ARM: dts: omap: align UART node name with bindings
Commit Message
Bindings expect UART/serial node names to be "serial".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/omap-zoom-common.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
Comments
On Mon, 23 Jan 2023 16:15:31 +0100, Krzysztof Kozlowski wrote:
> Bindings expect UART/serial node names to be "serial".
>
>
Applied, thanks!
(Patch was waiting for quite a long on the lists, let me know if anyone wants
to pick it up instead)
[1/1] ARM: dts: omap: align UART node name with bindings
https://git.kernel.org/krzk/linux-dt/c/f7ec6efef4560edeebdca10b73a92f37c6fb16cf
Best regards,
@@ -14,7 +14,7 @@ &gpmc {
* they probably share the same GPIO IRQ
* REVISIT: Add timing support from slls644g.pdf
*/
- uart@3,0 {
+ serial@3,0 {
compatible = "ns16550a";
reg = <3 0 8>; /* CS3, offset 0, IO size 8 */
bank-width = <2>;
@@ -50,7 +50,7 @@ uart@3,0 {
gpmc,wr-data-mux-bus-ns = <45>;
gpmc,wr-access-ns = <145>;
};
- uart@3,1 {
+ serial@3,1 {
compatible = "ns16550a";
reg = <3 0x100 8>; /* CS3, offset 0x100, IO size 8 */
bank-width = <2>;
@@ -61,7 +61,7 @@ uart@3,1 {
clock-frequency = <1843200>;
current-speed = <115200>;
};
- uart@3,2 {
+ serial@3,2 {
compatible = "ns16550a";
reg = <3 0x200 8>; /* CS3, offset 0x200, IO size 8 */
bank-width = <2>;
@@ -72,7 +72,7 @@ uart@3,2 {
clock-frequency = <1843200>;
current-speed = <115200>;
};
- uart@3,3 {
+ serial@3,3 {
compatible = "ns16550a";
reg = <3 0x300 8>; /* CS3, offset 0x300, IO size 8 */
bank-width = <2>;