diff mbox series

hwmon: (sht15,sht21) fix kernel-doc warnings

Message ID 20230113064556.21685-1-rdunlap@infradead.org
State New
Headers
Series hwmon: (sht15,sht21) fix kernel-doc warnings |

Commit Message

Randy Dunlap Jan. 13, 2023, 6:45 a.m. UTC 
  Use the correct function names in kernel-doc comments to prevent these
warnings:

drivers/hwmon/sht15.c:682: warning: expecting prototype for sht15_show_status(). Prototype was for sht15_status_show() instead
drivers/hwmon/sht15.c:705: warning: expecting prototype for sht15_store_heater(). Prototype was for sht15_status_store() instead
drivers/hwmon/sht15.c:738: warning: expecting prototype for sht15_show_temp(). Prototype was for sht15_temp_show() instead
drivers/hwmon/sht15.c:760: warning: expecting prototype for sht15_show_humidity(). Prototype was for sht15_humidity_show() instead
drivers/hwmon/sht21.c:128: warning: expecting prototype for sht21_show_temperature(). Prototype was for sht21_temperature_show() instead
drivers/hwmon/sht21.c:149: warning: expecting prototype for sht21_show_humidity(). Prototype was for sht21_humidity_show() instead

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
---
 drivers/hwmon/sht15.c |    8 ++++----
 drivers/hwmon/sht21.c |    4 ++--
 2 files changed, 6 insertions(+), 6 deletions(-)

Comments

Guenter Roeck Jan. 15, 2023, 4:03 p.m. UTC | #1 
On Thu, Jan 12, 2023 at 10:45:56PM -0800, Randy Dunlap wrote:
> Use the correct function names in kernel-doc comments to prevent these
> warnings:
> 
> drivers/hwmon/sht15.c:682: warning: expecting prototype for sht15_show_status(). Prototype was for sht15_status_show() instead
> drivers/hwmon/sht15.c:705: warning: expecting prototype for sht15_store_heater(). Prototype was for sht15_status_store() instead
> drivers/hwmon/sht15.c:738: warning: expecting prototype for sht15_show_temp(). Prototype was for sht15_temp_show() instead
> drivers/hwmon/sht15.c:760: warning: expecting prototype for sht15_show_humidity(). Prototype was for sht15_humidity_show() instead
> drivers/hwmon/sht21.c:128: warning: expecting prototype for sht21_show_temperature(). Prototype was for sht21_temperature_show() instead
> drivers/hwmon/sht21.c:149: warning: expecting prototype for sht21_show_humidity(). Prototype was for sht21_humidity_show() instead
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Jean Delvare <jdelvare@suse.com>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: linux-hwmon@vger.kernel.org

Applied to hwmon-next.

Thanks,
Guenter
diff mbox series

Patch

diff -- a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -668,7 +668,7 @@  static inline int sht15_calc_humid(struc
 }
 
 /**
- * sht15_show_status() - show status information in sysfs
+ * sht15_status_show() - show status information in sysfs
  * @dev:	device.
  * @attr:	device attribute.
  * @buf:	sysfs buffer where information is written to.
@@ -690,7 +690,7 @@  static ssize_t sht15_status_show(struct
 }
 
 /**
- * sht15_store_heater() - change heater state via sysfs
+ * sht15_status_store() - change heater state via sysfs
  * @dev:	device.
  * @attr:	device attribute.
  * @buf:	sysfs buffer to read the new heater state from.
@@ -725,7 +725,7 @@  static ssize_t sht15_status_store(struct
 }
 
 /**
- * sht15_show_temp() - show temperature measurement value in sysfs
+ * sht15_temp_show() - show temperature measurement value in sysfs
  * @dev:	device.
  * @attr:	device attribute.
  * @buf:	sysfs buffer where measurement values are written to.
@@ -747,7 +747,7 @@  static ssize_t sht15_temp_show(struct de
 }
 
 /**
- * sht15_show_humidity() - show humidity measurement value in sysfs
+ * sht15_humidity_show() - show humidity measurement value in sysfs
  * @dev:	device.
  * @attr:	device attribute.
  * @buf:	sysfs buffer where measurement values are written to.
diff -- a/drivers/hwmon/sht21.c b/drivers/hwmon/sht21.c
--- a/drivers/hwmon/sht21.c
+++ b/drivers/hwmon/sht21.c
@@ -114,7 +114,7 @@  out:
 }
 
 /**
- * sht21_show_temperature() - show temperature measurement value in sysfs
+ * sht21_temperature_show() - show temperature measurement value in sysfs
  * @dev: device
  * @attr: device attribute
  * @buf: sysfs buffer (PAGE_SIZE) where measurement values are written to
@@ -136,7 +136,7 @@  static ssize_t sht21_temperature_show(st
 }
 
 /**
- * sht21_show_humidity() - show humidity measurement value in sysfs
+ * sht21_humidity_show() - show humidity measurement value in sysfs
  * @dev: device
  * @attr: device attribute
  * @buf: sysfs buffer (PAGE_SIZE) where measurement values are written to