamy)

    Use utf8s_to_utf16s() rather than our own "UCS-2" conversion code (mpe)

    Change uint64_t to u64 (mpe)

    Fix SB_VERSION data length (ruscur)

    Stop prepending policy data on read (ruscur)

    Enforce max format length on format string (not strictly needed, but
    makes the length limit clear) (ajd)

    Update include of plpks.h to reflect new path (ruscur)

    Consistent constant naming scheme (ruscur)

v4: Return set_secvar_ops() return code

    Pass buffer size to plpks_secvar_format() (stefanb, npiggin)

    Add missing null check (stefanb)

    Add comment to commit message explaining PAGE_SIZE write limit (joel)

v5: Add comment explaining why we use "key_len - 1" (npiggin)

    Use strlen(var.name) instead of hardcoding 10 as length of
    "SB_VERSION" (npiggin)

    Improve comments about use of SB_VERSION and format string (npiggin)

    Change "+ 8" to "+ sizeof(u64)" when accounting for flags size in
    working out file's max size (npiggin)

    Compile plpks-secvar.c based on CONFIG_PPC_SECURE_BOOT, not
    CONFIG_PPC_SECVAR_SYSFS, as the secvar backend is needed for loading
    keys into keyrings even if the sysfs interface is disabled (ajd)

v6: Update date in ABI docs (stefanb)

    Get rid of 1 byte kzalloc (npiggin)
---
 Documentation/ABI/testing/sysfs-secvar        |  75 +++++-
 arch/powerpc/platforms/pseries/Makefile       |   4 +-
 arch/powerpc/platforms/pseries/plpks-secvar.c | 218 ++++++++++++++++++
 3 files changed, 294 insertions(+), 3 deletions(-)
 create mode 100644 arch/powerpc/platforms/pseries/plpks-secvar.c
  

