[v4,2/2] fsi: Add IBM I2C Responder virtual FSI master

Message ID 20230202191926.133340-3-eajames@linux.ibm.com
State New
Headers
Series fsi: Add IBM I2C Responder virtual FSI master |

Commit Message

Eddie James Feb. 2, 2023, 7:19 p.m. UTC
  The I2C Responder (I2CR) is an I2C device that translates I2C commands
to CFAM or SCOM operations, effectively implementing an FSI master and
bus.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
Changes since v3:
 - Rework the endian-ness in i2cr_write
 - Rework the tracing to include the i2c bus and device address

 drivers/fsi/Kconfig                    |   9 +
 drivers/fsi/Makefile                   |   1 +
 drivers/fsi/fsi-master-i2cr.c          | 218 +++++++++++++++++++++++++
 include/trace/events/fsi_master_i2cr.h | 109 +++++++++++++
 4 files changed, 337 insertions(+)
 create mode 100644 drivers/fsi/fsi-master-i2cr.c
 create mode 100644 include/trace/events/fsi_master_i2cr.h
  

Comments

Steven Rostedt Feb. 2, 2023, 8:29 p.m. UTC | #1
On Thu,  2 Feb 2023 13:19:26 -0600
Eddie James <eajames@linux.ibm.com> wrote:

> +#include <linux/tracepoint.h>
> +
> +TRACE_EVENT(i2cr_i2c_error,
> +	TP_PROTO(const struct i2c_client *client, __be32 command, int rc),
> +	TP_ARGS(client, command, rc),
> +	TP_STRUCT__entry(
> +		__field(int, bus)
> +		__field(unsigned short, addr)

For all of these, I would put the "unsigned short addr" at the end of
the TP_STRUCT__entry(). That's because you will inject two wasted bytes
in the structure that is generated. Granted, the tracing will likely
word align the result anyway, but still, we don't want holes in the
middle of the structure.

-- Steve


> +		__array(unsigned char, command, sizeof(__be32))
> +		__field(int, rc)
> +	),
> +	TP_fast_assign(
> +		__entry->bus = client->adapter->nr;
> +		__entry->addr = client->addr;
> +		memcpy(__entry->command, &command, sizeof(__be32));
> +		__entry->rc = rc;
> +	),
> +	TP_printk("%d-%02x command:{ %*ph } rc:%d", __entry->bus, __entry->addr,
> +		  (int)sizeof(__be32), __entry->command, __entry->rc)
> +);
> +
> +TRACE_EVENT(i2cr_read,
> +	TP_PROTO(const struct i2c_client *client, uint32_t address, size_t size, __be64 result),
> +	TP_ARGS(client, address, size, result),
> +	TP_STRUCT__entry(
> +		__field(int, bus)
> +		__field(unsigned short, addr)
> +		__field(uint32_t, address)
> +		__field(size_t, size)
> +		__array(unsigned char, result, sizeof(__be64))
> +	),
> +	TP_fast_assign(
> +		__entry->bus = client->adapter->nr;
> +		__entry->addr = client->addr;
> +		__entry->address = address;
> +		__entry->size = size;
> +		memcpy(__entry->result, &result, sizeof(__be64));
> +	),
> +	TP_printk("%d-%02x address:%08x size:%zu { %*ph }", __entry->bus, __entry->addr,
> +		  __entry->address, __entry->size, (int)__entry->size, __entry->result)
> +);
> +
  

Patch

diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
index e6668a869913..999be82720c5 100644
--- a/drivers/fsi/Kconfig
+++ b/drivers/fsi/Kconfig
@@ -62,6 +62,15 @@  config FSI_MASTER_ASPEED
 
 	 Enable it for your BMC kernel in an OpenPower or IBM Power system.
 
