diff mbox series

[PATCHv2,3/4] dt-bindings: wiegand: add GPIO bitbanged Wiegand documentation

Message ID 20230202143305.21789-4-m.zatovic1@gmail.com
State New
Headers
Series Wiegand bus driver and GPIO bit-banged controller |

Commit Message

Martin Zaťovič Feb. 2, 2023, 2:33 p.m. UTC 
  GPIO bitbanged Wiegand controller requires definitions of GPIO
lines to be used on top of the common Wiegand properties. Wiegand
utilizes two such lines - D0(low data line) and D1(high data line).

Signed-off-by: Martin Zaťovič <m.zatovic1@gmail.com>
---
 .../bindings/wiegand/wiegand-gpio.yaml        | 51 +++++++++++++++++++
 MAINTAINERS                                   |  5 ++
 2 files changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml

Comments

Krzysztof Kozlowski Feb. 3, 2023, 7:22 a.m. UTC | #1 
On 02/02/2023 15:33, Martin Zaťovič wrote:
> GPIO bitbanged Wiegand controller requires definitions of GPIO
> lines to be used on top of the common Wiegand properties. Wiegand
> utilizes two such lines - D0(low data line) and D1(high data line).

Subject: drop second/last, redundant "bindings". The "documentation"
prefix is already stating that these are bindings.

You already got almost same comment with your v1.

> 
> Signed-off-by: Martin Zaťovič <m.zatovic1@gmail.com>
> ---
>  .../bindings/wiegand/wiegand-gpio.yaml        | 51 +++++++++++++++++++
>  MAINTAINERS                                   |  5 ++
>  2 files changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml
> 
> diff --git a/Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml b/Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml
> new file mode 100644
> index 000000000000..3af0b7e04b3a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/wiegand/wiegand-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: GPIO bitbanged Wiegand interface devicetree bindings

Drop "devicetree bindings"

You already got almost same comment with your v1.

> +
> +maintainers:
> +  - Martin Zaťovič <m.zatovic1@gmail.com>
> +
> +description:
> +  This represents the GPIO lines used for bit-banged Wiegand on dedicated GPIO
> +  lines.
> +
> +allOf:
> +  - $ref: "/schemas/wiegand/wiegand-controller.yaml#"

Drop quotes

> +
> +properties:
> +  compatible:
> +    const: wiegand-gpio
> +
> +  data-hi-gpios:
> +    description: GPIO used as Wiegands data-hi line.
> +    maxItems: 1
> +
> +  data-lo-gpios:
> +    description: GPIO used as Wiegands data-lo line.
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - data-hi-gpios
> +  - data-lo-gpios
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    wiegand@f00 {

Does not look like you tested the bindings. Please run `make
dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml b/Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml
new file mode 100644
index 000000000000..3af0b7e04b3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml
@@ -0,0 +1,51 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/wiegand/wiegand-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO bitbanged Wiegand interface devicetree bindings
+
+maintainers:
+  - Martin Zaťovič <m.zatovic1@gmail.com>
+
+description:
+  This represents the GPIO lines used for bit-banged Wiegand on dedicated GPIO
+  lines.
+
+allOf:
+  - $ref: "/schemas/wiegand/wiegand-controller.yaml#"
+
+properties:
+  compatible:
+    const: wiegand-gpio
+
+  data-hi-gpios:
+    description: GPIO used as Wiegands data-hi line.
+    maxItems: 1
+
+  data-lo-gpios:
+    description: GPIO used as Wiegands data-lo line.
+    maxItems: 1
+
+required:
+  - compatible
+  - data-hi-gpios
+  - data-lo-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    wiegand@f00 {
+        compatible = "wiegand-gpio";
+        pulse-len-us = <50>;
+        interval-len-us = <2000>;
+        frame-gap-us = <2000>;
+        data-lo-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+        data-hi-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+        /* devices */
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 8119d12dac41..54d61d95a1ba 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -22435,6 +22435,11 @@  F:	Documentation/devicetree/bindings/wiegand/wiegand-controller.yaml
 F:	drivers/wiegand/wiegand.c
 F:	include/linux/wiegand.h
 
+WIEGAND GPIO BITBANG DRIVER
+M:	Martin Zaťovič <m.zatovic1@gmail.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml
+
 WILOCITY WIL6210 WIRELESS DRIVER
 L:	linux-wireless@vger.kernel.org
 S:	Orphan