arm64: dts: qcom: sm6115: Add remoteproc nodes

  Add the adsp, cdsp and modem remoteproc nodes to sm6115.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
- Depends on the dt-binding and driver change submitted via [1].
[1]. https://lore.kernel.org/linux-arm-msm/20230128053504.2099620-1-bhupesh.sharma@linaro.org

 arch/arm64/boot/dts/qcom/sm6115.dtsi | 184 +++++++++++++++++++++++++++
 1 file changed, 184 insertions(+)
  

Hi Bjorn,

On 1/28/23 11:12 AM, Bhupesh Sharma wrote:
> Add the adsp, cdsp and modem remoteproc nodes to sm6115.
> 
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
> - Depends on the dt-binding and driver change submitted via [1].
> [1]. https://lore.kernel.org/linux-arm-msm/20230128053504.2099620-1-bhupesh.sharma@linaro.org

Gentle Ping. Since the dependencies (dt-bindings and driver changes) 
have already been merged into linux-next, this patch can now be applied.

Thanks,
Bhupesh

>   arch/arm64/boot/dts/qcom/sm6115.dtsi | 184 +++++++++++++++++++++++++++
>   1 file changed, 184 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 3c66f998a81b..3540cd24af5c 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -1309,6 +1309,39 @@ dispcc: clock-controller@5f00000 {
>   			#power-domain-cells = <1>;
>   		};
>   
> +		remoteproc_mpss: remoteproc@6080000 {
> +			compatible = "qcom,sm6115-mpss-pas";
> +			reg = <0x06080000 0x100>;
> +
> +			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
> +					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> +					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> +			interrupt-names = "wdog", "fatal", "ready", "handover",
> +					  "stop-ack", "shutdown-ack";
> +
> +			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
> +			clock-names = "xo";
> +
> +			power-domains = <&rpmpd SM6115_VDDCX>;
> +
> +			memory-region = <&pil_modem_mem>;
> +
> +			qcom,smem-states = <&modem_smp2p_out 0>;
> +			qcom,smem-state-names = "stop";
> +
> +			status = "disabled";
> +
> +			glink-edge {
> +				interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
> +				label = "mpss";
> +				qcom,remote-pid = <1>;
> +				mboxes = <&apcs_glb 12>;
> +			};
> +		};
> +
>   		stm@8002000 {
>   			compatible = "arm,coresight-stm", "arm,primecell";
>   			reg = <0x08002000 0x1000>,
> @@ -1921,6 +1954,157 @@ funnel_apss1_in: endpoint {
>   			};
>   		};
>   
> +		remoteproc_adsp: remoteproc@ab00000 {
> +			compatible = "qcom,sm6115-adsp-pas";
> +			reg = <0x0ab00000 0x100>;
> +
> +			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
> +					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> +			interrupt-names = "wdog", "fatal", "ready",
> +					  "handover", "stop-ack";
> +
> +			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
> +			clock-names = "xo";
> +
> +			power-domains = <&rpmpd SM6115_VDD_LPI_CX>,
> +					<&rpmpd SM6115_VDD_LPI_MX>;
> +
> +			memory-region = <&pil_adsp_mem>;
> +
> +			qcom,smem-states = <&adsp_smp2p_out 0>;
> +			qcom,smem-state-names = "stop";
> +
> +			status = "disabled";
> +
> +			glink-edge {
> +				interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
> +				label = "lpass";
> +				qcom,remote-pid = <2>;
> +				mboxes = <&apcs_glb 8>;
> +
> +				fastrpc {
> +					compatible = "qcom,fastrpc";
> +					qcom,glink-channels = "fastrpcglink-apps-dsp";
> +					label = "adsp";
> +					qcom,non-secure-domain;
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					compute-cb@3 {
> +						compatible = "qcom,fastrpc-compute-cb";
> +						reg = <3>;
> +						iommus = <&apps_smmu 0x01c3 0x0>;
> +					};
> +
> +					compute-cb@4 {
> +						compatible = "qcom,fastrpc-compute-cb";
> +						reg = <4>;
> +						iommus = <&apps_smmu 0x01c4 0x0>;
> +					};
> +
> +					compute-cb@5 {
> +						compatible = "qcom,fastrpc-compute-cb";
> +						reg = <5>;
> +						iommus = <&apps_smmu 0x01c5 0x0>;
> +					};
> +
> +					compute-cb@6 {
> +						compatible = "qcom,fastrpc-compute-cb";
> +						reg = <6>;
> +						iommus = <&apps_smmu 0x01c6 0x0>;
> +					};
> +
> +					compute-cb@7 {
> +						compatible = "qcom,fastrpc-compute-cb";
> +						reg = <7>;
> +						iommus = <&apps_smmu 0x01c7 0x0>;
> +					};
> +				};
> +			};
> +		};
> +
> +		remoteproc_cdsp: remoteproc@b300000 {
> +			compatible = "qcom,sm6115-cdsp-pas";
> +			reg = <0x0b300000 0x100000>;
> +
> +			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
> +					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> +			interrupt-names = "wdog", "fatal", "ready",
> +					  "handover", "stop-ack";
> +
> +			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
> +			clock-names = "xo";
> +
> +			power-domains = <&rpmpd SM6115_VDDCX>;
> +
> +			memory-region = <&pil_cdsp_mem>;
> +
> +			qcom,smem-states = <&cdsp_smp2p_out 0>;
> +			qcom,smem-state-names = "stop";
> +
> +			status = "disabled";
> +
> +			glink-edge {
> +				interrupts = <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>;
> +				label = "cdsp";
> +				qcom,remote-pid = <5>;
> +				mboxes = <&apcs_glb 28>;
> +
> +				fastrpc {
> +					compatible = "qcom,fastrpc";
> +					qcom,glink-channels = "fastrpcglink-apps-dsp";
> +					label = "cdsp";
> +					qcom,non-secure-domain;
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					compute-cb@1 {
> +						compatible = "qcom,fastrpc-compute-cb";
> +						reg = <1>;
> +						iommus = <&apps_smmu 0x0c01 0x0>;
> +					};
> +
> +					compute-cb@2 {
> +						compatible = "qcom,fastrpc-compute-cb";
> +						reg = <2>;
> +						iommus = <&apps_smmu 0x0c02 0x0>;
> +					};
> +
> +					compute-cb@3 {
> +						compatible = "qcom,fastrpc-compute-cb";
> +						reg = <3>;
> +						iommus = <&apps_smmu 0x0c03 0x0>;
> +					};
> +
> +					compute-cb@4 {
> +						compatible = "qcom,fastrpc-compute-cb";
> +						reg = <4>;
> +						iommus = <&apps_smmu 0x0c04 0x0>;
> +					};
> +
> +					compute-cb@5 {
> +						compatible = "qcom,fastrpc-compute-cb";
> +						reg = <5>;
> +						iommus = <&apps_smmu 0x0c05 0x0>;
> +					};
> +
> +					compute-cb@6 {
> +						compatible = "qcom,fastrpc-compute-cb";
> +						reg = <6>;
> +						iommus = <&apps_smmu 0x0c06 0x0>;
> +					};
> +
> +					/* note: secure cb9 in downstream */
> +				};
> +			};
> +		};
> +
>   		apps_smmu: iommu@c600000 {
>   			compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500";
>   			reg = <0x0c600000 0x80000>;
  

