[v4,net-next,03/12] docs: ethtool-netlink: document interface for MAC Merge layer
Commit Message
Show details about the structures passed back and forth related to MAC
Merge layer configuration, state and statistics. The rendered htmldocs
will be much more verbose due to the kerneldoc references.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
v3->v4: none
v2->v3:
- reformat tables
- delete obsolete netlink attributes and document new ones
v1->v2: patch is new
Documentation/networking/ethtool-netlink.rst | 89 ++++++++++++++++++++
Documentation/networking/statistics.rst | 1 +
2 files changed, 90 insertions(+)
@@ -223,6 +223,8 @@ Userspace to kernel:
``ETHTOOL_MSG_PSE_SET`` set PSE parameters
``ETHTOOL_MSG_PSE_GET`` get PSE parameters
``ETHTOOL_MSG_RSS_GET`` get RSS settings
+ ``ETHTOOL_MSG_MM_GET`` get MAC merge layer state
+ ``ETHTOOL_MSG_MM_SET`` set MAC merge layer parameters
===================================== =================================
Kernel to userspace:
@@ -265,6 +267,7 @@ Kernel to userspace:
``ETHTOOL_MSG_MODULE_GET_REPLY`` transceiver module parameters
``ETHTOOL_MSG_PSE_GET_REPLY`` PSE parameters
``ETHTOOL_MSG_RSS_GET_REPLY`` RSS settings
+ ``ETHTOOL_MSG_MM_GET_REPLY`` MAC merge layer status
======================================== =================================
``GET`` requests are sent by userspace applications to retrieve device
@@ -1868,6 +1871,90 @@ When set, the ``ETHTOOL_A_PLCA_STATUS`` attribute indicates whether the node is
detecting the presence of the BEACON on the network. This flag is
corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.2 aPLCAStatus.
+MM_GET
+======
+
+Retrieve 802.3 MAC Merge parameters.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_MM_HEADER`` nested request header
+ ==================================== ====== ==========================
+
+Kernel response contents:
+
+ ================================= ====== ===================================
+ ``ETHTOOL_A_MM_HEADER`` nested request header
+ ``ETHTOOL_A_MM_PMAC_ENABLED`` bool set if RX of preemptible and SMD-V
+ frames is enabled
+ ``ETHTOOL_A_MM_TX_ENABLED`` bool set if TX of preemptible frames is
+ administratively enabled (might be
+ inactive if verification failed)
+ ``ETHTOOL_A_MM_TX_ACTIVE`` bool set if TX of preemptible frames is
+ operationally enabled
+ ``ETHTOOL_A_MM_TX_MIN_FRAG_SIZE`` u32 minimum size of transmitted
+ non-final fragments, in octets
+ ``ETHTOOL_A_MM_RX_MIN_FRAG_SIZE`` u32 minimum size of received non-final
+ fragments, in octets
+ ``ETHTOOL_A_MM_VERIFY_ENABLED`` bool set if TX of SMD-V frames is
+ administratively enabled
+ ``ETHTOOL_A_MM_VERIFY_STATUS`` u8 state of the verification function
+ ``ETHTOOL_A_MM_VERIFY_TIME`` u32 delay between verification attempts
+ ``ETHTOOL_A_MM_MAX_VERIFY_TIME``` u32 maximum verification interval
+ supported by device
+ ``ETHTOOL_A_MM_STATS`` nested IEEE 802.3-2018 subclause 30.14.1
+ oMACMergeEntity statistics counters
+ ================================= ====== ===================================
+
+The attributes are populated by the device driver through the following
+structure:
+
+.. kernel-doc:: include/linux/ethtool.h
+ :identifiers: ethtool_mm_state
+
+The ``ETHTOOL_A_MM_VERIFY_STATUS`` will report one of the values from
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+ :identifiers: ethtool_mm_verify_status
+
+If ``ETHTOOL_A_MM_VERIFY_ENABLED`` was passed as false in the ``MM_SET``
+command, ``ETHTOOL_A_MM_VERIFY_STATUS`` will report either
+``ETHTOOL_MM_VERIFY_STATUS_INITIAL`` or ``ETHTOOL_MM_VERIFY_STATUS_DISABLED``,
+otherwise it should report one of the other states.
+
+It is recommended that drivers start with the pMAC disabled, and enable it upon
+user space request. It is also recommended that user space does not depend upon
+the default values from ``ETHTOOL_MSG_MM_GET`` requests.
+
+``ETHTOOL_A_MM_STATS`` are reported if ``ETHTOOL_FLAG_STATS`` was set in
+``ETHTOOL_A_HEADER_FLAGS``. The attribute will be empty if driver did not
+report any statistics. Drivers fill in the statistics in the following
+structure:
+
+.. kernel-doc:: include/linux/ethtool.h
+ :identifiers: ethtool_mm_stats
+
+MM_SET
+======
+
+Modifies the configuration of the 802.3 MAC Merge layer.
+
+Request contents:
+
+ ================================= ====== ==========================
+ ``ETHTOOL_A_MM_VERIFY_TIME`` u32 see MM_GET description
+ ``ETHTOOL_A_MM_VERIFY_ENABLED`` bool see MM_GET description
+ ``ETHTOOL_A_MM_TX_ENABLED`` bool see MM_GET description
+ ``ETHTOOL_A_MM_PMAC_ENABLED`` bool see MM_GET description
+ ``ETHTOOL_A_MM_TX_MIN_FRAG_SIZE`` u32 see MM_GET description
+ ================================= ====== ==========================
+
+The attributes are propagated to the driver through the following structure:
+
+.. kernel-doc:: include/linux/ethtool.h
+ :identifiers: ethtool_mm_cfg
+
Request translation
===================
@@ -1972,4 +2059,6 @@ are netlink only.
n/a ``ETHTOOL_MSG_PLCA_GET_CFG``
n/a ``ETHTOOL_MSG_PLCA_SET_CFG``
n/a ``ETHTOOL_MSG_PLCA_GET_STATUS``
+ n/a ``ETHTOOL_MSG_MM_GET``
+ n/a ``ETHTOOL_MSG_MM_SET``
=================================== =====================================
@@ -171,6 +171,7 @@ statistics are supported in the following commands:
- `ETHTOOL_MSG_PAUSE_GET`
- `ETHTOOL_MSG_FEC_GET`
+ - `ETHTOOL_MSG_MM_GET`
debugfs
-------