[v2] thermal: intel_powerclamp: Fix cur_state for multi package system

Message ID 20230201203941.2166530-1-srinivas.pandruvada@linux.intel.com
State New
Headers
Series [v2] thermal: intel_powerclamp: Fix cur_state for multi package system |

Commit Message

srinivas pandruvada Feb. 1, 2023, 8:39 p.m. UTC
  The powerclamp cooling device cur_state shows actual idle observed by
package C-state idle counters. But the implementation is not sufficient
for multi package or multi die system. The cur_state value is incorrect.
On these systems, these counters must be read from each package/die and
somehow aggregate them. But there is no good method for aggregation.

It was not a problem when explicit CPU model addition was required to
enable intel powerclamp. In this way certain CPU models could have
been avoided. But with the removal of CPU model check with the
availability of Package C-state counters, the driver is loaded on most
of the recent systems.

For multi package/die systems, just show the actual target idle state,
the system is trying to achieve. In powerclamp this is the user set
state minus one.

Also there is no use of starting a worker thread for polling package
C-state counters and applying any compensation for multiple package
or multiple die systems.

Fixes: b721ca0d1927 ("thermal/powerclamp: remove cpu whitelist")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org # 4.14+
---
v2:
Changed: (true == clamping) to (clamping)
Updated commit description for the last paragraph

 drivers/thermal/intel/intel_powerclamp.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)
  

Comments

Rafael J. Wysocki Feb. 2, 2023, 2:51 p.m. UTC | #1
On Wed, Feb 1, 2023 at 9:39 PM Srinivas Pandruvada
<srinivas.pandruvada@linux.intel.com> wrote:
>
> The powerclamp cooling device cur_state shows actual idle observed by
> package C-state idle counters. But the implementation is not sufficient
> for multi package or multi die system. The cur_state value is incorrect.
> On these systems, these counters must be read from each package/die and
> somehow aggregate them. But there is no good method for aggregation.
>
> It was not a problem when explicit CPU model addition was required to
> enable intel powerclamp. In this way certain CPU models could have
> been avoided. But with the removal of CPU model check with the
> availability of Package C-state counters, the driver is loaded on most
> of the recent systems.
>
> For multi package/die systems, just show the actual target idle state,
> the system is trying to achieve. In powerclamp this is the user set
> state minus one.
>
> Also there is no use of starting a worker thread for polling package
> C-state counters and applying any compensation for multiple package
> or multiple die systems.
>
> Fixes: b721ca0d1927 ("thermal/powerclamp: remove cpu whitelist")
> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
> Cc: stable@vger.kernel.org # 4.14+
> ---
> v2:
> Changed: (true == clamping) to (clamping)
> Updated commit description for the last paragraph
>
>  drivers/thermal/intel/intel_powerclamp.c | 20 ++++++++++++++++----
>  1 file changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/thermal/intel/intel_powerclamp.c b/drivers/thermal/intel/intel_powerclamp.c
> index b80e25ec1261..2f4cbfdf26a0 100644
> --- a/drivers/thermal/intel/intel_powerclamp.c
> +++ b/drivers/thermal/intel/intel_powerclamp.c
> @@ -57,6 +57,7 @@
>
>  static unsigned int target_mwait;
>  static struct dentry *debug_dir;
> +static bool poll_pkg_cstate_enable;
>
>  /* user selected target */
>  static unsigned int set_target_ratio;
> @@ -261,6 +262,9 @@ static unsigned int get_compensation(int ratio)
>  {
>         unsigned int comp = 0;
>
> +       if (!poll_pkg_cstate_enable)
> +               return 0;
> +
>         /* we only use compensation if all adjacent ones are good */
>         if (ratio == 1 &&
>                 cal_data[ratio].confidence >= CONFIDENCE_OK &&
> @@ -519,7 +523,8 @@ static int start_power_clamp(void)
>         control_cpu = cpumask_first(cpu_online_mask);
>
>         clamping = true;
> -       schedule_delayed_work(&poll_pkg_cstate_work, 0);
> +       if (poll_pkg_cstate_enable)
> +               schedule_delayed_work(&poll_pkg_cstate_work, 0);
>
>         /* start one kthread worker per online cpu */
>         for_each_online_cpu(cpu) {
> @@ -585,11 +590,15 @@ static int powerclamp_get_max_state(struct thermal_cooling_device *cdev,
>  static int powerclamp_get_cur_state(struct thermal_cooling_device *cdev,
>                                  unsigned long *state)
>  {
> -       if (true == clamping)
> -               *state = pkg_cstate_ratio_cur;
> -       else
> +       if (clamping) {
> +               if (poll_pkg_cstate_enable)
> +                       *state = pkg_cstate_ratio_cur;
> +               else
> +                       *state = set_target_ratio;
> +       } else {
>                 /* to save power, do not poll idle ratio while not clamping */
>                 *state = -1; /* indicates invalid state */
> +       }
>
>         return 0;
>  }
> @@ -712,6 +721,9 @@ static int __init powerclamp_init(void)
>                 goto exit_unregister;
>         }
>
> +       if (topology_max_packages() == 1 && topology_max_die_per_package() == 1)
> +               poll_pkg_cstate_enable = true;
> +
>         cooling_dev = thermal_cooling_device_register("intel_powerclamp", NULL,
>                                                 &powerclamp_cooling_ops);
>         if (IS_ERR(cooling_dev)) {
> --

