scsi: aacraid: Allocate cmd_priv with scsicmd

  The aac_priv() helper assumes that the private cmd area immediately
follows struct scsi_cmnd. Allocate this space as part of scsicmd,
else there is a risk of heap overflow. Seen with GCC 13:

../drivers/scsi/aacraid/aachba.c: In function 'aac_probe_container':
../drivers/scsi/aacraid/aachba.c:841:26: warning: array subscript 16 is outside array bounds of 'void[392]' [-Warray-bounds=]
  841 |         status = cmd_priv->status;
      |                          ^~
In file included from ../include/linux/resource_ext.h:11,
                 from ../include/linux/pci.h:40,
                 from ../drivers/scsi/aacraid/aachba.c:22:
In function 'kmalloc',
    inlined from 'kzalloc' at ../include/linux/slab.h:720:9,
    inlined from 'aac_probe_container' at ../drivers/scsi/aacraid/aachba.c:821:30:
../include/linux/slab.h:580:24: note: at offset 392 into object of size 392 allocated by 'kmalloc_trace'
  580 |                 return kmalloc_trace(
      |                        ^~~~~~~~~~~~~~
  581 |                                 kmalloc_caches[kmalloc_type(flags)][index],
      |                                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  582 |                                 flags, size);
      |                                 ~~~~~~~~~~~~

Fixes: 76a3451b64c6 ("scsi: aacraid: Move the SCSI pointer to private command data")
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
---
 drivers/scsi/aacraid/aachba.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
  

Just a couple of observations.

On 1/28/23 01:04, Kees Cook wrote:
> The aac_priv() helper assumes that the private cmd area immediately
> follows struct scsi_cmnd. Allocate this space as part of scsicmd,
> else there is a risk of heap overflow. Seen with GCC 13:
> 
> ../drivers/scsi/aacraid/aachba.c: In function 'aac_probe_container':
> ../drivers/scsi/aacraid/aachba.c:841:26: warning: array subscript 16 is outside array bounds of 'void[392]' [-Warray-bounds=]

An object of size 392 would get allocated with size 512 (at least by
SLUB, AFAICT), so the risk of something going terribly wrong is probably
fairly small. Not that it shouldn't be fixed, of course...

KASAN should have caught this too, right? Does this mean nobody's tried
this driver with KASAN, or is this some kind of rare code path? (Just
asking for my own understanding.)

>   int aac_probe_container(struct aac_dev *dev, int cid)
>   {
> -	struct scsi_cmnd *scsicmd = kzalloc(sizeof(*scsicmd), GFP_KERNEL);
> -	struct aac_cmd_priv *cmd_priv = aac_priv(scsicmd);
> +	struct aac_cmd_priv *cmd_priv;
> +	struct scsi_cmnd *scsicmd = kzalloc(sizeof(*scsicmd) + sizeof(*cmd_priv), GFP_KERNEL);
>   	struct scsi_device *scsidev = kzalloc(sizeof(*scsidev), GFP_KERNEL);
>   	int status;
>   
> @@ -838,6 +838,7 @@ int aac_probe_container(struct aac_dev *dev, int cid)
>   		while (scsicmd->device == scsidev)
>   			schedule();
>   	kfree(scsidev);
> +	cmd_priv = aac_priv(scsicmd);
>   	status = cmd_priv->status;
>   	kfree(scsicmd);
>   	return status;

aac_priv() uses scsi_cmd_priv() which has the comment:

/*
  * Return the driver private allocation behind the command.
  * Only works if cmd_size is set in the host template.
  */

This is set for this driver:

static struct scsi_host_template aac_driver_template = {
[...]
    .cmd_size                       = sizeof(struct aac_cmd_priv),

I looked around to see if there was some kind of "allocate cmd" helper,
but couldn't find it -- scsi_ioctl_reset() allocates one (together with
struct request) and there are a few uses of ->cmd_size in
drivers/scsi/scsi_lib.c but there doesn't seem to be a common code path
for this.

I guess you could use dev->host->hostt->cmd_size or something, but that
doesn't seem worth it since this is driver specific and we already know
what the correct value should be.

FWIW:

