diff mbox series

[v4,8/8] clk: qcom: Add GPU clock controller driver for SM6115

Message ID 20230130235926.2419776-9-konrad.dybcio@linaro.org
State New
Headers
Series [v4,1/8] clk: qcom: branch: Add helper functions for setting retain bits |

Commit Message

Konrad Dybcio Jan. 30, 2023, 11:59 p.m. UTC 
  Add support for the GPU clock controller found on SM6115.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/clk/qcom/Kconfig        |   9 +
 drivers/clk/qcom/Makefile       |   1 +
 drivers/clk/qcom/gpucc-sm6115.c | 512 ++++++++++++++++++++++++++++++++
 3 files changed, 522 insertions(+)
 create mode 100644 drivers/clk/qcom/gpucc-sm6115.c

Comments

Dmitry Baryshkov Jan. 31, 2023, 9:25 a.m. UTC | #1 
On 31/01/2023 01:59, Konrad Dybcio wrote:
> Add support for the GPU clock controller found on SM6115.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   drivers/clk/qcom/Kconfig        |   9 +
>   drivers/clk/qcom/Makefile       |   1 +
>   drivers/clk/qcom/gpucc-sm6115.c | 512 ++++++++++++++++++++++++++++++++
>   3 files changed, 522 insertions(+)
>   create mode 100644 drivers/clk/qcom/gpucc-sm6115.c

[skipped]

> +static int gpu_cc_sm6115_probe(struct platform_device *pdev)
> +{
> +	struct regmap *regmap;
> +	unsigned int value, mask;
> +
> +	regmap = qcom_cc_map(pdev, &gpu_cc_sm6115_desc);
> +	if (IS_ERR(regmap))
> +		return PTR_ERR(regmap);
> +
> +	clk_alpha_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
> +	clk_alpha_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
> +
> +	/* Recommended WAKEUP/SLEEP settings for the gpu_cc_cx_gmu_clk */
> +	mask = CX_GMU_CBCR_WAKE_MASK << CX_GMU_CBCR_WAKE_SHIFT;
> +	mask |= CX_GMU_CBCR_SLEEP_MASK << CX_GMU_CBCR_SLEEP_SHIFT;
> +	value = 0xf << CX_GMU_CBCR_WAKE_SHIFT | 0xf << CX_GMU_CBCR_SLEEP_SHIFT;
> +	regmap_update_bits(regmap, gpu_cc_cx_gmu_clk.clkr.enable_reg, mask, value);
> +
> +	/* Set up PERIPH/MEM retain on the GPU core clock */
> +	regmap_update_bits(regmap, gpu_cc_gx_gfx3d_clk.halt_reg,
> +			   (BIT(14) | BIT(13)), (BIT(14) | BIT(13)));

But you have your new helpers to set these values, don't you?