Applied as 6.3 material, thanks!
  

Patch

diff --git a/drivers/thermal/intel/intel_powerclamp.c b/drivers/thermal/intel/intel_powerclamp.c
index b80e25ec1261..2f4cbfdf26a0 100644
--- a/drivers/thermal/intel/intel_powerclamp.c
+++ b/drivers/thermal/intel/intel_powerclamp.c
@@ -57,6 +57,7 @@ 
 
 static unsigned int target_mwait;
 static struct dentry *debug_dir;
+static bool poll_pkg_cstate_enable;
 
 /* user selected target */
 static unsigned int set_target_ratio;
@@ -261,6 +262,9 @@  static unsigned int get_compensation(int ratio)
 {
 	unsigned int comp = 0;
 
+	if (!poll_pkg_cstate_enable)
+		return 0;
+
 	/* we only use compensation if all adjacent ones are good */
 	if (ratio == 1 &&
 		cal_data[ratio].confidence >= CONFIDENCE_OK &&
@@ -519,7 +523,8 @@  static int start_power_clamp(void)
 	control_cpu = cpumask_first(cpu_online_mask);
 
 	clamping = true;
-	schedule_delayed_work(&poll_pkg_cstate_work, 0);
+	if (poll_pkg_cstate_enable)
+		schedule_delayed_work(&poll_pkg_cstate_work, 0);
 
 	/* start one kthread worker per online cpu */
 	for_each_online_cpu(cpu) {
@@ -585,11 +590,15 @@  static int powerclamp_get_max_state(struct thermal_cooling_device *cdev,
 static int powerclamp_get_cur_state(struct thermal_cooling_device *cdev,
 				 unsigned long *state)
 {
-	if (true == clamping)
-		*state = pkg_cstate_ratio_cur;
-	else
+	if (clamping) {
+		if (poll_pkg_cstate_enable)
+			*state = pkg_cstate_ratio_cur;
+		else
+			*state = set_target_ratio;
+	} else {
 		/* to save power, do not poll idle ratio while not clamping */
 		*state = -1; /* indicates invalid state */
+	}
 
 	return 0;
 }
@@ -712,6 +721,9 @@  static int __init powerclamp_init(void)
 		goto exit_unregister;
 	}
 
+	if (topology_max_packages() == 1 && topology_max_die_per_package() == 1)
+		poll_pkg_cstate_enable = true;
+
 	cooling_dev = thermal_cooling_device_register("intel_powerclamp", NULL,
 						&powerclamp_cooling_ops);
 	if (IS_ERR(cooling_dev)) {