Revert "arm64: dts: ls1028a: sl28: get MAC addresses from VPD"
Commit Message
With commit b203e6f1e833 ("arm64: dts: ls1028a: sl28: get MAC addresses
from VPD"), the network adapter now depends on the nvmem device to be
present, which isn't the case and thus breaks networking on this board.
Revert it.
Fixes: b203e6f1e833 ("arm64: dts: ls1028a: sl28: get MAC addresses from VPD")
Signed-off-by: Michael Walle <michael@walle.cc>
---
Shawn, unfortunately, the driver was NAKed, so this will break our
KernelCI setup. Alternatively, the original commit can just be dropped
from your tree, if that's how you do things like this. I've learned that
the correct way is to get the driver in and then in the next release enable
the driver and add it to the dts. Next time :)
---
.../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 12 ------------
.../freescale/fsl-ls1028a-kontron-sl28-var1.dts | 2 --
.../freescale/fsl-ls1028a-kontron-sl28-var2.dts | 8 --------
.../freescale/fsl-ls1028a-kontron-sl28-var4.dts | 2 --
.../dts/freescale/fsl-ls1028a-kontron-sl28.dts | 17 -----------------
5 files changed, 41 deletions(-)
Comments
On Tue, Feb 07, 2023 at 02:10:20PM +0100, Michael Walle wrote:
> With commit b203e6f1e833 ("arm64: dts: ls1028a: sl28: get MAC addresses
> from VPD"), the network adapter now depends on the nvmem device to be
> present, which isn't the case and thus breaks networking on this board.
> Revert it.
>
> Fixes: b203e6f1e833 ("arm64: dts: ls1028a: sl28: get MAC addresses from VPD")
> Signed-off-by: Michael Walle <michael@walle.cc>
Applied!
> ---
> Shawn, unfortunately, the driver was NAKed, so this will break our
> KernelCI setup. Alternatively, the original commit can just be dropped
> from your tree, if that's how you do things like this. I've learned that
> the correct way is to get the driver in and then in the next release enable
> the driver and add it to the dts. Next time :)
Yes, please follow the correct way!
Shawn
@@ -56,14 +56,10 @@ qsgmii_phy3: ethernet-phy@10 {
};
&enetc_port2 {
- nvmem-cells = <&base_mac_address 2>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
&enetc_port3 {
- nvmem-cells = <&base_mac_address 3>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -84,8 +80,6 @@ &mscc_felix_port0 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy0>;
phy-mode = "qsgmii";
- nvmem-cells = <&base_mac_address 4>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -94,8 +88,6 @@ &mscc_felix_port1 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy1>;
phy-mode = "qsgmii";
- nvmem-cells = <&base_mac_address 5>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -104,8 +96,6 @@ &mscc_felix_port2 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy2>;
phy-mode = "qsgmii";
- nvmem-cells = <&base_mac_address 6>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -114,8 +104,6 @@ &mscc_felix_port3 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy3>;
phy-mode = "qsgmii";
- nvmem-cells = <&base_mac_address 7>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -55,7 +55,5 @@ &enetc_port0 {
&enetc_port1 {
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- nvmem-cells = <&base_mac_address 0>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -36,14 +36,10 @@ &enetc_port0 {
};
&enetc_port2 {
- nvmem-cells = <&base_mac_address 2>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
&enetc_port3 {
- nvmem-cells = <&base_mac_address 3>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -56,8 +52,6 @@ &mscc_felix_port0 {
managed = "in-band-status";
phy-handle = <&phy0>;
phy-mode = "sgmii";
- nvmem-cells = <&base_mac_address 0>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -66,8 +60,6 @@ &mscc_felix_port1 {
managed = "in-band-status";
phy-handle = <&phy1>;
phy-mode = "sgmii";
- nvmem-cells = <&base_mac_address 1>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -43,7 +43,5 @@ vddh: vddh-regulator {
&enetc_port1 {
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
- nvmem-cells = <&base_mac_address 1>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -92,8 +92,6 @@ &enetc_port0 {
phy-handle = <&phy0>;
phy-mode = "sgmii";
managed = "in-band-status";
- nvmem-cells = <&base_mac_address 0>;
- nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -156,21 +154,6 @@ partition@3e0000 {
label = "bootloader environment";
};
};
-
- otp-1 {
- compatible = "user-otp";
-
- nvmem-layout {
- compatible = "kontron,sl28-vpd";
-
- serial_number: serial-number {
- };
-
- base_mac_address: base-mac-address {
- #nvmem-cell-cells = <1>;
- };
- };
- };
};
};