Comments

Stefan Berger Feb. 10, 2023, 9:23 p.m. UTC | #1
On 2/10/23 03:03, Andrew Donnellan wrote:
> From: Russell Currey <ruscur@russell.cc>
> 
> The pseries platform can support dynamic secure boot (i.e. secure boot
> using user-defined keys) using variables contained with the PowerVM LPAR
> Platform KeyStore (PLPKS).  Using the powerpc secvar API, expose the
> relevant variables for pseries dynamic secure boot through the existing
> secvar filesystem layout.
> 
> The relevant variables for dynamic secure boot are signed in the
> keystore, and can only be modified using the H_PKS_SIGNED_UPDATE hcall.
> Object labels in the keystore are encoded using ucs2 format.  With our
> fixed variable names we don't have to care about encoding outside of the
> necessary byte padding.
> 
> When a user writes to a variable, the first 8 bytes of data must contain
> the signed update flags as defined by the hypervisor.
> 
> When a user reads a variable, the first 4 bytes of data contain the
> policies defined for the object.
> 
> Limitations exist due to the underlying implementation of sysfs binary
> attributes, as is the case for the OPAL secvar implementation -
> partial writes are unsupported and writes cannot be larger than PAGE_SIZE.
> (Even when using bin_attributes, which can be larger than a single page,
> sysfs only gives us one page's worth of write buffer at a time, and the
> hypervisor does not expose an interface for partial writes.)
> 
> Co-developed-by: Nayna Jain <nayna@linux.ibm.com>
> Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
> Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
> Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
> Signed-off-by: Russell Currey <ruscur@russell.cc>
> 
> ---
> 
> v2: Remove unnecessary config vars from sysfs and document the others,
>      thanks to review from Greg.  If we end up needing to expose more, we
>      can add them later and update the docs.
> 
>      Use sysfs_emit() instead of sprintf(), thanks to Greg.
> 
>      Change the size of the sysfs binary attributes to include the 8-byte
>      flags header, preventing truncation of large writes.
> 
> v3: plpks_set_variable(): pass var to plpks_signed_update_var() as a
>      pointer (mpe)
> 
>      Update copyright date (ajd)
> 
>      Consistent comment style (ajd)
> 
>      Change device_initcall() to machine_arch_initcall(pseries...) so we
>      don't try to load on powernv and kill the machine (mpe)
> 
>      Add config attributes into plpks_secvar_ops (mpe)
> 
>      Get rid of PLPKS_SECVAR_COUNT macro (mpe)
> 
>      Reworded descriptions in ABI documentation (mpe)
> 
>      Switch to using secvar_ops->var_names rather than
>      secvar_ops->get_next() (ajd/mpe)
> 
>      Optimise allocation/copying of buffers (mpe)
> 
>      Elaborate the comment documenting the "format" string (mpe)
> 
>      Return -EIO on errors in the read case (mpe)
> 
>      Add "grubdbx" variable (Sudhakar Kuppusamy)
> 
>      Use utf8s_to_utf16s() rather than our own "UCS-2" conversion code (mpe)
> 
>      Change uint64_t to u64 (mpe)
> 
>      Fix SB_VERSION data length (ruscur)
> 
>      Stop prepending policy data on read (ruscur)
> 
>      Enforce max format length on format string (not strictly needed, but
>      makes the length limit clear) (ajd)
> 
>      Update include of plpks.h to reflect new path (ruscur)
> 
>      Consistent constant naming scheme (ruscur)
> 
> v4: Return set_secvar_ops() return code
> 
>      Pass buffer size to plpks_secvar_format() (stefanb, npiggin)
> 
>      Add missing null check (stefanb)
> 
>      Add comment to commit message explaining PAGE_SIZE write limit (joel)
> 
> v5: Add comment explaining why we use "key_len - 1" (npiggin)
> 
>      Use strlen(var.name) instead of hardcoding 10 as length of
>      "SB_VERSION" (npiggin)
> 
>      Improve comments about use of SB_VERSION and format string (npiggin)
> 
>      Change "+ 8" to "+ sizeof(u64)" when accounting for flags size in
>      working out file's max size (npiggin)
> 
>      Compile plpks-secvar.c based on CONFIG_PPC_SECURE_BOOT, not
>      CONFIG_PPC_SECVAR_SYSFS, as the secvar backend is needed for loading
>      keys into keyrings even if the sysfs interface is disabled (ajd)
> 
> v6: Update date in ABI docs (stefanb)
> 
>      Get rid of 1 byte kzalloc (npiggin)
> ---
>   Documentation/ABI/testing/sysfs-secvar        |  75 +++++-
>   arch/powerpc/platforms/pseries/Makefile       |   4 +-
>   arch/powerpc/platforms/pseries/plpks-secvar.c | 218 ++++++++++++++++++
>   3 files changed, 294 insertions(+), 3 deletions(-)
>   create mode 100644 arch/powerpc/platforms/pseries/plpks-secvar.c
> 
> diff --git a/Documentation/ABI/testing/sysfs-secvar b/Documentation/ABI/testing/sysfs-secvar
> index feebb8c57294..857cf12b0904 100644
> --- a/Documentation/ABI/testing/sysfs-secvar
> +++ b/Documentation/ABI/testing/sysfs-secvar
> @@ -18,6 +18,14 @@ Description:	A string indicating which backend is in use by the firmware.
>   		This determines the format of the variable and the accepted
>   		format of variable updates.
>   
> +		On powernv/OPAL, this value is provided by the OPAL firmware
> +		and is expected to be "ibm,edk2-compat-v1".
> +
> +		On pseries/PLPKS, this is generated by the kernel based on the
> +		version number in the SB_VERSION variable in the keystore, and
> +		has the form "ibm,plpks-sb-v<version>", or
> +		"ibm,plpks-sb-unknown" if there is no SB_VERSION variable.
> +
>   What:		/sys/firmware/secvar/vars/<variable name>
>   Date:		August 2019
>   Contact:	Nayna Jain <nayna@linux.ibm.com>
> @@ -34,7 +42,7 @@ Description:	An integer representation of the size of the content of the
>   
>   What:		/sys/firmware/secvar/vars/<variable_name>/data
>   Date:		August 2019
> -Contact:	Nayna Jain h<nayna@linux.ibm.com>
> +Contact:	Nayna Jain <nayna@linux.ibm.com>
>   Description:	A read-only file containing the value of the variable. The size
>   		of the file represents the maximum size of the variable data.
>   
> @@ -44,3 +52,68 @@ Contact:	Nayna Jain <nayna@linux.ibm.com>
>   Description:	A write-only file that is used to submit the new value for the
>   		variable. The size of the file represents the maximum size of
>   		the variable data that can be written.
> +
> +What:		/sys/firmware/secvar/config
> +Date:		February 2023
> +Contact:	Nayna Jain <nayna@linux.ibm.com>
> +Description:	This optional directory contains read-only config attributes as
> +		defined by the secure variable implementation.  All data is in
> +		ASCII format. The directory is only created if the backing
> +		implementation provides variables to populate it, which at
> +		present is only PLPKS on the pseries platform.
> +
> +What:		/sys/firmware/secvar/config/version
> +Date:		February 2023
> +Contact:	Nayna Jain <nayna@linux.ibm.com>
> +Description:	Config version as reported by the hypervisor in ASCII decimal
