SoC: rt5682s: Disable jack detection interrupt during suspend
Commit Message
The rt5682s driver switches its regmap to cache-only when the
device suspends and back to regular mode on resume. When the
jack detect interrupt fires rt5682s_irq() schedules the jack
detect work. This can result in invalid reads from the regmap
in cache-only mode if the work runs before the device has
resumed:
[ 19.672162] rt5682s 2-001a: ASoC: error at soc_component_read_no_lock on rt5682s.2-001a for register: [0x000000f0] -16
Disable the jack detection interrupt during suspend and
re-enable it on resume. The driver already schedules the
jack detection work on resume, so any state change during
suspend is still handled.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---
sound/soc/codecs/rt5682s.c | 10 +++++++++-
sound/soc/codecs/rt5682s.h | 1 +
2 files changed, 10 insertions(+), 1 deletion(-)
Comments
On Thu, Feb 09, 2023 at 01:20:23AM +0000, Matthias Kaehlcke wrote:
> The rt5682s driver switches its regmap to cache-only when the
> device suspends and back to regular mode on resume. When the
> jack detect interrupt fires rt5682s_irq() schedules the jack
> detect work. This can result in invalid reads from the regmap
> in cache-only mode if the work runs before the device has
> resumed:
Please submit patches using subject lines reflecting the style for the
subsystem, this makes it easier for people to identify relevant patches.
Look at what existing commits in the area you're changing are doing and
make sure your subject lines visually resemble what they're doing.
There's no need to resubmit to fix this alone.
On Thu, 09 Feb 2023 01:20:23 +0000, Matthias Kaehlcke wrote:
> The rt5682s driver switches its regmap to cache-only when the
> device suspends and back to regular mode on resume. When the
> jack detect interrupt fires rt5682s_irq() schedules the jack
> detect work. This can result in invalid reads from the regmap
> in cache-only mode if the work runs before the device has
> resumed:
>
> [...]
Applied to
broonie/sound.git for-next
Thanks!
[1/1] SoC: rt5682s: Disable jack detection interrupt during suspend
commit: f7d00a9be147d9c6feeb19591b39f8102f70cc45
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
@@ -2895,6 +2895,9 @@ static int rt5682s_suspend(struct snd_soc_component *component)
{
struct rt5682s_priv *rt5682s = snd_soc_component_get_drvdata(component);
+ if (rt5682s->irq)
+ disable_irq(rt5682s->irq);
+
cancel_delayed_work_sync(&rt5682s->jack_detect_work);
cancel_delayed_work_sync(&rt5682s->jd_check_work);
@@ -2919,6 +2922,9 @@ static int rt5682s_resume(struct snd_soc_component *component)
&rt5682s->jack_detect_work, msecs_to_jiffies(0));
}
+ if (rt5682s->irq)
+ enable_irq(rt5682s->irq);
+
return 0;
}
#else
@@ -3259,7 +3265,9 @@ static int rt5682s_i2c_probe(struct i2c_client *i2c)
ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, rt5682s_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"rt5682s", rt5682s);
- if (ret)
+ if (!ret)
+ rt5682s->irq = i2c->irq;
+ else
dev_err(&i2c->dev, "Failed to reguest IRQ: %d\n", ret);
}
@@ -1472,6 +1472,7 @@ struct rt5682s_priv {
int pll_comb;
int jack_type;
+ unsigned int irq;
int irq_work_delay_time;
int wclk_enabled;
};