[net-next,v2,1/6] net: mdio: Move mdiobus_scan() within file
Commit Message
From: Andrew Lunn <andrew@lunn.ch>
No functional change, just place it earlier in preparation for some
refactoring.
While at it, correct the comment format and one typo.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
---
drivers/net/phy/mdio_bus.c | 101 ++++++++++++++++++++++-----------------------
1 file changed, 50 insertions(+), 51 deletions(-)
@@ -506,6 +506,56 @@ static int mdiobus_create_device(struct mii_bus *bus,
return ret;
}
+/**
+ * mdiobus_scan - scan a bus for MDIO devices.
+ * @bus: mii_bus to scan
+ * @addr: address on bus to scan
+ *
+ * This function scans the MDIO bus, looking for devices which can be
+ * identified using a vendor/product ID in registers 2 and 3. Not all
+ * MDIO devices have such registers, but PHY devices typically
+ * do. Hence this function assumes anything found is a PHY, or can be
+ * treated as a PHY. Other MDIO devices, such as switches, will
+ * probably not be found during the scan.
+ */
+struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr)
+{
+ struct phy_device *phydev = ERR_PTR(-ENODEV);
+ int err;
+
+ switch (bus->probe_capabilities) {
+ case MDIOBUS_NO_CAP:
+ case MDIOBUS_C22:
+ phydev = get_phy_device(bus, addr, false);
+ break;
+ case MDIOBUS_C45:
+ phydev = get_phy_device(bus, addr, true);
+ break;
+ case MDIOBUS_C22_C45:
+ phydev = get_phy_device(bus, addr, false);
+ if (IS_ERR(phydev))
+ phydev = get_phy_device(bus, addr, true);
+ break;
+ }
+
+ if (IS_ERR(phydev))
+ return phydev;
+
+ /* For DT, see if the auto-probed phy has a corresponding child
+ * in the bus node, and set the of_node pointer in this case.
+ */
+ of_mdiobus_link_mdiodev(bus, &phydev->mdio);
+
+ err = phy_device_register(phydev);
+ if (err) {
+ phy_device_free(phydev);
+ return ERR_PTR(-ENODEV);
+ }
+
+ return phydev;
+}
+EXPORT_SYMBOL(mdiobus_scan);
+
/**
* __mdiobus_register - bring up all the PHYs on a given bus and attach them to bus
* @bus: target mii_bus
@@ -679,57 +729,6 @@ void mdiobus_free(struct mii_bus *bus)
}
EXPORT_SYMBOL(mdiobus_free);
-/**
- * mdiobus_scan - scan a bus for MDIO devices.
- * @bus: mii_bus to scan
- * @addr: address on bus to scan
- *
- * This function scans the MDIO bus, looking for devices which can be
- * identified using a vendor/product ID in registers 2 and 3. Not all
- * MDIO devices have such registers, but PHY devices typically
- * do. Hence this function assumes anything found is a PHY, or can be
- * treated as a PHY. Other MDIO devices, such as switches, will
- * probably not be found during the scan.
- */
-struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr)
-{
- struct phy_device *phydev = ERR_PTR(-ENODEV);
- int err;
-
- switch (bus->probe_capabilities) {
- case MDIOBUS_NO_CAP:
- case MDIOBUS_C22:
- phydev = get_phy_device(bus, addr, false);
- break;
- case MDIOBUS_C45:
- phydev = get_phy_device(bus, addr, true);
- break;
- case MDIOBUS_C22_C45:
- phydev = get_phy_device(bus, addr, false);
- if (IS_ERR(phydev))
- phydev = get_phy_device(bus, addr, true);
- break;
- }
-
- if (IS_ERR(phydev))
- return phydev;
-
- /*
- * For DT, see if the auto-probed phy has a correspoding child
- * in the bus node, and set the of_node pointer in this case.
- */
- of_mdiobus_link_mdiodev(bus, &phydev->mdio);
-
- err = phy_device_register(phydev);
- if (err) {
- phy_device_free(phydev);
- return ERR_PTR(-ENODEV);
- }
-
- return phydev;
-}
-EXPORT_SYMBOL(mdiobus_scan);
-
static void mdiobus_stats_acct(struct mdio_bus_stats *stats, bool op, int ret)
{
preempt_disable();