> +		format.
> +
> +		Currently only provided by PLPKS on the pseries platform.
> +
> +What:		/sys/firmware/secvar/config/max_object_size
> +Date:		February 2023
> +Contact:	Nayna Jain <nayna@linux.ibm.com>
> +Description:	Maximum allowed size of	objects in the keystore in bytes,
> +		represented in ASCII decimal format.
> +
> +		This is not necessarily the same as the max size that can be
> +		written to an update file as writes can contain more than
> +		object data, you should use the size of the update file for
> +		that purpose.
> +
> +		Currently only provided by PLPKS on the pseries platform.
> +
> +What:		/sys/firmware/secvar/config/total_size
> +Date:		February 2023
> +Contact:	Nayna Jain <nayna@linux.ibm.com>
> +Description:	Total size of the PLPKS in bytes, represented in ASCII decimal
> +		format.
> +
> +		Currently only provided by PLPKS on the pseries platform.
> +
> +What:		/sys/firmware/secvar/config/used_space
> +Date:		February 2023
> +Contact:	Nayna Jain <nayna@linux.ibm.com>
> +Description:	Current space consumed by the key store, in bytes, represented
> +		in ASCII decimal format.
> +
> +		Currently only provided by PLPKS on the pseries platform.
> +
> +What:		/sys/firmware/secvar/config/supported_policies
> +Date:		February 2023
> +Contact:	Nayna Jain <nayna@linux.ibm.com>
> +Description:	Bitmask of supported policy flags by the hypervisor,
> +		represented as an 8 byte hexadecimal ASCII string. Consult the
> +		hypervisor documentation for what these flags are.
> +
> +		Currently only provided by PLPKS on the pseries platform.
> +
> +What:		/sys/firmware/secvar/config/signed_update_algorithms
> +Date:		February 2023
> +Contact:	Nayna Jain <nayna@linux.ibm.com>
> +Description:	Bitmask of flags indicating which algorithms the hypervisor
> +		supports for signed update of objects, represented as a 16 byte
> +		hexadecimal ASCII string. Consult the hypervisor documentation
> +		for what these flags mean.
> +
> +		Currently only provided by PLPKS on the pseries platform.
> diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
> index 92310202bdd7..20a0f3c3fe04 100644
> --- a/arch/powerpc/platforms/pseries/Makefile
> +++ b/arch/powerpc/platforms/pseries/Makefile
> @@ -27,8 +27,8 @@ obj-$(CONFIG_PAPR_SCM)		+= papr_scm.o
>   obj-$(CONFIG_PPC_SPLPAR)	+= vphn.o
>   obj-$(CONFIG_PPC_SVM)		+= svm.o
>   obj-$(CONFIG_FA_DUMP)		+= rtas-fadump.o
> -obj-$(CONFIG_PSERIES_PLPKS) += plpks.o
> -
> +obj-$(CONFIG_PSERIES_PLPKS)	+= plpks.o
> +obj-$(CONFIG_PPC_SECURE_BOOT)	+= plpks-secvar.o
>   obj-$(CONFIG_SUSPEND)		+= suspend.o
>   obj-$(CONFIG_PPC_VAS)		+= vas.o vas-sysfs.o
>   
> diff --git a/arch/powerpc/platforms/pseries/plpks-secvar.c b/arch/powerpc/platforms/pseries/plpks-secvar.c
> new file mode 100644
> index 000000000000..98d0f2b31e0d
> --- /dev/null
> +++ b/arch/powerpc/platforms/pseries/plpks-secvar.c
> @@ -0,0 +1,218 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +// Secure variable implementation using the PowerVM LPAR Platform KeyStore (PLPKS)
> +//
> +// Copyright 2022, 2023 IBM Corporation
> +// Authors: Russell Currey
> +//          Andrew Donnellan
> +//          Nayna Jain
> +
> +#define pr_fmt(fmt) "secvar: "fmt
> +
> +#include <linux/printk.h>
> +#include <linux/init.h>
> +#include <linux/types.h>
> +#include <linux/slab.h>
> +#include <linux/string.h>
> +#include <linux/kobject.h>
> +#include <linux/nls.h>
> +#include <asm/machdep.h>
> +#include <asm/secvar.h>
> +#include <asm/plpks.h>
> +
> +// Config attributes for sysfs
> +#define PLPKS_CONFIG_ATTR(name, fmt, func)			\
> +	static ssize_t name##_show(struct kobject *kobj,	\
> +				   struct kobj_attribute *attr,	\
> +				   char *buf)			\
> +	{							\
> +		return sysfs_emit(buf, fmt, func());		\
> +	}							\
> +	static struct kobj_attribute attr_##name = __ATTR_RO(name)
> +
> +PLPKS_CONFIG_ATTR(version, "%u\n", plpks_get_version);
> +PLPKS_CONFIG_ATTR(max_object_size, "%u\n", plpks_get_maxobjectsize);
> +PLPKS_CONFIG_ATTR(total_size, "%u\n", plpks_get_totalsize);
> +PLPKS_CONFIG_ATTR(used_space, "%u\n", plpks_get_usedspace);
> +PLPKS_CONFIG_ATTR(supported_policies, "%08x\n", plpks_get_supportedpolicies);
> +PLPKS_CONFIG_ATTR(signed_update_algorithms, "%016llx\n", plpks_get_signedupdatealgorithms);
> +
> +static const struct attribute *config_attrs[] = {
> +	&attr_version.attr,
> +	&attr_max_object_size.attr,
> +	&attr_total_size.attr,
> +	&attr_used_space.attr,
> +	&attr_supported_policies.attr,
> +	&attr_signed_update_algorithms.attr,
> +	NULL,
> +};
> +
> +static u32 get_policy(const char *name)
> +{
> +	if ((strcmp(name, "db") == 0) ||
> +	    (strcmp(name, "dbx") == 0) ||
> +	    (strcmp(name, "grubdb") == 0) ||
> +	    (strcmp(name, "grubdbx") == 0) ||
> +	    (strcmp(name, "sbat") == 0))
> +		return (PLPKS_WORLDREADABLE | PLPKS_SIGNEDUPDATE);
> +	else
> +		return PLPKS_SIGNEDUPDATE;
> +}
> +
> +static const char * const plpks_var_names[] = {
> +	"PK",
> +	"KEK",
> +	"db",
> +	"dbx",
> +	"grubdb",
> +	"grubdbx",
> +	"sbat",
> +	"moduledb",
> +	"trustedcadb",
> +	NULL,
> +};
> +
> +static int plpks_get_variable(const char *key, u64 key_len, u8 *data,
> +			      u64 *data_size)
> +{
> +	struct plpks_var var = {0};
> +	int rc = 0;
> +
> +	// We subtract 1 from key_len because we don't need to include the
> +	// null terminator at the end of the string
> +	var.name = kcalloc(key_len - 1, sizeof(wchar_t), GFP_KERNEL);
> +	if (!var.name)
> +		return -ENOMEM;
> +	rc = utf8s_to_utf16s(key, key_len - 1, UTF16_LITTLE_ENDIAN, (wchar_t *)var.name,
> +			     key_len - 1);
> +	if (rc < 0)
> +		goto err;
> +	var.namelen = rc * 2;
> +
> +	var.os = PLPKS_VAR_LINUX;
> +	if (data) {
> +		var.data = data;
> +		var.datalen = *data_size;
> +	}
> +	rc = plpks_read_os_var(&var);
> +
> +	if (rc)
> +		goto err;
> +
> +	*data_size = var.datalen;
> +
> +err:
> +	kfree(var.name);
> +	if (rc && rc != -ENOENT) {
> +		pr_err("Failed to read variable '%s': %d\n", key, rc);
> +		// Return -EIO since userspace probably doesn't care about the
> +		// specific error
> +		rc = -EIO;
> +	}
> +	return rc;
> +}
> +
> +static int plpks_set_variable(const char *key, u64 key_len, u8 *data,
> +			      u64 data_size)
> +{
> +	struct plpks_var var = {0};
> +	int rc = 0;
> +	u64 flags;
> +
> +	// Secure variables need to be prefixed with 8 bytes of flags.
> +	// We only want to perform the write if we have at least one byte of data.
> +	if (data_size <= sizeof(flags))
> +		return -EINVAL;
> +
> +	// We subtract 1 from key_len because we don't need to include the
> +	// null terminator at the end of the string
> +	var.name = kcalloc(key_len - 1, sizeof(wchar_t), GFP_KERNEL);
> +	if (!var.name)
> +		return -ENOMEM;
> +	rc = utf8s_to_utf16s(key, key_len - 1, UTF16_LITTLE_ENDIAN, (wchar_t *)var.name,
> +			     key_len - 1);
> +	if (rc < 0)
> +		goto err;
> +	var.namelen = rc * 2;
> +
> +	memcpy(&flags, data, sizeof(flags));