Reviewed-by: Vegard Nossum <vegard.nossum@oracle.com>


Vegard
  

On 1/28/23 01:04, Kees Cook wrote:
> The aac_priv() helper assumes that the private cmd area immediately
> follows struct scsi_cmnd. Allocate this space as part of scsicmd,
> else there is a risk of heap overflow. Seen with GCC 13:
> 
> ../drivers/scsi/aacraid/aachba.c: In function 'aac_probe_container':
> ../drivers/scsi/aacraid/aachba.c:841:26: warning: array subscript 16 is outside array bounds of 'void[392]' [-Warray-bounds=]
>    841 |         status = cmd_priv->status;
>        |                          ^~
> In file included from ../include/linux/resource_ext.h:11,
>                   from ../include/linux/pci.h:40,
>                   from ../drivers/scsi/aacraid/aachba.c:22:
> In function 'kmalloc',
>      inlined from 'kzalloc' at ../include/linux/slab.h:720:9,
>      inlined from 'aac_probe_container' at ../drivers/scsi/aacraid/aachba.c:821:30:
> ../include/linux/slab.h:580:24: note: at offset 392 into object of size 392 allocated by 'kmalloc_trace'
>    580 |                 return kmalloc_trace(
>        |                        ^~~~~~~~~~~~~~
>    581 |                                 kmalloc_caches[kmalloc_type(flags)][index],
>        |                                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>    582 |                                 flags, size);
>        |                                 ~~~~~~~~~~~~
> 
> Fixes: 76a3451b64c6 ("scsi: aacraid: Move the SCSI pointer to private command data")
> Cc: Bart Van Assche <bvanassche@acm.org>
> Cc: Hannes Reinecke <hare@suse.de>
> Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
> Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
> Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
> Cc: linux-scsi@vger.kernel.org
> Cc: stable@vger.kernel.org
> Signed-off-by: Kees Cook <keescook@chromium.org>
> ---
>   drivers/scsi/aacraid/aachba.c | 5 +++--
>   1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
> index 4d4cb47b3846..24c049eff157 100644
> --- a/drivers/scsi/aacraid/aachba.c
> +++ b/drivers/scsi/aacraid/aachba.c
> @@ -818,8 +818,8 @@ static void aac_probe_container_scsi_done(struct scsi_cmnd *scsi_cmnd)
>   
>   int aac_probe_container(struct aac_dev *dev, int cid)
>   {
> -	struct scsi_cmnd *scsicmd = kzalloc(sizeof(*scsicmd), GFP_KERNEL);
> -	struct aac_cmd_priv *cmd_priv = aac_priv(scsicmd);
> +	struct aac_cmd_priv *cmd_priv;
> +	struct scsi_cmnd *scsicmd = kzalloc(sizeof(*scsicmd) + sizeof(*cmd_priv), GFP_KERNEL);
>   	struct scsi_device *scsidev = kzalloc(sizeof(*scsidev), GFP_KERNEL);
>   	int status;
>   
> @@ -838,6 +838,7 @@ int aac_probe_container(struct aac_dev *dev, int cid)
>   		while (scsicmd->device == scsidev)
>   			schedule();
>   	kfree(scsidev);
> +	cmd_priv = aac_priv(scsicmd);
>   	status = cmd_priv->status;
>   	kfree(scsicmd);
>   	return status;
Reviewed-by: Hannes Reinecke <hare@suse.de>

Cheers,

Hannes
  

On 1/27/23 16:04, Kees Cook wrote:
> The aac_priv() helper assumes that the private cmd area immediately
> follows struct scsi_cmnd. Allocate this space as part of scsicmd,
> else there is a risk of heap overflow. Seen with GCC 13: [ ... ]

Bart Van Assche <bvanassche@acm.org>
  

On 28/01/2023 18:40, Vegard Nossum wrote:
> aac_priv() uses scsi_cmd_priv() which has the comment:
> 
> /*
>   * Return the driver private allocation behind the command.
>   * Only works if cmd_size is set in the host template.
>   */
> 
> This is set for this driver:
> 
> static struct scsi_host_template aac_driver_template = {
> [...]
>     .cmd_size                       = sizeof(struct aac_cmd_priv),
> 
> I looked around to see if there was some kind of "allocate cmd" helper,
> but couldn't find it -- scsi_ioctl_reset() allocates one (together with
> struct request) and there are a few uses of ->cmd_size in
> drivers/scsi/scsi_lib.c but there doesn't seem to be a common code path
> for this.
> 
> I guess you could use dev->host->hostt->cmd_size or something, but that
> doesn't seem worth it since this is driver specific and we already know
> what the correct value should be.

How this driver allocates a SCSI cmd in this fashion is not proper, and 
hostt->cmd_size would only apply when the SCSI command is allocated in 
the proper fashion, that being as a request - __scsi_execute() -> 
scsi_alloc_request() being an example.

Hannes did have a conversion for this driver to allocate a request in
https://urldefense.com/v3/__https://lore.kernel.org/linux-scsi/8efc0e24-3000-39d9-7676-e0896145f247@suse.de/__;!!ACWV5N9M2RV99hQ!MealB8BN3q8cxYSaB7yKEbHyDmFTNl0YNVQXpVw8Zd0-iNqQ-k4IFxnqONpixfavb0DqGWnkbDVjBJCE22mYq5Ly8Xs$ 
- hopefully we can progress that work at some stage.

Thanks,
John
  

Kees,

> The aac_priv() helper assumes that the private cmd area immediately
> follows struct scsi_cmnd. Allocate this space as part of scsicmd, else
> there is a risk of heap overflow. Seen with GCC 13:

Applied to 6.3/scsi-staging, thanks!
  

On Fri, 27 Jan 2023 16:04:13 -0800, Kees Cook wrote:

> The aac_priv() helper assumes that the private cmd area immediately
> follows struct scsi_cmnd. Allocate this space as part of scsicmd,
> else there is a risk of heap overflow. Seen with GCC 13:
> 
> ../drivers/scsi/aacraid/aachba.c: In function 'aac_probe_container':
> ../drivers/scsi/aacraid/aachba.c:841:26: warning: array subscript 16 is outside array bounds of 'void[392]' [-Warray-bounds=]
>   841 |         status = cmd_priv->status;
>       |                          ^~
> In file included from ../include/linux/resource_ext.h:11,
>                  from ../include/linux/pci.h:40,
>                  from ../drivers/scsi/aacraid/aachba.c:22:
> In function 'kmalloc',
>     inlined from 'kzalloc' at ../include/linux/slab.h:720:9,
>     inlined from 'aac_probe_container' at ../drivers/scsi/aacraid/aachba.c:821:30:
> ../include/linux/slab.h:580:24: note: at offset 392 into object of size 392 allocated by 'kmalloc_trace'
>   580 |                 return kmalloc_trace(
>       |                        ^~~~~~~~~~~~~~
>   581 |                                 kmalloc_caches[kmalloc_type(flags)][index],
>       |                                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>   582 |                                 flags, size);
>       |                                 ~~~~~~~~~~~~
> 
> [...]

Applied to 6.3/scsi-queue, thanks!

[1/1] scsi: aacraid: Allocate cmd_priv with scsicmd
      https://git.kernel.org/mkp/scsi/c/7ab734fc7598