[v2,1/7] gpiolib: remove empty asm/gpio.h files

Message ID 20230127101149.3475929-2-arnd@kernel.org
State New
Headers
Series gpiolib cleanups |

Commit Message

Arnd Bergmann Jan. 27, 2023, 10:11 a.m. UTC
  From: Arnd Bergmann <arnd@arndb.de>

The arm and sh versions of this file are identical to the generic
versions and can just be removed.

The drivers that actually use the sh3 specific version also include
cpu/gpio.h directly, with the exception of magicpanelr2, which is
easily fixed. This leaves coldfire as the only gpio driver
that needs something custom for gpiolib.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/Kconfig                    |  1 -
 arch/arm/include/asm/gpio.h         | 21 --------------
 arch/sh/Kconfig                     |  1 -
 arch/sh/boards/board-magicpanelr2.c |  1 +
 arch/sh/include/asm/gpio.h          | 45 -----------------------------
 5 files changed, 1 insertion(+), 68 deletions(-)
 delete mode 100644 arch/arm/include/asm/gpio.h
 delete mode 100644 arch/sh/include/asm/gpio.h
  

Comments

Linus Walleij Jan. 27, 2023, 1:34 p.m. UTC | #1
On Fri, Jan 27, 2023 at 11:12 AM Arnd Bergmann <arnd@kernel.org> wrote:

> From: Arnd Bergmann <arnd@arndb.de>
>
> The arm and sh versions of this file are identical to the generic
> versions and can just be removed.
>
> The drivers that actually use the sh3 specific version also include
> cpu/gpio.h directly, with the exception of magicpanelr2, which is
> easily fixed. This leaves coldfire as the only gpio driver
> that needs something custom for gpiolib.
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

I see I was reviewing as the new patch series was going out, such is life
as an asynchronism! ;D
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
  

Patch

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5c8bab8d6009..b4447a055029 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -24,7 +24,6 @@  config ARM
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_TEARDOWN_DMA_OPS if MMU
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
-	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if CPU_LDREX
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_KEEP_MEMBLOCK
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
deleted file mode 100644
index 4ebbb58f06ea..000000000000
--- a/arch/arm/include/asm/gpio.h
+++ /dev/null
@@ -1,21 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ARCH_ARM_GPIO_H
-#define _ARCH_ARM_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-/* The trivial gpiolib dispatchers */
-#define gpio_get_value  __gpio_get_value
-#define gpio_set_value  __gpio_set_value
-#define gpio_cansleep   __gpio_cansleep
-
-/*
- * Provide a default gpio_to_irq() which should satisfy every case.
- * However, some platforms want to do this differently, so allow them
- * to override it.
- */
-#ifndef gpio_to_irq
-#define gpio_to_irq	__gpio_to_irq
-#endif
-
-#endif /* _ARCH_ARM_GPIO_H */
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 0665ac0add0b..ccb866750a88 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -4,7 +4,6 @@  config SUPERH
 	select ARCH_32BIT_OFF_T
 	select ARCH_ENABLE_MEMORY_HOTPLUG if SPARSEMEM && MMU
 	select ARCH_ENABLE_MEMORY_HOTREMOVE if SPARSEMEM && MMU
-	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
 	select ARCH_HAS_BINFMT_FLAT if !MMU
 	select ARCH_HAS_CURRENT_STACK_POINTER
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index c3434f0ffc7d..626c716c086c 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -21,6 +21,7 @@ 
 #include <linux/sh_intc.h>
 #include <mach/magicpanelr2.h>
 #include <asm/heartbeat.h>
+#include <cpu/gpio.h>
 #include <cpu/sh7720.h>
 
 /* Dummy supplies, where voltage doesn't matter */
diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h
deleted file mode 100644
index 588c1380e4cb..000000000000
--- a/arch/sh/include/asm/gpio.h
+++ /dev/null
@@ -1,45 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0
- *
- *  include/asm-sh/gpio.h
- *
- * Generic GPIO API and pinmux table support for SuperH.
- *
- * Copyright (c) 2008 Magnus Damm
- */
-#ifndef __ASM_SH_GPIO_H
-#define __ASM_SH_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-
-#if defined(CONFIG_CPU_SH3)
-#include <cpu/gpio.h>
-#endif
-
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_GPIOLIB
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return __gpio_to_irq(gpio);
-}
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* __ASM_SH_GPIO_H */