diff mbox series

[v5,04/39] x86/cpufeatures: Enable CET CR4 bit for shadow stack

Message ID 20230119212317.8324-5-rick.p.edgecombe@intel.com
State New
Headers
Series Shadow stacks for userspace |

Commit Message

Edgecombe, Rick P Jan. 19, 2023, 9:22 p.m. UTC 
  From: Yu-cheng Yu <yu-cheng.yu@intel.com>

Setting CR4.CET is a prerequisite for utilizing any CET features, most of
which also require setting MSRs.

Kernel IBT already enables the CET CR4 bit when it detects IBT HW support
and is configured with kernel IBT. However, future patches that enable
userspace shadow stack support will need the bit set as well. So change
the logic to enable it in either case.

Clear MSR_IA32_U_CET in cet_disable() so that it can't live to see
userspace in a new kexec-ed kernel that has CR4.CET set from kernel IBT.

Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Tested-by: John Allen <john.allen@amd.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Kees Cook <keescook@chromium.org>
---

v5:
 - Remove #ifdeffery (Boris)

v4:
 - Add back dedicated command line disable: "nousershtk" (Boris)

v3:
 - Remove stay new line (Boris)
 - Simplify commit log (Andrew Cooper)

v2:
 - In the shadow stack case, go back to only setting CR4.CET if the
   kernel is compiled with user shadow stack support.
 - Clear MSR_IA32_U_CET as well. (PeterZ)

 arch/x86/kernel/cpu/common.c | 35 +++++++++++++++++++++++++++--------
 1 file changed, 27 insertions(+), 8 deletions(-)

Comments

Kees Cook Jan. 20, 2023, 12:46 a.m. UTC | #1 
On Thu, Jan 19, 2023 at 01:22:42PM -0800, Rick Edgecombe wrote:
> From: Yu-cheng Yu <yu-cheng.yu@intel.com>
> 
> Setting CR4.CET is a prerequisite for utilizing any CET features, most of
> which also require setting MSRs.
> 
> Kernel IBT already enables the CET CR4 bit when it detects IBT HW support
> and is configured with kernel IBT. However, future patches that enable
> userspace shadow stack support will need the bit set as well. So change
> the logic to enable it in either case.
> 
> Clear MSR_IA32_U_CET in cet_disable() so that it can't live to see
> userspace in a new kexec-ed kernel that has CR4.CET set from kernel IBT.
> 
> Tested-by: Pengfei Xu <pengfei.xu@intel.com>
> Tested-by: John Allen <john.allen@amd.com>
> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>

Reviewed-by: Kees Cook <keescook@chromium.org>
diff mbox series

Patch

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index cec654e674ff..80507a5ba0ca 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -599,27 +599,43 @@  __noendbr void ibt_restore(u64 save)
 
 static __always_inline void setup_cet(struct cpuinfo_x86 *c)
 {
-	u64 msr = CET_ENDBR_EN;
+	bool user_shstk, kernel_ibt;
 
-	if (!HAS_KERNEL_IBT ||
-	    !cpu_feature_enabled(X86_FEATURE_IBT))
+	if (!IS_ENABLED(CONFIG_X86_CET))
 		return;
 
-	wrmsrl(MSR_IA32_S_CET, msr);
+	kernel_ibt = HAS_KERNEL_IBT && cpu_feature_enabled(X86_FEATURE_IBT);
+	user_shstk = cpu_feature_enabled(X86_FEATURE_SHSTK) &&
+		     IS_ENABLED(CONFIG_X86_USER_SHADOW_STACK);
+
+	if (!kernel_ibt && !user_shstk)
+		return;
+
+	if (user_shstk)
+		set_cpu_cap(c, X86_FEATURE_USER_SHSTK);
+
+	if (kernel_ibt)
+		wrmsrl(MSR_IA32_S_CET, CET_ENDBR_EN);
+	else
+		wrmsrl(MSR_IA32_S_CET, 0);
+
 	cr4_set_bits(X86_CR4_CET);
 
-	if (!ibt_selftest()) {
+	if (kernel_ibt && !ibt_selftest()) {
 		pr_err("IBT selftest: Failed!\n");
 		wrmsrl(MSR_IA32_S_CET, 0);
 		setup_clear_cpu_cap(X86_FEATURE_IBT);
-		return;
 	}
 }
 
 __noendbr void cet_disable(void)
 {
-	if (cpu_feature_enabled(X86_FEATURE_IBT))
-		wrmsrl(MSR_IA32_S_CET, 0);
+	if (!(cpu_feature_enabled(X86_FEATURE_IBT) ||
+	      cpu_feature_enabled(X86_FEATURE_SHSTK)))
+		return;
+
+	wrmsrl(MSR_IA32_S_CET, 0);
+	wrmsrl(MSR_IA32_U_CET, 0);
 }
 
 /*
@@ -1476,6 +1492,9 @@  static void __init cpu_parse_early_param(void)
 	if (cmdline_find_option_bool(boot_command_line, "noxsaves"))
 		setup_clear_cpu_cap(X86_FEATURE_XSAVES);
 
+	if (cmdline_find_option_bool(boot_command_line, "nousershstk"))
+		setup_clear_cpu_cap(X86_FEATURE_USER_SHSTK);
+
 	arglen = cmdline_find_option(boot_command_line, "clearcpuid", arg, sizeof(arg));
 	if (arglen <= 0)
 		return;