> +
> +	return qcom_cc_really_probe(pdev, &gpu_cc_sm6115_desc, regmap);
> +}
> +
> +static struct platform_driver gpu_cc_sm6115_driver = {
> +	.probe = gpu_cc_sm6115_probe,
> +	.driver = {
> +		.name = "sm6115-gpucc",
> +		.of_match_table = gpu_cc_sm6115_match_table,
> +	},
> +};
> +module_platform_driver(gpu_cc_sm6115_driver);
> +
> +MODULE_DESCRIPTION("QTI GPU_CC SM6115 Driver");
> +MODULE_LICENSE("GPL");
Konrad Dybcio Jan. 31, 2023, 12:38 p.m. UTC | #2 
On 31.01.2023 10:25, Dmitry Baryshkov wrote:
> On 31/01/2023 01:59, Konrad Dybcio wrote:
>> Add support for the GPU clock controller found on SM6115.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>> ---
>>   drivers/clk/qcom/Kconfig        |   9 +
>>   drivers/clk/qcom/Makefile       |   1 +
>>   drivers/clk/qcom/gpucc-sm6115.c | 512 ++++++++++++++++++++++++++++++++
>>   3 files changed, 522 insertions(+)
>>   create mode 100644 drivers/clk/qcom/gpucc-sm6115.c
> 
> [skipped]
> 
>> +static int gpu_cc_sm6115_probe(struct platform_device *pdev)
>> +{
>> +    struct regmap *regmap;
>> +    unsigned int value, mask;
>> +
>> +    regmap = qcom_cc_map(pdev, &gpu_cc_sm6115_desc);
>> +    if (IS_ERR(regmap))
>> +        return PTR_ERR(regmap);
>> +
>> +    clk_alpha_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
>> +    clk_alpha_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
>> +
>> +    /* Recommended WAKEUP/SLEEP settings for the gpu_cc_cx_gmu_clk */
>> +    mask = CX_GMU_CBCR_WAKE_MASK << CX_GMU_CBCR_WAKE_SHIFT;
>> +    mask |= CX_GMU_CBCR_SLEEP_MASK << CX_GMU_CBCR_SLEEP_SHIFT;
>> +    value = 0xf << CX_GMU_CBCR_WAKE_SHIFT | 0xf << CX_GMU_CBCR_SLEEP_SHIFT;
>> +    regmap_update_bits(regmap, gpu_cc_cx_gmu_clk.clkr.enable_reg, mask, value);
>> +
>> +    /* Set up PERIPH/MEM retain on the GPU core clock */
>> +    regmap_update_bits(regmap, gpu_cc_gx_gfx3d_clk.halt_reg,
>> +               (BIT(14) | BIT(13)), (BIT(14) | BIT(13)));
> 
> But you have your new helpers to set these values, don't you?
Welp, that's what I get for managing 3 almost-identical drivers
at once ;) Will fix.

Konrad
> 
>> +
>> +    return qcom_cc_really_probe(pdev, &gpu_cc_sm6115_desc, regmap);
>> +}
>> +
>> +static struct platform_driver gpu_cc_sm6115_driver = {
>> +    .probe = gpu_cc_sm6115_probe,
>> +    .driver = {
>> +        .name = "sm6115-gpucc",
>> +        .of_match_table = gpu_cc_sm6115_match_table,
>> +    },
>> +};
>> +module_platform_driver(gpu_cc_sm6115_driver);
>> +
>> +MODULE_DESCRIPTION("QTI GPU_CC SM6115 Driver");
>> +MODULE_LICENSE("GPL");
>
diff mbox series

Patch

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index a5995ede04e9..825701084323 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -798,6 +798,15 @@  config SM_GCC_8550
 	  Say Y if you want to use peripheral devices such as UART,
 	  SPI, I2C, USB, SD/UFS, PCIe etc.
 
