[02/35] Documentation: arm: correct spelling

  Correct spelling problems for Documentation/arm/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/arm/arm.rst                           |    2 +-
 Documentation/arm/ixp4xx.rst                        |    4 ++--
 Documentation/arm/keystone/knav-qmss.rst            |    2 +-
 Documentation/arm/stm32/stm32-dma-mdma-chaining.rst |    6 +++---
 Documentation/arm/sunxi/clocks.rst                  |    2 +-
 Documentation/arm/swp_emulation.rst                 |    2 +-
 Documentation/arm/tcm.rst                           |    2 +-
 Documentation/arm/vlocks.rst                        |    2 +-
 8 files changed, 11 insertions(+), 11 deletions(-)
  

Hi,

Thanks for the patch.

On 1/27/2023 12:09 PM, Randy Dunlap wrote:
> Correct spelling problems for Documentation/arm/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---
>   Documentation/arm/arm.rst                           |    2 +-
>   Documentation/arm/ixp4xx.rst                        |    4 ++--
>   Documentation/arm/keystone/knav-qmss.rst            |    2 +-
>   Documentation/arm/stm32/stm32-dma-mdma-chaining.rst |    6 +++---
>   Documentation/arm/sunxi/clocks.rst                  |    2 +-
>   Documentation/arm/swp_emulation.rst                 |    2 +-
>   Documentation/arm/tcm.rst                           |    2 +-
>   Documentation/arm/vlocks.rst                        |    2 +-
>   8 files changed, 11 insertions(+), 11 deletions(-)
> 
> diff -- a/Documentation/arm/ixp4xx.rst b/Documentation/arm/ixp4xx.rst
> --- a/Documentation/arm/ixp4xx.rst
> +++ b/Documentation/arm/ixp4xx.rst
> @@ -78,9 +78,9 @@ IXP4xx provides two methods of accessing
>   1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
>      To access PCI via this space, we simply ioremap() the BAR
>      into the kernel and we can use the standard read[bwl]/write[bwl]
> -   macros. This is the preffered method due to speed but it
> +   macros. This is the preferred method due to speed but it
>      limits the system to just 64MB of PCI memory. This can be
> -   problamatic if using video cards and other memory-heavy devices.
> +   problematic if using video cards and other memory-heavy devices.
>   
>   2) If > 64MB of memory space is required, the IXP4xx can be
>      configured to use indirect registers to access PCI This allows
> diff -- a/Documentation/arm/swp_emulation.rst b/Documentation/arm/swp_emulation.rst
> --- a/Documentation/arm/swp_emulation.rst
> +++ b/Documentation/arm/swp_emulation.rst
> @@ -1,7 +1,7 @@
>   Software emulation of deprecated SWP instruction (CONFIG_SWP_EMULATE)
>   ---------------------------------------------------------------------
>   
> -ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommeds
> +ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommends
>   moving to the load-locked/store-conditional instructions LDREX and STREX.
>   
>   ARMv7 multiprocessing extensions introduce the ability to disable these
> diff -- a/Documentation/arm/tcm.rst b/Documentation/arm/tcm.rst
> --- a/Documentation/arm/tcm.rst
> +++ b/Documentation/arm/tcm.rst
> @@ -71,7 +71,7 @@ in <asm/tcm.h>. Using this interface it
>   
>   - Have the remaining TCM RAM added to a special
>     allocation pool with gen_pool_create() and gen_pool_add()
> -  and provice tcm_alloc() and tcm_free() for this
> +  and provide tcm_alloc() and tcm_free() for this
>     memory. Such a heap is great for things like saving
>     device state when shutting off device power domains.
>   
> diff -- a/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst b/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
> --- a/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
> +++ b/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
> @@ -359,7 +359,7 @@ Driver updates for STM32 DMA-MDMA chaini
>       descriptor you want a callback to be called at the end of the transfer
>       (dmaengine_prep_slave_sg()) or the period (dmaengine_prep_dma_cyclic()).
>       Depending on the direction, set the callback on the descriptor that finishes
> -    the overal transfer:
> +    the overall transfer:
>   
>       * DMA_DEV_TO_MEM: set the callback on the "MDMA" descriptor
>       * DMA_MEM_TO_DEV: set the callback on the "DMA" descriptor
> @@ -371,7 +371,7 @@ Driver updates for STM32 DMA-MDMA chaini
>     As STM32 MDMA channel transfer is triggered by STM32 DMA, you must issue
>     STM32 MDMA channel before STM32 DMA channel.
>   
> -  If any, your callback will be called to warn you about the end of the overal
> +  If any, your callback will be called to warn you about the end of the overall
>     transfer or the period completion.
>   
>     Don't forget to terminate both channels. STM32 DMA channel is configured in
> @@ -412,4 +412,4 @@ Resources
>   
>   :Authors:
>   
> -- Amelie Delaunay <amelie.delaunay@foss.st.com>
> \ No newline at end of file
> +- Amelie Delaunay <amelie.delaunay@foss.st.com>
> diff -- a/Documentation/arm/arm.rst b/Documentation/arm/arm.rst
> --- a/Documentation/arm/arm.rst
> +++ b/Documentation/arm/arm.rst
> @@ -141,7 +141,7 @@ ST506 hard drives
>     `*configure` harddrive set to 2). I've got an internal 20MB and a great
>     big external 5.25" FH 64MB drive (who could ever want more :-) ).
>   
> -  I've just got 240K/s off it (a dd with bs=128k); thats about half of what
> +  I've just got 240K/s off it (a dd with bs=128k); that's about half of what
>     RiscOS gets; but it's a heck of a lot better than the 50K/s I was getting
>     last week :-)
>   
> diff -- a/Documentation/arm/keystone/knav-qmss.rst b/Documentation/arm/keystone/knav-qmss.rst
> --- a/Documentation/arm/keystone/knav-qmss.rst
> +++ b/Documentation/arm/keystone/knav-qmss.rst
> @@ -39,7 +39,7 @@ CPPI/QMSS Low Level Driver document (doc
>   
>   	git://git.ti.com/keystone-rtos/qmss-lld.git
>   
> -k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports upto 48 accumulator
> +k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports up to 48 accumulator
>   channels. This firmware is available under ti-keystone folder of
>   firmware.git at
>   
> diff -- a/Documentation/arm/sunxi/clocks.rst b/Documentation/arm/sunxi/clocks.rst
> --- a/Documentation/arm/sunxi/clocks.rst
> +++ b/Documentation/arm/sunxi/clocks.rst
> @@ -5,7 +5,7 @@ Frequently asked questions about the sun
>   This document contains useful bits of information that people tend to ask
>   about the sunxi clock system, as well as accompanying ASCII art when adequate.
>   
> -Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the
> +Q: Why is the main 24MHz oscillator gateable? Wouldn't that break the
>      system?
>   
>   A: The 24MHz oscillator allows gating to save power. Indeed, if gated
> diff -- a/Documentation/arm/vlocks.rst b/Documentation/arm/vlocks.rst
> --- a/Documentation/arm/vlocks.rst
> +++ b/Documentation/arm/vlocks.rst
> @@ -155,7 +155,7 @@ the basic algorithm:
>      optimisation.
>   
>      If there are too many CPUs to read the currently_voting array in
> -   one transaction then multiple transations are still required.  The
> +   one transaction then multiple transactions are still required.  The
>      implementation uses a simple loop of word-sized loads for this
>      case.  The number of transactions is still fewer than would be
>      required if bytes were loaded individually.
> 

Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>

-Mukesh

> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel