diff mbox series

[v5,1/6] acpi: cppc: Add min and max perf reg writing support

Message ID 20230201065823.189828-2-wyes.karny@amd.com
State New
Headers
Series amd_pstate: Add guided autonomous mode support |

Commit Message

Wyes Karny Feb. 1, 2023, 6:58 a.m. UTC 
  Currently writing of min and max perf register is deferred in
cppc_set_perf function. In CPPC guided mode, these registers needed to
be written to guide the platform about min and max perf levels. Add this support
to make guided mode work properly on AMD shared memory systems.

Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
---
 drivers/acpi/cppc_acpi.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index 02d83c807271..91f9ef75f7de 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -1487,7 +1487,7 @@  EXPORT_SYMBOL_GPL(cppc_set_enable);
 int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
 {
 	struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
-	struct cpc_register_resource *desired_reg;
+	struct cpc_register_resource *desired_reg, *min_perf_reg, *max_perf_reg;
 	int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
 	struct cppc_pcc_data *pcc_ss_data = NULL;
 	int ret = 0;
@@ -1498,6 +1498,8 @@  int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
 	}
 
 	desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF];
+	min_perf_reg = &cpc_desc->cpc_regs[MIN_PERF];
+	max_perf_reg = &cpc_desc->cpc_regs[MAX_PERF];
 
 	/*
 	 * This is Phase-I where we want to write to CPC registers
@@ -1506,7 +1508,7 @@  int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
 	 * Since read_lock can be acquired by multiple CPUs simultaneously we
 	 * achieve that goal here
 	 */
-	if (CPC_IN_PCC(desired_reg)) {
+	if (CPC_IN_PCC(desired_reg) || CPC_IN_PCC(min_perf_reg) || CPC_IN_PCC(max_perf_reg)) {
 		if (pcc_ss_id < 0) {
 			pr_debug("Invalid pcc_ss_id\n");
 			return -ENODEV;
@@ -1529,13 +1531,19 @@  int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
 		cpc_desc->write_cmd_status = 0;
 	}
 
-	/*
-	 * Skip writing MIN/MAX until Linux knows how to come up with
-	 * useful values.
-	 */
 	cpc_write(cpu, desired_reg, perf_ctrls->desired_perf);
 
-	if (CPC_IN_PCC(desired_reg))
+	/**
+	 * Only write if min_perf and max_perf not zero. Some drivers pass zero
+	 * value to min and max perf, but they don't mean to set the zero value,
+	 * they just don't want to write to those registers.
+	 */
+	if (perf_ctrls->min_perf)
+		cpc_write(cpu, min_perf_reg, perf_ctrls->min_perf);
+	if (perf_ctrls->max_perf)
+		cpc_write(cpu, max_perf_reg, perf_ctrls->max_perf);
+
+	if (CPC_IN_PCC(desired_reg) || CPC_IN_PCC(min_perf_reg) || CPC_IN_PCC(max_perf_reg))
 		up_read(&pcc_ss_data->pcc_lock);	/* END Phase-I */
 	/*
 	 * This is Phase-II where we transfer the ownership of PCC to Platform
@@ -1583,7 +1591,7 @@  int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
 	 * case during a CMD_READ and if there are pending writes it delivers
 	 * the write command before servicing the read command
 	 */
-	if (CPC_IN_PCC(desired_reg)) {
+	if (CPC_IN_PCC(desired_reg) || CPC_IN_PCC(min_perf_reg) || CPC_IN_PCC(max_perf_reg)) {
 		if (down_write_trylock(&pcc_ss_data->pcc_lock)) {/* BEGIN Phase-II */
 			/* Update only if there are pending write commands */
 			if (pcc_ss_data->pending_pcc_write_cmd)