+config SM_GPUCC_6115
+	tristate "SM6125 Graphics Clock Controller"
+	select SM_GCC_6115
+	depends on ARM64 || COMPILE_TEST
+	help
+	  Support for the graphics clock controller on SM6115 devices.
+	  Say Y if you want to support graphics controller devices and
+	  functionality such as 3D graphics.
+
 config SM_GPUCC_6125
 	tristate "SM6125 Graphics Clock Controller"
 	select SM_GCC_6125
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 5a1b65b2ac05..9f6b93698ef2 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -112,6 +112,7 @@  obj-$(CONFIG_SM_GCC_8250) += gcc-sm8250.o
 obj-$(CONFIG_SM_GCC_8350) += gcc-sm8350.o
 obj-$(CONFIG_SM_GCC_8450) += gcc-sm8450.o
 obj-$(CONFIG_SM_GCC_8550) += gcc-sm8550.o
+obj-$(CONFIG_SM_GPUCC_6115) += gpucc-sm6115.o
 obj-$(CONFIG_SM_GPUCC_6125) += gpucc-sm6125.o
 obj-$(CONFIG_SM_GPUCC_6350) += gpucc-sm6350.o
 obj-$(CONFIG_SM_GPUCC_6375) += gpucc-sm6375.o
diff --git a/drivers/clk/qcom/gpucc-sm6115.c b/drivers/clk/qcom/gpucc-sm6115.c
new file mode 100644
index 000000000000..2f54298ed255
--- /dev/null
+++ b/drivers/clk/qcom/gpucc-sm6115.c
@@ -0,0 +1,512 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,sm6115-gpucc.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "clk-regmap-mux.h"
+#include "clk-regmap-phy-mux.h"
+#include "gdsc.h"
+#include "reset.h"
+
+#define CX_GMU_CBCR_SLEEP_MASK		0xf
+#define CX_GMU_CBCR_SLEEP_SHIFT		4
+#define CX_GMU_CBCR_WAKE_MASK		0xf
+#define CX_GMU_CBCR_WAKE_SHIFT		8
+
+enum {
+	DT_BI_TCXO,
+	DT_GCC_GPU_GPLL0_CLK_SRC,
+	DT_GCC_GPU_GPLL0_DIV_CLK_SRC,
+};
+
+enum {
+	P_BI_TCXO,
+	P_GPLL0_OUT_MAIN,
+	P_GPLL0_OUT_MAIN_DIV,
+	P_GPU_CC_PLL0_OUT_AUX2,
+	P_GPU_CC_PLL0_OUT_MAIN,
+	P_GPU_CC_PLL1_OUT_AUX,
+	P_GPU_CC_PLL1_OUT_MAIN,
+};
+
+static struct pll_vco default_vco[] = {
+	{ 1000000000, 2000000000, 0 },
+};
+
+static struct pll_vco pll1_vco[] = {
+	{ 500000000, 1000000000, 2 },
+};
+
+static const struct alpha_pll_config gpu_cc_pll0_config = {
+	.l = 0x3e,
+	.alpha = 0,
+	.alpha_hi = 0x80,
+	.vco_val = 0x0 << 20,
+	.vco_mask = GENMASK(21, 20),
+	.alpha_en_mask = BIT(24),
+	.main_output_mask = BIT(0),
+	.aux_output_mask = BIT(1),
+	.aux2_output_mask = BIT(2),
+	.config_ctl_val = 0x4001055b,
+	.test_ctl_hi1_val = 0x1,
+};
+
+/* 1200MHz configuration */
+static struct clk_alpha_pll gpu_cc_pll0 = {
+	.offset = 0x0,
+	.vco_table = default_vco,
+	.num_vco = ARRAY_SIZE(default_vco),
+	.flags = SUPPORTS_DYNAMIC_UPDATE,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_pll0",
+			.parent_data = &(const struct clk_parent_data){
+				.index = DT_BI_TCXO,
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_ops,
+		},
+	},
+};
+
+static const struct clk_div_table post_div_table_gpu_cc_pll0_out_aux2[] = {
+	{ 0x0, 1 },
+	{ }
+};
+
+static struct clk_alpha_pll_postdiv gpu_cc_pll0_out_aux2 = {
+	.offset = 0x0,
+	.post_div_shift = 8,
+	.post_div_table = post_div_table_gpu_cc_pll0_out_aux2,
+	.num_post_div = ARRAY_SIZE(post_div_table_gpu_cc_pll0_out_aux2),
+	.width = 4,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gpu_cc_pll0_out_aux2",
+		.parent_hws = (const struct clk_hw*[]) {
+			&gpu_cc_pll0.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_alpha_pll_postdiv_ops,
+	},
+};
+
+/* 640MHz configuration */