conversion from bytestream to integer: I think in this case it would be better to use

flags = cpu_to_be64p((__u64*)data);

so that the flags always in hypervisor/big endian format

> +
> +	var.datalen = data_size - sizeof(flags);
> +	var.data = data + sizeof(flags);
> +	var.os = PLPKS_VAR_LINUX;
> +	var.policy = get_policy(key);
> +
> +	// Unlike in the read case, the plpks error code can be useful to
> +	// userspace on write, so we return it rather than just -EIO
> +	rc = plpks_signed_update_var(&var, flags);
> +
> +err:
> +	kfree(var.name);
> +	return rc;
> +}
> +
> +// PLPKS dynamic secure boot doesn't give us a format string in the same way OPAL does.
> +// Instead, report the format using the SB_VERSION variable in the keystore.
> +// The string is made up by us, and takes the form "ibm,plpks-sb-v<n>" (or "ibm,plpks-sb-unknown"
> +// if the SB_VERSION variable doesn't exist). Hypervisor defines the SB_VERSION variable as a
> +// "1 byte unsigned integer value".
> +static ssize_t plpks_secvar_format(char *buf, size_t bufsize)
> +{
> +	struct plpks_var var = {0};
> +	ssize_t ret;
> +	u8 version;
> +
> +	var.component = NULL;

Since it's initialized with {0} this is not necessary.

> +	// Only the signed variables have null bytes in their names, this one doesn't
> +	var.name = "SB_VERSION";
> +	var.namelen = strlen(var.name);
> +	var.datalen = 1;
> +	var.data = &version;
> +
> +	// Unlike the other vars, SB_VERSION is owned by firmware instead of the OS
> +	ret = plpks_read_fw_var(&var);
> +	if (ret) {
> +		if (ret == -ENOENT) {
> +			ret = snprintf(buf, bufsize, "ibm,plpks-sb-unknown");
> +		} else {
> +			pr_err("Error %ld reading SB_VERSION from firmware\n", ret);
> +			ret = -EIO;
> +		}
> +		goto err;
> +	}
> +
> +	ret = snprintf(buf, bufsize, "ibm,plpks-sb-v%hhu", version);
> +
> +err:
> +	kfree(var.data);

remove the kfree()

> +	return ret;
> +}
> +
> +static int plpks_max_size(u64 *max_size)
> +{
> +	// The max object size reported by the hypervisor is accurate for the
> +	// object itself, but we use the first 8 bytes of data on write as the
> +	// signed update flags, so the max size a user can write is larger.
> +	*max_size = (u64)plpks_get_maxobjectsize() + sizeof(u64);
> +
> +	return 0;
> +}
> +
> +
> +static const struct secvar_operations plpks_secvar_ops = {
> +	.get = plpks_get_variable,
> +	.set = plpks_set_variable,
> +	.format = plpks_secvar_format,
> +	.max_size = plpks_max_size,
> +	.config_attrs = config_attrs,
> +	.var_names = plpks_var_names,
> +};
> +
> +static int plpks_secvar_init(void)
> +{
> +	if (!plpks_is_available())
> +		return -ENODEV;
> +
> +	return set_secvar_ops(&plpks_secvar_ops);
> +}
> +machine_device_initcall(pseries, plpks_secvar_init);
  
Stefan Berger Feb. 10, 2023, 9:28 p.m. UTC | #2
On 2/10/23 16:23, Stefan Berger wrote:
> 
> 

>> +
>> +// PLPKS dynamic secure boot doesn't give us a format string in the same way OPAL does.
>> +// Instead, report the format using the SB_VERSION variable in the keystore.
>> +// The string is made up by us, and takes the form "ibm,plpks-sb-v<n>" (or "ibm,plpks-sb-unknown"
>> +// if the SB_VERSION variable doesn't exist). Hypervisor defines the SB_VERSION variable as a
>> +// "1 byte unsigned integer value".
>> +static ssize_t plpks_secvar_format(char *buf, size_t bufsize)
>> +{
>> +    struct plpks_var var = {0};
>> +    ssize_t ret;
>> +    u8 version;
>> +
>> +    var.component = NULL;
> 
> Since it's initialized with {0} this is not necessary.
> 
>> +    // Only the signed variables have null bytes in their names, this one doesn't
>> +    var.name = "SB_VERSION";
>> +    var.namelen = strlen(var.name);
>> +    var.datalen = 1;
>> +    var.data = &version;
>> +
>> +    // Unlike the other vars, SB_VERSION is owned by firmware instead of the OS
>> +    ret = plpks_read_fw_var(&var);
>> +    if (ret) {
>> +        if (ret == -ENOENT) {
>> +            ret = snprintf(buf, bufsize, "ibm,plpks-sb-unknown");
>> +        } else {
>> +            pr_err("Error %ld reading SB_VERSION from firmware\n", ret);
>> +            ret = -EIO;
>> +        }
>> +        goto err;
>> +    }
>> +
>> +    ret = snprintf(buf, bufsize, "ibm,plpks-sb-v%hhu", version);
>> +
>> +err:
>> +    kfree(var.data);
> 
> remove the kfree()

Actually don't remove it but it should probably be

if (var.data != &version)
     kfree(var.data);
> 
>> +    return ret;
>> +}
>> +
  
Andrew Donnellan Feb. 12, 2023, 1:33 p.m. UTC | #3
On Fri, 2023-02-10 at 16:28 -0500, Stefan Berger wrote:
> > > +err:
> > > +    kfree(var.data);
> > 
> > remove the kfree()
> 
> Actually don't remove it but it should probably be
> 
> if (var.data != &version)
>      kfree(var.data);
> 

Argh, thanks for catching this.