+config FSI_MASTER_I2CR
+	tristate "IBM I2C Responder virtual FSI master"
+	depends on I2C
+	help
+	  This option enables a virtual FSI master in order to access a CFAM
+	  behind an IBM I2C Responder (I2CR) chip. The I2CR is an I2C device
+	  that translates I2C commands to CFAM or SCOM operations, effectively
+	  implementing an FSI master and bus.
+
 config FSI_SCOM
 	tristate "SCOM FSI client device driver"
 	help
diff --git a/drivers/fsi/Makefile b/drivers/fsi/Makefile
index da218a1ad8e1..34dbaa1c452e 100644
--- a/drivers/fsi/Makefile
+++ b/drivers/fsi/Makefile
@@ -4,6 +4,7 @@  obj-$(CONFIG_FSI) += fsi-core.o
 obj-$(CONFIG_FSI_MASTER_HUB) += fsi-master-hub.o
 obj-$(CONFIG_FSI_MASTER_ASPEED) += fsi-master-aspeed.o
 obj-$(CONFIG_FSI_MASTER_GPIO) += fsi-master-gpio.o
+obj-$(CONFIG_FSI_MASTER_I2CR) += fsi-master-i2cr.o
 obj-$(CONFIG_FSI_MASTER_AST_CF) += fsi-master-ast-cf.o
 obj-$(CONFIG_FSI_SCOM) += fsi-scom.o
 obj-$(CONFIG_FSI_SBEFIFO) += fsi-sbefifo.o
diff --git a/drivers/fsi/fsi-master-i2cr.c b/drivers/fsi/fsi-master-i2cr.c
new file mode 100644
index 000000000000..7ed93c9f4352
--- /dev/null
+++ b/drivers/fsi/fsi-master-i2cr.c
@@ -0,0 +1,218 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) IBM Corporation 2023 */
+
+#include <linux/device.h>
+#include <linux/fsi.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/mutex.h>
+
+#include "fsi-master.h"
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/fsi_master_i2cr.h>
+
+#define I2CR_ADDRESS_CFAM(a)	((a) >> 2)
+#define I2CR_STATUS		0x30001
+#define  I2CR_STATUS_ERR	 BIT_ULL(61)
+#define I2CR_ERROR		0x30002
+
+struct fsi_master_i2cr {
+	struct fsi_master master;
+	struct mutex lock;	/* protect HW access */
+	struct i2c_client *client;
+};
+
+static bool i2cr_check_parity(u32 v, bool parity)
+{
+	u32 i;
+
+	for (i = 0; i < 32; ++i) {
+		if (v & (1 << i))
+			parity = !parity;
+	}
+
+	return parity;
+}
+
+static __be32 i2cr_get_command(u32 address, bool parity)
+{
+	address <<= 1;
+
+	if (i2cr_check_parity(address, parity))
+		address |= 1;
+
+	return cpu_to_be32(address);
+}
+
+static int i2cr_transfer(struct i2c_client *client, u32 address, __be64 *data)
+{
+	struct i2c_msg msgs[2];
+	__be32 command;
+	int ret;
+
+	command = i2cr_get_command(address, true);
+	msgs[0].addr = client->addr;
+	msgs[0].flags = 0;
+	msgs[0].len = sizeof(command);
+	msgs[0].buf = (__u8 *)&command;
+	msgs[1].addr = client->addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = sizeof(*data);
+	msgs[1].buf = (__u8 *)data;
+
+	ret = i2c_transfer(client->adapter, msgs, 2);
+	if (ret == 2)
+		return 0;
+
+	trace_i2cr_i2c_error(client, command, ret);
+
+	if (ret < 0)
+		return ret;
+
+	return -EIO;
+}
+
+static int i2cr_check_status(struct i2c_client *client)
+{
+	__be64 status_be = 0;
+	u64 status;
+	int ret;
+
+	ret = i2cr_transfer(client, I2CR_STATUS, &status_be);
+	if (ret)
+		return ret;
+
+	status = be64_to_cpu(status_be);
+	if (status & I2CR_STATUS_ERR) {
+		__be64 error_be = 0;
+		u64 error;
+
+		i2cr_transfer(client, I2CR_ERROR, &error_be);
+		error = be64_to_cpu(error_be);
+		trace_i2cr_status_error(client, status, error);
+
+		dev_err(&client->dev, "status:%016llx error:%016llx\n", status, error);
+		return -EREMOTEIO;