+static const struct alpha_pll_config gpu_cc_pll1_config = {
+	.l = 0x21,
+	.alpha = 0x55555555,
+	.alpha_hi = 0x55,
+	.alpha_en_mask = BIT(24),
+	.vco_val = 0x2 << 20,
+	.vco_mask = GENMASK(21, 20),
+	.main_output_mask = BIT(0),
+	.aux_output_mask = BIT(1),
+	.config_ctl_val = 0x4001055b,
+	.test_ctl_hi1_val = 0x1,
+};
+
+static struct clk_alpha_pll gpu_cc_pll1 = {
+	.offset = 0x100,
+	.vco_table = pll1_vco,
+	.num_vco = ARRAY_SIZE(pll1_vco),
+	.flags = SUPPORTS_DYNAMIC_UPDATE,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_pll1",
+			.parent_data = &(const struct clk_parent_data){
+				.index = DT_BI_TCXO,
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_ops,
+		},
+	},
+};
+
+static const struct clk_div_table post_div_table_gpu_cc_pll1_out_aux[] = {
+	{ 0x0, 1 },
+	{ }
+};
+
+static struct clk_alpha_pll_postdiv gpu_cc_pll1_out_aux = {
+	.offset = 0x100,
+	.post_div_shift = 15,
+	.post_div_table = post_div_table_gpu_cc_pll1_out_aux,
+	.num_post_div = ARRAY_SIZE(post_div_table_gpu_cc_pll1_out_aux),
+	.width = 3,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gpu_cc_pll1_out_aux",
+		.parent_hws = (const struct clk_hw*[]) {
+			&gpu_cc_pll1.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_alpha_pll_postdiv_ops,
+	},
+};
+
+static const struct parent_map gpu_cc_parent_map_0[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPU_CC_PLL0_OUT_MAIN, 1 },
+	{ P_GPU_CC_PLL1_OUT_MAIN, 3 },
+	{ P_GPLL0_OUT_MAIN, 5 },
+	{ P_GPLL0_OUT_MAIN_DIV, 6 },
+};
+
+static const struct clk_parent_data gpu_cc_parent_data_0[] = {
+	{ .index = P_BI_TCXO },
+	{ .hw = &gpu_cc_pll0.clkr.hw },
+	{ .hw = &gpu_cc_pll1.clkr.hw },
+	{ .index = DT_GCC_GPU_GPLL0_CLK_SRC },
+	{ .index = DT_GCC_GPU_GPLL0_DIV_CLK_SRC },
+};
+
+static const struct parent_map gpu_cc_parent_map_1[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPU_CC_PLL0_OUT_AUX2, 2 },
+	{ P_GPU_CC_PLL1_OUT_AUX, 3 },
+	{ P_GPLL0_OUT_MAIN, 5 },
+};
+
+static const struct clk_parent_data gpu_cc_parent_data_1[] = {
+	{ .index = P_BI_TCXO },
+	{ .hw = &gpu_cc_pll0_out_aux2.clkr.hw },
+	{ .hw = &gpu_cc_pll1_out_aux.clkr.hw },
+	{ .index = DT_GCC_GPU_GPLL0_CLK_SRC },
+};
+
+static const struct freq_tbl ftbl_gpu_cc_gmu_clk_src[] = {
+	F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gpu_cc_gmu_clk_src = {
+	.cmd_rcgr = 0x1120,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gpu_cc_parent_map_0,
+	.freq_tbl = ftbl_gpu_cc_gmu_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gpu_cc_gmu_clk_src",
+		.parent_data = gpu_cc_parent_data_0,
+		.num_parents = ARRAY_SIZE(gpu_cc_parent_data_0),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gpu_cc_gx_gfx3d_clk_src[] = {
+	F(320000000, P_GPU_CC_PLL1_OUT_AUX, 2, 0, 0),
+	F(465000000, P_GPU_CC_PLL1_OUT_AUX, 2, 0, 0),
+	F(600000000, P_GPU_CC_PLL0_OUT_AUX2, 2, 0, 0),
+	F(745000000, P_GPU_CC_PLL0_OUT_AUX2, 2, 0, 0),
+	F(820000000, P_GPU_CC_PLL0_OUT_AUX2, 2, 0, 0),
+	F(900000000, P_GPU_CC_PLL0_OUT_AUX2, 2, 0, 0),
+	F(950000000, P_GPU_CC_PLL0_OUT_AUX2, 2, 0, 0),
+	F(980000000, P_GPU_CC_PLL0_OUT_AUX2, 2, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gpu_cc_gx_gfx3d_clk_src = {
+	.cmd_rcgr = 0x101c,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gpu_cc_parent_map_1,
