[v2] PCI: cadence: Fix next function value in case of ARI
Commit Message
From: Jasko-EXT Wojciech <wojciech.jasko-EXT@continental-corporation.com>
Next function field in ARI_CAP_AND_CTR register for last function should
be zero by default as per the PCIe spec but thats not the case, so this patch
clears the next function field for last function used.
Signed-off-by: Jasko-EXT Wojciech <wojciech.jasko-EXT@continental-corporation.com>
Signed-off-by: Achal Verma <a-verma1@ti.com>
---
drivers/pci/controller/cadence/pcie-cadence-ep.c | 14 +++++++++++++-
drivers/pci/controller/cadence/pcie-cadence.h | 6 ++++++
2 files changed, 19 insertions(+), 1 deletion(-)
@@ -565,7 +565,8 @@ static int cdns_pcie_ep_start(struct pci_epc *epc)
struct cdns_pcie *pcie = &ep->pcie;
struct device *dev = pcie->dev;
int max_epfs = sizeof(epc->function_num_map) * 8;
- int ret, value, epf;
+ int ret, epf, last_fn;
+ u32 reg, value;
/*
* BIT(0) is hardwired to 1, hence function 0 is always enabled
@@ -573,6 +574,17 @@ static int cdns_pcie_ep_start(struct pci_epc *epc)
*/
cdns_pcie_writel(pcie, CDNS_PCIE_LM_EP_FUNC_CFG, epc->function_num_map);
+ /*
+ * Next function field in ARI_CAP_AND_CTR register for last function
+ * should be 0.
+ * Clearing Next Function Number field for the last function used.
+ */
+ last_fn = find_last_bit(&epc->function_num_map, BITS_PER_LONG);
+ reg = CDNS_PCIE_CORE_PF_I_ARI_CAP_AND_CTRL(last_fn);
+ value = cdns_pcie_readl(pcie, reg);
+ value &= ~CDNS_PCIE_ARI_CAP_NFN_MASK;
+ cdns_pcie_writel(pcie, reg, value);
+
if (ep->quirk_disable_flr) {
for (epf = 0; epf < max_epfs; epf++) {
if (!(epc->function_num_map & BIT(epf)))
@@ -130,6 +130,12 @@
#define CDNS_PCIE_EP_FUNC_DEV_CAP_OFFSET 0xc0
#define CDNS_PCIE_EP_FUNC_SRIOV_CAP_OFFSET 0x200
+/*
+ * Endpoint PF Registers
+ */
+#define CDNS_PCIE_CORE_PF_I_ARI_CAP_AND_CTRL(fn) (0x144 + (fn) * 0x1000)
+#define CDNS_PCIE_ARI_CAP_NFN_MASK GENMASK(15, 8)
+
/*
* Root Port Registers (PCI configuration space for the root port function)
*/