I don't think the condition is needed - we can assume the var.data is
unmodified.

mpe, are you able to fix this up in merge?
  
Michael Ellerman Feb. 13, 2023, 5:26 a.m. UTC | #4
Andrew Donnellan <ajd@linux.ibm.com> writes:
> On Fri, 2023-02-10 at 16:28 -0500, Stefan Berger wrote:
>> > > +err:
>> > > +    kfree(var.data);
>> > 
>> > remove the kfree()
>> 
>> Actually don't remove it but it should probably be
>> 
>> if (var.data != &version)
>>      kfree(var.data);
>> 
>
> Argh, thanks for catching this.
>
> I don't think the condition is needed - we can assume the var.data is
> unmodified.
>
> mpe, are you able to fix this up in merge?

Yeah, can you reply here with the delta you want applied.

cheers
  
Andrew Donnellan Feb. 13, 2023, 7:06 a.m. UTC | #5
On Fri, 2023-02-10 at 16:23 -0500, Stefan Berger wrote:
> > +       memcpy(&flags, data, sizeof(flags));
> 
> conversion from bytestream to integer: I think in this case it would
> be better to use
> 
> flags = cpu_to_be64p((__u64*)data);
> 
> so that the flags always in hypervisor/big endian format

Thanks for catching this - it turns out we weren't properly testing the
one flag that exists (append vs replace) in our test script, so I
didn't notice this.
  
Andrew Donnellan Feb. 13, 2023, 7:07 a.m. UTC | #6
On Mon, 2023-02-13 at 16:26 +1100, Michael Ellerman wrote:
> Andrew Donnellan <ajd@linux.ibm.com> writes:
> > On Fri, 2023-02-10 at 16:28 -0500, Stefan Berger wrote:
> > > > > +err:
> > > > > +    kfree(var.data);
> > > > 
> > > > remove the kfree()
> > > 
> > > Actually don't remove it but it should probably be
> > > 
> > > if (var.data != &version)
> > >      kfree(var.data);
> > > 
> > 
> > Argh, thanks for catching this.
> > 
> > I don't think the condition is needed - we can assume the var.data
> > is
> > unmodified.
> > 
> > mpe, are you able to fix this up in merge?
> 
> Yeah, can you reply here with the delta you want applied.
> 
> cheers


diff --git a/arch/powerpc/platforms/pseries/plpks-secvar.c
b/arch/powerpc/platforms/pseries/plpks-secvar.c
index 98d0f2b31e0d..bdfe63bc8705 100644
--- a/arch/powerpc/platforms/pseries/plpks-secvar.c
+++ b/arch/powerpc/platforms/pseries/plpks-secvar.c
@@ -135,7 +135,7 @@ static int plpks_set_variable(const char *key, u64
key_len, u8 *data,
 		goto err;
 	var.namelen = rc * 2;
 
-	memcpy(&flags, data, sizeof(flags));
+	flags = cpu_to_be64p((__u64 *)data);
 
 	var.datalen = data_size - sizeof(flags);
 	var.data = data + sizeof(flags);
@@ -184,7 +184,6 @@ static ssize_t plpks_secvar_format(char *buf,
size_t bufsize)
 	ret = snprintf(buf, bufsize, "ibm,plpks-sb-v%hhu", version);
 
 err:
-	kfree(var.data);
 	return ret;
 }
  
Michael Ellerman Feb. 13, 2023, 11:32 a.m. UTC | #7
Stefan Berger <stefanb@linux.ibm.com> writes:
> On 2/10/23 03:03, Andrew Donnellan wrote:
>> From: Russell Currey <ruscur@russell.cc>
...
>> +static int plpks_set_variable(const char *key, u64 key_len, u8 *data,
>> +			      u64 data_size)
>> +{
>> +	struct plpks_var var = {0};
>> +	int rc = 0;
>> +	u64 flags;
>> +
>> +	// Secure variables need to be prefixed with 8 bytes of flags.
>> +	// We only want to perform the write if we have at least one byte of data.
>> +	if (data_size <= sizeof(flags))
>> +		return -EINVAL;
>> +
>> +	// We subtract 1 from key_len because we don't need to include the
>> +	// null terminator at the end of the string
>> +	var.name = kcalloc(key_len - 1, sizeof(wchar_t), GFP_KERNEL);
>> +	if (!var.name)
>> +		return -ENOMEM;
>> +	rc = utf8s_to_utf16s(key, key_len - 1, UTF16_LITTLE_ENDIAN, (wchar_t *)var.name,
>> +			     key_len - 1);
>> +	if (rc < 0)
>> +		goto err;
>> +	var.namelen = rc * 2;
>> +
>> +	memcpy(&flags, data, sizeof(flags));
>
> conversion from bytestream to integer: I think in this case it would be better to use
>
> flags = cpu_to_be64p((__u64*)data);
>
> so that the flags always in hypervisor/big endian format

I don't think it's correct to byte swap the flags here. They must be in
big endian format, but that's up to the caller.

The powernv secvar backend doesn't byte swap the flags, if the pseries
one did then the final content of the variable, written either by phyp
or OPAL, would differ depending on which backend is active.