+	.freq_tbl = ftbl_gpu_cc_gx_gfx3d_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gpu_cc_gx_gfx3d_clk_src",
+		.parent_data = gpu_cc_parent_data_1,
+		.num_parents = ARRAY_SIZE(gpu_cc_parent_data_1),
+		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_branch gpu_cc_ahb_clk = {
+	.halt_reg = 0x1078,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x1078,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_ahb_clk",
+			.flags = CLK_IS_CRITICAL,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_crc_ahb_clk = {
+	.halt_reg = 0x107c,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x107c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_crc_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cx_gfx3d_clk = {
+	.halt_reg = 0x10a4,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x10a4,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cx_gfx3d_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gpu_cc_gx_gfx3d_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cx_gmu_clk = {
+	.halt_reg = 0x1098,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1098,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cx_gmu_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gpu_cc_gmu_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cx_snoc_dvm_clk = {
+	.halt_reg = 0x108c,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x108c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cx_snoc_dvm_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cxo_aon_clk = {
+	.halt_reg = 0x1004,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x1004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cxo_aon_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cxo_clk = {
+	.halt_reg = 0x109c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x109c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cxo_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_gx_cxo_clk = {
+	.halt_reg = 0x1060,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x1060,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_gx_cxo_clk",
+			.flags = CLK_IS_CRITICAL,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_gx_gfx3d_clk = {
+	.halt_reg = 0x1054,
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x1054,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_gx_gfx3d_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gpu_cc_gx_gfx3d_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_sleep_clk = {
+	.halt_reg = 0x1090,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x1090,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_sleep_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_hlos1_vote_gpu_smmu_clk = {
+	.halt_reg = 0x5000,
+	.halt_check = BRANCH_VOTED,
+	.clkr = {
+		.enable_reg = 0x5000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			 .name = "gpu_cc_hlos1_vote_gpu_smmu_clk",
+			 .ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct gdsc gpu_cx_gdsc = {
+	.gdscr = 0x106c,
+	.gds_hw_ctrl = 0x1540,
+	.pd = {
+		.name = "gpu_cx_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = VOTABLE,
+};
+
+static struct gdsc gpu_gx_gdsc = {
+	.gdscr = 0x100c,
+	.clamp_io_ctrl = 0x1508,
+	.resets = (unsigned int []){ GPU_GX_BCR },
+	.reset_count = 1,
