diff mbox series

[v10,3/4] dt-bindings: input: pwm-beeper: add volume

Message ID 20230201152128.614439-4-manuel.traut@mt.com
State New
Headers
Series input: pwm-beeper: add feature to set volume level |

Commit Message

Manuel Traut Feb. 1, 2023, 3:21 p.m. UTC 
  Adds an array of supported volume levels and a default volume level.

Signed-off-by: Manuel Traut <manuel.traut@mt.com>
---
 .../devicetree/bindings/input/pwm-beeper.yaml   | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

Comments

Krzysztof Kozlowski Feb. 1, 2023, 4:15 p.m. UTC | #1 
On 01/02/2023 16:21, Manuel Traut wrote:
> Adds an array of supported volume levels and a default volume level.

Adds -> Add


> 
> Signed-off-by: Manuel Traut <manuel.traut@mt.com>
> ---
>  .../devicetree/bindings/input/pwm-beeper.yaml   | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 

Thank you for your patch. There is something to discuss/improve.

> diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.yaml b/Documentation/devicetree/bindings/input/pwm-beeper.yaml
> index 1ebc3a46d934..6599e28ba5e6 100644
> --- a/Documentation/devicetree/bindings/input/pwm-beeper.yaml
> +++ b/Documentation/devicetree/bindings/input/pwm-beeper.yaml
> @@ -25,6 +25,21 @@ properties:
>    beeper-hz:
>      description: bell frequency in Hz
>  
> +  volume-levels-bp:
> +    description: >
> +      Array of PWM duty cycle values that correspond to
> +      linear volume levels. These need to be in the range of
> +      0 to 5000, while 0 means 0% duty cycle (mute) and 5000
> +      means 50% duty cycle (max volume).

Is range 0-5000 limitation of the device? If so, this should not be
free-form text, but "maximum: 5000" (minimum is 0 anyway).

> +      Please note that the actual volume of most beepers is
> +      highly non-linear, which means that low volume levels
> +      are probably somewhere in the range of 10 to 300 (0.1-3%
> +      duty cycle).


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.yaml b/Documentation/devicetree/bindings/input/pwm-beeper.yaml
index 1ebc3a46d934..6599e28ba5e6 100644
--- a/Documentation/devicetree/bindings/input/pwm-beeper.yaml
+++ b/Documentation/devicetree/bindings/input/pwm-beeper.yaml
@@ -25,6 +25,21 @@  properties:
   beeper-hz:
     description: bell frequency in Hz
 
+  volume-levels-bp:
+    description: >
+      Array of PWM duty cycle values that correspond to
+      linear volume levels. These need to be in the range of
+      0 to 5000, while 0 means 0% duty cycle (mute) and 5000
+      means 50% duty cycle (max volume).
+      Please note that the actual volume of most beepers is
+      highly non-linear, which means that low volume levels
+      are probably somewhere in the range of 10 to 300 (0.1-3%
+      duty cycle).
+
+  default-volume-level-bp:
+    description: >
+      The default volume level.
+
 required:
   - compatible
   - pwms
@@ -36,4 +51,6 @@  examples:
     beeper {
       compatible = "pwm-beeper";
       pwms = <&pwm0>;
+      volume-levels-bp = <0 80 200 400 5000>;
+      default-volume-level-bp = <80>;
     };