Or am I missing something?

cheers
  
Stefan Berger Feb. 13, 2023, 1:52 p.m. UTC | #8
On 2/13/23 06:32, Michael Ellerman wrote:
> Stefan Berger <stefanb@linux.ibm.com> writes:
>> On 2/10/23 03:03, Andrew Donnellan wrote:
>>> From: Russell Currey <ruscur@russell.cc>
> ...
>>> +static int plpks_set_variable(const char *key, u64 key_len, u8 *data,
>>> +			      u64 data_size)
>>> +{
>>> +	struct plpks_var var = {0};
>>> +	int rc = 0;
>>> +	u64 flags;
>>> +
>>> +	// Secure variables need to be prefixed with 8 bytes of flags.
>>> +	// We only want to perform the write if we have at least one byte of data.
>>> +	if (data_size <= sizeof(flags))
>>> +		return -EINVAL;
>>> +
>>> +	// We subtract 1 from key_len because we don't need to include the
>>> +	// null terminator at the end of the string
>>> +	var.name = kcalloc(key_len - 1, sizeof(wchar_t), GFP_KERNEL);
>>> +	if (!var.name)
>>> +		return -ENOMEM;
>>> +	rc = utf8s_to_utf16s(key, key_len - 1, UTF16_LITTLE_ENDIAN, (wchar_t *)var.name,
>>> +			     key_len - 1);
>>> +	if (rc < 0)
>>> +		goto err;
>>> +	var.namelen = rc * 2;
>>> +
>>> +	memcpy(&flags, data, sizeof(flags));
>>
>> conversion from bytestream to integer: I think in this case it would be better to use
>>
>> flags = cpu_to_be64p((__u64*)data);
>>
>> so that the flags always in hypervisor/big endian format
> 
> I don't think it's correct to byte swap the flags here. They must be in
> big endian format, but that's up to the caller.
> 
> The powernv secvar backend doesn't byte swap the flags, if the pseries
> one did then the final content of the variable, written either by phyp
> or OPAL, would differ depending on which backend is active.
> 
> Or am I missing something?

It seems wrong to not use the cpu_to_be64p() API to convert a byte stream to flags... That's why I suggested this.

    Stefan

> 
> cheers
  
Andrew Donnellan Feb. 14, 2023, 6:07 a.m. UTC | #9
On Mon, 2023-02-13 at 22:32 +1100, Michael Ellerman wrote:
> > > +       memcpy(&flags, data, sizeof(flags));
> > 
> > conversion from bytestream to integer: I think in this case it
> > would be better to use
> > 
> > flags = cpu_to_be64p((__u64*)data);
> > 
> > so that the flags always in hypervisor/big endian format
> 
> I don't think it's correct to byte swap the flags here. They must be
> in
> big endian format, but that's up to the caller.

That was what I initially thought, until I went and tested it properly
and found it was indeed broken (at least in our qemu environment, this
is slightly tricky for me to test right now on real hardware with real
PowerVM) depending on kernel endianness.

- Userspace writes the flags into the buffer in BE order

- The first 8 bytes of the buffer are memcpy()ed, in BE order, into
flags (a u64)

- plpar_hcall9() is called with flags as an argument, loaded into r9

- r9 is moved to r8 before jumping into the hypervisor

On a BE system, this works fine. On an LE system, this results in the
bytes in the flags variable being loaded into the register in LE order,
so the conversion is necessary.

> The powernv secvar backend doesn't byte swap the flags, if the
> pseries
> one did then the final content of the variable, written either by
> phyp
> or OPAL, would differ depending on which backend is active.
> 
> Or am I missing something?

The powernv secvar backend doesn't have a notion of flags at all. (The
flags interface for pseries is a little ugly, but it gets the job done
- userspace can read the format attribute to discover what it needs to
do.)
  
Michael Ellerman Feb. 15, 2023, 11:46 a.m. UTC | #10
Andrew Donnellan <ajd@linux.ibm.com> writes:
> On Mon, 2023-02-13 at 22:32 +1100, Michael Ellerman wrote:
>> > > +       memcpy(&flags, data, sizeof(flags));
>> > 
>> > conversion from bytestream to integer: I think in this case it
>> > would be better to use
>> > 
>> > flags = cpu_to_be64p((__u64*)data);
>> > 
>> > so that the flags always in hypervisor/big endian format
>> 
>> I don't think it's correct to byte swap the flags here. They must be
>> in big endian format, but that's up to the caller.
>
> That was what I initially thought, until I went and tested it properly
> and found it was indeed broken (at least in our qemu environment, this
> is slightly tricky for me to test right now on real hardware with real
> PowerVM) depending on kernel endianness.
>
> - Userspace writes the flags into the buffer in BE order
>
> - The first 8 bytes of the buffer are memcpy()ed, in BE order, into
> flags (a u64)
>
> - plpar_hcall9() is called with flags as an argument, loaded into r9
>
> - r9 is moved to r8 before jumping into the hypervisor
>
> On a BE system, this works fine. On an LE system, this results in the
> bytes in the flags variable being loaded into the register in LE order,
> so the conversion is necessary.

Ah yep of course. So although the flags are written by userspace as part
of the data as a stream of bytes, they're passed to the HV via a
register.

I've had this patch in next for a few days and don't want to rebase it.
So can you send a follow-up patch to fix the flags endianess, with a
nice changelog and comment :)

cheers
  

Patch

diff --git a/Documentation/ABI/testing/sysfs-secvar b/Documentation/ABI/testing/sysfs-secvar
index feebb8c57294..857cf12b0904 100644
--- a/Documentation/ABI/testing/sysfs-secvar
+++ b/Documentation/ABI/testing/sysfs-secvar
@@ -18,6 +18,14 @@  Description:	A string indicating which backend is in use by the firmware.
 		This determines the format of the variable and the accepted
 		format of variable updates.
 