+	.pd = {
+		.name = "gpu_gx_gdsc",
+	},
+	.parent = &gpu_cx_gdsc.pd,
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = CLAMP_IO | SW_RESET | VOTABLE,
+};
+
+static struct clk_regmap *gpu_cc_sm6115_clocks[] = {
+	[GPU_CC_AHB_CLK] = &gpu_cc_ahb_clk.clkr,
+	[GPU_CC_CRC_AHB_CLK] = &gpu_cc_crc_ahb_clk.clkr,
+	[GPU_CC_CX_GFX3D_CLK] = &gpu_cc_cx_gfx3d_clk.clkr,
+	[GPU_CC_CX_GMU_CLK] = &gpu_cc_cx_gmu_clk.clkr,
+	[GPU_CC_CX_SNOC_DVM_CLK] = &gpu_cc_cx_snoc_dvm_clk.clkr,
+	[GPU_CC_CXO_AON_CLK] = &gpu_cc_cxo_aon_clk.clkr,
+	[GPU_CC_CXO_CLK] = &gpu_cc_cxo_clk.clkr,
+	[GPU_CC_GMU_CLK_SRC] = &gpu_cc_gmu_clk_src.clkr,
+	[GPU_CC_GX_CXO_CLK] = &gpu_cc_gx_cxo_clk.clkr,
+	[GPU_CC_GX_GFX3D_CLK] = &gpu_cc_gx_gfx3d_clk.clkr,
+	[GPU_CC_GX_GFX3D_CLK_SRC] = &gpu_cc_gx_gfx3d_clk_src.clkr,
+	[GPU_CC_PLL0] = &gpu_cc_pll0.clkr,
+	[GPU_CC_PLL0_OUT_AUX2] = &gpu_cc_pll0_out_aux2.clkr,
+	[GPU_CC_PLL1] = &gpu_cc_pll1.clkr,
+	[GPU_CC_PLL1_OUT_AUX] = &gpu_cc_pll1_out_aux.clkr,
+	[GPU_CC_SLEEP_CLK] = &gpu_cc_sleep_clk.clkr,
+	[GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK] = &gpu_cc_hlos1_vote_gpu_smmu_clk.clkr,
+};
+
+static const struct qcom_reset_map gpu_cc_sm6115_resets[] = {
+	[GPU_GX_BCR] = { 0x1008 },
+};
+
+static struct gdsc *gpu_cc_sm6115_gdscs[] = {
+	[GPU_CX_GDSC] = &gpu_cx_gdsc,
+	[GPU_GX_GDSC] = &gpu_gx_gdsc,
+};
+
+static const struct regmap_config gpu_cc_sm6115_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = 0x9000,
+	.fast_io = true,
+};
+
+static const struct qcom_cc_desc gpu_cc_sm6115_desc = {
+	.config = &gpu_cc_sm6115_regmap_config,
+	.clks = gpu_cc_sm6115_clocks,
+	.num_clks = ARRAY_SIZE(gpu_cc_sm6115_clocks),
+	.resets = gpu_cc_sm6115_resets,
+	.num_resets = ARRAY_SIZE(gpu_cc_sm6115_resets),
+	.gdscs = gpu_cc_sm6115_gdscs,
+	.num_gdscs = ARRAY_SIZE(gpu_cc_sm6115_gdscs),
+};
+
+static const struct of_device_id gpu_cc_sm6115_match_table[] = {
+	{ .compatible = "qcom,sm6115-gpucc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gpu_cc_sm6115_match_table);
+
+static int gpu_cc_sm6115_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+	unsigned int value, mask;
+
+	regmap = qcom_cc_map(pdev, &gpu_cc_sm6115_desc);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	clk_alpha_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
+	clk_alpha_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
+
+	/* Recommended WAKEUP/SLEEP settings for the gpu_cc_cx_gmu_clk */
+	mask = CX_GMU_CBCR_WAKE_MASK << CX_GMU_CBCR_WAKE_SHIFT;
+	mask |= CX_GMU_CBCR_SLEEP_MASK << CX_GMU_CBCR_SLEEP_SHIFT;
+	value = 0xf << CX_GMU_CBCR_WAKE_SHIFT | 0xf << CX_GMU_CBCR_SLEEP_SHIFT;
+	regmap_update_bits(regmap, gpu_cc_cx_gmu_clk.clkr.enable_reg, mask, value);
+
+	/* Set up PERIPH/MEM retain on the GPU core clock */
+	regmap_update_bits(regmap, gpu_cc_gx_gfx3d_clk.halt_reg,
+			   (BIT(14) | BIT(13)), (BIT(14) | BIT(13)));
+
+	return qcom_cc_really_probe(pdev, &gpu_cc_sm6115_desc, regmap);
+}
+
+static struct platform_driver gpu_cc_sm6115_driver = {
+	.probe = gpu_cc_sm6115_probe,
+	.driver = {
+		.name = "sm6115-gpucc",
+		.of_match_table = gpu_cc_sm6115_match_table,
+	},
+};
+module_platform_driver(gpu_cc_sm6115_driver);
+
+MODULE_DESCRIPTION("QTI GPU_CC SM6115 Driver");
+MODULE_LICENSE("GPL");