+	}
+
+	trace_i2cr_status(client, status);
+	return 0;
+}
+
+static int i2cr_read(struct fsi_master *master, int link, uint8_t id, uint32_t addr, void *val,
+		     size_t size)
+{
+	struct fsi_master_i2cr *i2cr = container_of(master, struct fsi_master_i2cr, master);
+	__be64 data = 0;
+	int ret;
+
+	if (link || id || (addr & 0xffff0000) || !(size == 1 || size == 2 || size == 4))
+		return -EINVAL;
+
+	mutex_lock(&i2cr->lock);
+
+	ret = i2cr_transfer(i2cr->client, I2CR_ADDRESS_CFAM(addr), &data);
+	if (ret)
+		goto unlock;
+
+	ret = i2cr_check_status(i2cr->client);
+	if (ret)
+		goto unlock;
+
+	trace_i2cr_read(i2cr->client, addr, size, data);
+	memcpy(val, &data, size);
+
+unlock:
+	mutex_unlock(&i2cr->lock);
+	return ret;
+}
+
+static int i2cr_write(struct fsi_master *master, int link, uint8_t id, uint32_t addr,
+		      const void *val, size_t size)
+{
+	struct fsi_master_i2cr *i2cr = container_of(master, struct fsi_master_i2cr, master);
+	u32 data[3] = { 0 };
+	__be32 command;
+	int ret;
+
+	if (link || id || (addr & 0xffff0000) || !(size == 1 || size == 2 || size == 4))
+		return -EINVAL;
+
+	memcpy(&data[1], val, size);
+	command = i2cr_get_command(I2CR_ADDRESS_CFAM(addr), i2cr_check_parity(data[1], true));
+	memcpy(&data[0], &command, sizeof(u32));
+
+	mutex_lock(&i2cr->lock);
+
+	ret = i2c_master_send(i2cr->client, (const char *)data, sizeof(data));
+	if (ret == sizeof(data)) {
+		ret = i2cr_check_status(i2cr->client);
+		if (!ret)
+			trace_i2cr_write(i2cr->client, addr, size, data[1]);
+	} else {
+		trace_i2cr_i2c_error(i2cr->client, command, ret);
+
+		if (ret >= 0)
+			ret = -EIO;
+	}
+
+	mutex_unlock(&i2cr->lock);
+	return ret;
+}
+
+static int i2cr_probe(struct i2c_client *client)
+{
+	struct fsi_master_i2cr *i2cr;
+	int ret;
+
+	i2cr = devm_kzalloc(&client->dev, sizeof(*i2cr), GFP_KERNEL);
+	if (!i2cr)
+		return -ENOMEM;
+
+	i2cr->master.dev.parent = &client->dev;
+	i2cr->master.dev.of_node = of_node_get(dev_of_node(&client->dev));
+
+	i2cr->master.n_links = 1;
+	i2cr->master.read = i2cr_read;
+	i2cr->master.write = i2cr_write;
+
+	mutex_init(&i2cr->lock);
+	i2cr->client = client;
+
+	ret = fsi_master_register(&i2cr->master);
+	if (ret)
+		return ret;
+
+	i2c_set_clientdata(client, i2cr);
+	return 0;
+}
+
+static void i2cr_remove(struct i2c_client *client)
+{
+	struct fsi_master_i2cr *i2cr = i2c_get_clientdata(client);
+
+	fsi_master_unregister(&i2cr->master);
+}
+
+static const struct of_device_id i2cr_i2c_ids[] = {
+	{ .compatible = "ibm,i2cr-fsi-master", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, i2cr_i2c_ids);
+
+static struct i2c_driver i2cr_driver = {
+	.probe_new = i2cr_probe,
+	.remove = i2cr_remove,
+	.driver = {
+		.name = "fsi-master-i2cr",
+		.of_match_table = i2cr_i2c_ids,
+	},
+};
+
+module_i2c_driver(i2cr_driver)
+
+MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>");
+MODULE_DESCRIPTION("IBM I2C Responder virtual FSI master driver");
+MODULE_LICENSE("GPL");
diff --git a/include/trace/events/fsi_master_i2cr.h b/include/trace/events/fsi_master_i2cr.h
new file mode 100644
index 000000000000..2ccc8b447999
--- /dev/null
+++ b/include/trace/events/fsi_master_i2cr.h
@@ -0,0 +1,109 @@ 