+		On powernv/OPAL, this value is provided by the OPAL firmware
+		and is expected to be "ibm,edk2-compat-v1".
+
+		On pseries/PLPKS, this is generated by the kernel based on the
+		version number in the SB_VERSION variable in the keystore, and
+		has the form "ibm,plpks-sb-v<version>", or
+		"ibm,plpks-sb-unknown" if there is no SB_VERSION variable.
+
 What:		/sys/firmware/secvar/vars/<variable name>
 Date:		August 2019
 Contact:	Nayna Jain <nayna@linux.ibm.com>
@@ -34,7 +42,7 @@  Description:	An integer representation of the size of the content of the
 
 What:		/sys/firmware/secvar/vars/<variable_name>/data
 Date:		August 2019
-Contact:	Nayna Jain h<nayna@linux.ibm.com>
+Contact:	Nayna Jain <nayna@linux.ibm.com>
 Description:	A read-only file containing the value of the variable. The size
 		of the file represents the maximum size of the variable data.
 
@@ -44,3 +52,68 @@  Contact:	Nayna Jain <nayna@linux.ibm.com>
 Description:	A write-only file that is used to submit the new value for the
 		variable. The size of the file represents the maximum size of
 		the variable data that can be written.
+
+What:		/sys/firmware/secvar/config
+Date:		February 2023
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	This optional directory contains read-only config attributes as
+		defined by the secure variable implementation.  All data is in
+		ASCII format. The directory is only created if the backing
+		implementation provides variables to populate it, which at
+		present is only PLPKS on the pseries platform.
+
+What:		/sys/firmware/secvar/config/version
+Date:		February 2023
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	Config version as reported by the hypervisor in ASCII decimal
+		format.
+
+		Currently only provided by PLPKS on the pseries platform.
+
+What:		/sys/firmware/secvar/config/max_object_size
+Date:		February 2023
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	Maximum allowed size of	objects in the keystore in bytes,
+		represented in ASCII decimal format.
+
+		This is not necessarily the same as the max size that can be
+		written to an update file as writes can contain more than
+		object data, you should use the size of the update file for
+		that purpose.
+
+		Currently only provided by PLPKS on the pseries platform.
+
+What:		/sys/firmware/secvar/config/total_size
+Date:		February 2023
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	Total size of the PLPKS in bytes, represented in ASCII decimal
+		format.
+
+		Currently only provided by PLPKS on the pseries platform.
+
+What:		/sys/firmware/secvar/config/used_space
+Date:		February 2023
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	Current space consumed by the key store, in bytes, represented
+		in ASCII decimal format.
+
+		Currently only provided by PLPKS on the pseries platform.
+
+What:		/sys/firmware/secvar/config/supported_policies
+Date:		February 2023
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	Bitmask of supported policy flags by the hypervisor,
+		represented as an 8 byte hexadecimal ASCII string. Consult the
+		hypervisor documentation for what these flags are.
+
+		Currently only provided by PLPKS on the pseries platform.
+
+What:		/sys/firmware/secvar/config/signed_update_algorithms
+Date:		February 2023
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	Bitmask of flags indicating which algorithms the hypervisor
+		supports for signed update of objects, represented as a 16 byte
+		hexadecimal ASCII string. Consult the hypervisor documentation
+		for what these flags mean.
+
+		Currently only provided by PLPKS on the pseries platform.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 92310202bdd7..20a0f3c3fe04 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -27,8 +27,8 @@  obj-$(CONFIG_PAPR_SCM)		+= papr_scm.o
 obj-$(CONFIG_PPC_SPLPAR)	+= vphn.o
 obj-$(CONFIG_PPC_SVM)		+= svm.o
 obj-$(CONFIG_FA_DUMP)		+= rtas-fadump.o
-obj-$(CONFIG_PSERIES_PLPKS) += plpks.o
-
+obj-$(CONFIG_PSERIES_PLPKS)	+= plpks.o
+obj-$(CONFIG_PPC_SECURE_BOOT)	+= plpks-secvar.o
 obj-$(CONFIG_SUSPEND)		+= suspend.o
 obj-$(CONFIG_PPC_VAS)		+= vas.o vas-sysfs.o
 