On 13.03.2023 21:58, Bhupesh Sharma wrote:
> Hi Bjorn,
> 
> On 1/28/23 11:12 AM, Bhupesh Sharma wrote:
>> Add the adsp, cdsp and modem remoteproc nodes to sm6115.
>>
>> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
>> ---
>> - Depends on the dt-binding and driver change submitted via [1].
>> [1]. https://lore.kernel.org/linux-arm-msm/20230128053504.2099620-1-bhupesh.sharma@linaro.org
> 
> Gentle Ping. Since the dependencies (dt-bindings and driver changes) have already been merged into linux-next, this patch can now be applied.
Not really, it won't apply as-is. I suggest applying the version below
which was rebased, the reg was adjusted for 64bit addressing and the
-names were turned into vertical lists, I've been carrying it downstream
for a while and can confirm it works - I even got Wi-Fi up on the Tab P11!

https://github.com/SoMainline/linux/commit/a34e0bf410318b573820254bd241fef0ea013ea1.patch

(this is a git am-able plaintext patchfile)


Konrad
  

On 3/14/23 2:33 AM, Konrad Dybcio wrote:
> 
> 
> On 13.03.2023 21:58, Bhupesh Sharma wrote:
>> Hi Bjorn,
>>
>> On 1/28/23 11:12 AM, Bhupesh Sharma wrote:
>>> Add the adsp, cdsp and modem remoteproc nodes to sm6115.
>>>
>>> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
>>> ---
>>> - Depends on the dt-binding and driver change submitted via [1].
>>> [1]. https://lore.kernel.org/linux-arm-msm/20230128053504.2099620-1-bhupesh.sharma@linaro.org
>>
>> Gentle Ping. Since the dependencies (dt-bindings and driver changes) have already been merged into linux-next, this patch can now be applied.
> Not really, it won't apply as-is. I suggest applying the version below
> which was rebased, the reg was adjusted for 64bit addressing and the
> -names were turned into vertical lists, I've been carrying it downstream
> for a while and can confirm it works - I even got Wi-Fi up on the Tab P11!
> 
> https://github.com/SoMainline/linux/commit/a34e0bf410318b573820254bd241fef0ea013ea1.patch
> 
> (this is a git am-able plaintext patchfile)

Please send out your version for review, without which remoteproc is 
currently not functional on SM6115 / SM4250 SoC based boards.

Thanks,
Bhupesh
  

On Sat, 28 Jan 2023 11:12:56 +0530, Bhupesh Sharma wrote:
> Add the adsp, cdsp and modem remoteproc nodes to sm6115.
> 
> 

Applied, thanks!

[1/1] arm64: dts: qcom: sm6115: Add remoteproc nodes
      commit: 96ce9227fdbcfe32265ffb2803bfbbfa692cb445

Best regards,