diff mbox series

[v2,2/3] spi: dt-bindings: Add hold/inactive CS delay peripheral properties

Message ID 20230113102309.18308-3-marcan@marcan.st
State New
Headers
Series SPI core CS delay fixes and additions |

Commit Message

Hector Martin Jan. 13, 2023, 10:23 a.m. UTC 
  From: Janne Grunau <j@jannau.net>

These two properties complete the bindings for the Linux spi_device cs
model, which includes cs_setup, cs_hold and cs_inactive delay values.

Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
---
 .../devicetree/bindings/spi/spi-peripheral-props.yaml  | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
index 9a60c0664bbe..782a014b63a7 100644
--- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
@@ -49,6 +49,16 @@  properties:
       Delay in nanoseconds to be introduced by the controller after CS is
       asserted.
 
+  spi-cs-hold-delay-ns:
+    description:
+      Delay in nanoseconds to be introduced by the controller before CS is
+      de-asserted.
+
+  spi-cs-inactive-delay-ns:
+    description:
+      Delay in nanoseconds to be introduced by the controller after CS is
+      de-asserted.
+
   spi-rx-bus-width:
     description:
       Bus width to the SPI bus used for read transfers.