diff --git a/arch/powerpc/platforms/pseries/plpks-secvar.c b/arch/powerpc/platforms/pseries/plpks-secvar.c
new file mode 100644
index 000000000000..98d0f2b31e0d
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/plpks-secvar.c
@@ -0,0 +1,218 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+// Secure variable implementation using the PowerVM LPAR Platform KeyStore (PLPKS)
+//
+// Copyright 2022, 2023 IBM Corporation
+// Authors: Russell Currey
+//          Andrew Donnellan
+//          Nayna Jain
+
+#define pr_fmt(fmt) "secvar: "fmt
+
+#include <linux/printk.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/kobject.h>
+#include <linux/nls.h>
+#include <asm/machdep.h>
+#include <asm/secvar.h>
+#include <asm/plpks.h>
+
+// Config attributes for sysfs
+#define PLPKS_CONFIG_ATTR(name, fmt, func)			\
+	static ssize_t name##_show(struct kobject *kobj,	\
+				   struct kobj_attribute *attr,	\
+				   char *buf)			\
+	{							\
+		return sysfs_emit(buf, fmt, func());		\
+	}							\
+	static struct kobj_attribute attr_##name = __ATTR_RO(name)
+
+PLPKS_CONFIG_ATTR(version, "%u\n", plpks_get_version);
+PLPKS_CONFIG_ATTR(max_object_size, "%u\n", plpks_get_maxobjectsize);
+PLPKS_CONFIG_ATTR(total_size, "%u\n", plpks_get_totalsize);
+PLPKS_CONFIG_ATTR(used_space, "%u\n", plpks_get_usedspace);
+PLPKS_CONFIG_ATTR(supported_policies, "%08x\n", plpks_get_supportedpolicies);
+PLPKS_CONFIG_ATTR(signed_update_algorithms, "%016llx\n", plpks_get_signedupdatealgorithms);
+
+static const struct attribute *config_attrs[] = {
+	&attr_version.attr,
+	&attr_max_object_size.attr,
+	&attr_total_size.attr,
+	&attr_used_space.attr,
+	&attr_supported_policies.attr,
+	&attr_signed_update_algorithms.attr,
+	NULL,
+};
+
+static u32 get_policy(const char *name)
+{
+	if ((strcmp(name, "db") == 0) ||
+	    (strcmp(name, "dbx") == 0) ||
+	    (strcmp(name, "grubdb") == 0) ||
+	    (strcmp(name, "grubdbx") == 0) ||
+	    (strcmp(name, "sbat") == 0))
+		return (PLPKS_WORLDREADABLE | PLPKS_SIGNEDUPDATE);
+	else
+		return PLPKS_SIGNEDUPDATE;
+}
+
+static const char * const plpks_var_names[] = {
+	"PK",
+	"KEK",
+	"db",
+	"dbx",
+	"grubdb",
+	"grubdbx",
+	"sbat",
+	"moduledb",
+	"trustedcadb",
+	NULL,
+};
+
+static int plpks_get_variable(const char *key, u64 key_len, u8 *data,
+			      u64 *data_size)
+{
+	struct plpks_var var = {0};
+	int rc = 0;
+
+	// We subtract 1 from key_len because we don't need to include the
+	// null terminator at the end of the string
+	var.name = kcalloc(key_len - 1, sizeof(wchar_t), GFP_KERNEL);
+	if (!var.name)
+		return -ENOMEM;
+	rc = utf8s_to_utf16s(key, key_len - 1, UTF16_LITTLE_ENDIAN, (wchar_t *)var.name,
+			     key_len - 1);
+	if (rc < 0)
+		goto err;
+	var.namelen = rc * 2;
+
+	var.os = PLPKS_VAR_LINUX;
+	if (data) {
+		var.data = data;
+		var.datalen = *data_size;
+	}
+	rc = plpks_read_os_var(&var);
+
+	if (rc)
+		goto err;
+
+	*data_size = var.datalen;
+
+err:
+	kfree(var.name);
+	if (rc && rc != -ENOENT) {
+		pr_err("Failed to read variable '%s': %d\n", key, rc);
+		// Return -EIO since userspace probably doesn't care about the
+		// specific error
+		rc = -EIO;
+	}
+	return rc;
+}
+
+static int plpks_set_variable(const char *key, u64 key_len, u8 *data,
+			      u64 data_size)
+{
+	struct plpks_var var = {0};
+	int rc = 0;
+	u64 flags;
+
+	// Secure variables need to be prefixed with 8 bytes of flags.
+	// We only want to perform the write if we have at least one byte of data.
+	if (data_size <= sizeof(flags))
+		return -EINVAL;
+
+	// We subtract 1 from key_len because we don't need to include the
+	// null terminator at the end of the string
+	var.name = kcalloc(key_len - 1, sizeof(wchar_t), GFP_KERNEL);
+	if (!var.name)
+		return -ENOMEM;
+	rc = utf8s_to_utf16s(key, key_len - 1, UTF16_LITTLE_ENDIAN, (wchar_t *)var.name,
+			     key_len - 1);
+	if (rc < 0)
+		goto err;
+	var.namelen = rc * 2;
+
+	memcpy(&flags, data, sizeof(flags));
+
+	var.datalen = data_size - sizeof(flags);
+	var.data = data + sizeof(flags);
+	var.os = PLPKS_VAR_LINUX;
+	var.policy = get_policy(key);
+
+	// Unlike in the read case, the plpks error code can be useful to
+	// userspace on write, so we return it rather than just -EIO
+	rc = plpks_signed_update_var(&var, flags);
+
+err:
+	kfree(var.name);
+	return rc;
+}
+
+// PLPKS dynamic secure boot doesn't give us a format string in the same way OPAL does.
+// Instead, report the format using the SB_VERSION variable in the keystore.
+// The string is made up by us, and takes the form "ibm,plpks-sb-v<n>" (or "ibm,plpks-sb-unknown"
+// if the SB_VERSION variable doesn't exist). Hypervisor defines the SB_VERSION variable as a
+// "1 byte unsigned integer value".
+static ssize_t plpks_secvar_format(char *buf, size_t bufsize)
+{
+	struct plpks_var var = {0};
+	ssize_t ret;
+	u8 version;
+
+	var.component = NULL;
+	// Only the signed variables have null bytes in their names, this one doesn't
+	var.name = "SB_VERSION";
+	var.namelen = strlen(var.name);
+	var.datalen = 1;
+	var.data = &version;
+
+	// Unlike the other vars, SB_VERSION is owned by firmware instead of the OS
+	ret = plpks_read_fw_var(&var);
+	if (ret) {
+		if (ret == -ENOENT) {
+			ret = snprintf(buf, bufsize, "ibm,plpks-sb-unknown");
+		} else {
+			pr_err("Error %ld reading SB_VERSION from firmware\n", ret);
+			ret = -EIO;
+		}
+		goto err;
+	}
+
+	ret = snprintf(buf, bufsize, "ibm,plpks-sb-v%hhu", version);
+
+err:
+	kfree(var.data);
+	return ret;
+}
+
+static int plpks_max_size(u64 *max_size)
+{
+	// The max object size reported by the hypervisor is accurate for the
+	// object itself, but we use the first 8 bytes of data on write as the
+	// signed update flags, so the max size a user can write is larger.
+	*max_size = (u64)plpks_get_maxobjectsize() + sizeof(u64);
+
+	return 0;
+}
+
+
+static const struct secvar_operations plpks_secvar_ops = {
+	.get = plpks_get_variable,
+	.set = plpks_set_variable,
+	.format = plpks_secvar_format,
+	.max_size = plpks_max_size,
+	.config_attrs = config_attrs,
+	.var_names = plpks_var_names,
+};
+
+static int plpks_secvar_init(void)
+{
+	if (!plpks_is_available())
+		return -ENODEV;
+
+	return set_secvar_ops(&plpks_secvar_ops);
+}
+machine_device_initcall(pseries, plpks_secvar_init);