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM fsi_master_i2cr
+
+#if !defined(_TRACE_FSI_MASTER_I2CR_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_FSI_MASTER_I2CR_H
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(i2cr_i2c_error,
+	TP_PROTO(const struct i2c_client *client, __be32 command, int rc),
+	TP_ARGS(client, command, rc),
+	TP_STRUCT__entry(
+		__field(int, bus)
+		__field(unsigned short, addr)
+		__array(unsigned char, command, sizeof(__be32))
+		__field(int, rc)
+	),
+	TP_fast_assign(
+		__entry->bus = client->adapter->nr;
+		__entry->addr = client->addr;
+		memcpy(__entry->command, &command, sizeof(__be32));
+		__entry->rc = rc;
+	),
+	TP_printk("%d-%02x command:{ %*ph } rc:%d", __entry->bus, __entry->addr,
+		  (int)sizeof(__be32), __entry->command, __entry->rc)
+);
+
+TRACE_EVENT(i2cr_read,
+	TP_PROTO(const struct i2c_client *client, uint32_t address, size_t size, __be64 result),
+	TP_ARGS(client, address, size, result),
+	TP_STRUCT__entry(
+		__field(int, bus)
+		__field(unsigned short, addr)
+		__field(uint32_t, address)
+		__field(size_t, size)
+		__array(unsigned char, result, sizeof(__be64))
+	),
+	TP_fast_assign(
+		__entry->bus = client->adapter->nr;
+		__entry->addr = client->addr;
+		__entry->address = address;
+		__entry->size = size;
+		memcpy(__entry->result, &result, sizeof(__be64));
+	),
+	TP_printk("%d-%02x address:%08x size:%zu { %*ph }", __entry->bus, __entry->addr,
+		  __entry->address, __entry->size, (int)__entry->size, __entry->result)
+);
+
+TRACE_EVENT(i2cr_status,
+	TP_PROTO(const struct i2c_client *client, uint64_t status),
+	TP_ARGS(client, status),
+	TP_STRUCT__entry(
+		__field(int, bus)
+		__field(unsigned short, addr)
+		__field(uint64_t, status)
+	),
+	TP_fast_assign(
+		__entry->bus = client->adapter->nr;
+		__entry->addr = client->addr;
+		__entry->status = status;
+	),
+	TP_printk("%d-%02x %016llx", __entry->bus, __entry->addr, __entry->status)
+);
+
+TRACE_EVENT(i2cr_status_error,
+	TP_PROTO(const struct i2c_client *client, uint64_t status, uint64_t error),
+	TP_ARGS(client, status, error),
+	TP_STRUCT__entry(
+		__field(int, bus)
+		__field(unsigned short, addr)
+		__field(uint64_t, error)
+		__field(uint64_t, status)
+	),
+	TP_fast_assign(
+		__entry->bus = client->adapter->nr;
+		__entry->addr = client->addr;
+		__entry->error = error;
+		__entry->status = status;
+	),
+	TP_printk("%d-%02x status:%016llx error:%016llx", __entry->bus, __entry->addr,
+		  __entry->status, __entry->error)
+);
+
+TRACE_EVENT(i2cr_write,
+	TP_PROTO(const struct i2c_client *client, uint32_t address, size_t size, uint32_t data),
+	TP_ARGS(client, address, size, data),
+	TP_STRUCT__entry(
+		__field(int, bus)
+		__field(unsigned short, addr)
+		__field(uint32_t, address)
+		__field(size_t,	size)
+		__array(unsigned char, data, sizeof(uint32_t))
+	),
+	TP_fast_assign(
+		__entry->bus = client->adapter->nr;
+		__entry->addr = client->addr;
+		__entry->address = address;
+		__entry->size = size;
+		memcpy(__entry->data, &data, sizeof(uint32_t));
+	),
+	TP_printk("%d-%02x address:%08x size:%zu { %*ph }", __entry->bus, __entry->addr,
+		  __entry->address, __entry->size, (int)__entry->size, __entry->data)
+);
+
+#endif
+
+#include <trace/define_trace.h>