[v2] tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()

Message ID 20230112161213.1434854-1-john.ogness@linutronix.de
State New
Headers
Series [v2] tty: serial: kgdboc: fix mutex locking order for configure_kgdboc() |

Commit Message

John Ogness Jan. 12, 2023, 4:12 p.m. UTC
  Several mutexes are taken while setting up console serial ports. In
particular, the tty_port->mutex and @console_mutex are taken:

  serial_pnp_probe
    serial8250_register_8250_port
      uart_add_one_port (locks tty_port->mutex)
        uart_configure_port
          register_console (locks @console_mutex)

In order to synchronize kgdb's tty_find_polling_driver() with
register_console(), commit 6193bc90849a ("tty: serial: kgdboc:
synchronize tty_find_polling_driver() and register_console()") takes
the @console_mutex. However, this leads to the following call chain
(with locking):

  platform_probe
    kgdboc_probe
      configure_kgdboc (locks @console_mutex)
        tty_find_polling_driver
          uart_poll_init (locks tty_port->mutex)
            uart_set_options

This is clearly deadlock potential due to the reverse lock ordering.

Since uart_set_options() requires holding @console_mutex in order to
serialize early initialization of the serial-console lock, take the
@console_mutex in uart_poll_init() instead of configure_kgdboc().

Since configure_kgdboc() was using @console_mutex for safe traversal
of the console list, change it to use the SRCU iterator instead.

Add comments to uart_set_options() kerneldoc mentioning that it
requires holding @console_mutex (aka the console_list_lock).

Fixes: 6193bc90849a ("tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console()")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
---
 drivers/tty/serial/kgdboc.c      | 20 +++++---------------
 drivers/tty/serial/serial_core.c |  5 +++++
 2 files changed, 10 insertions(+), 15 deletions(-)


base-commit: b7bfaa761d760e72a969d116517eaa12e404c262
  

Comments

Petr Mladek Jan. 13, 2023, 9:13 a.m. UTC | #1
On Thu 2023-01-12 17:18:13, John Ogness wrote:
> Several mutexes are taken while setting up console serial ports. In
> particular, the tty_port->mutex and @console_mutex are taken:
> 
>   serial_pnp_probe
>     serial8250_register_8250_port
>       uart_add_one_port (locks tty_port->mutex)
>         uart_configure_port
>           register_console (locks @console_mutex)
> 
> In order to synchronize kgdb's tty_find_polling_driver() with
> register_console(), commit 6193bc90849a ("tty: serial: kgdboc:
> synchronize tty_find_polling_driver() and register_console()") takes
> the @console_mutex. However, this leads to the following call chain
> (with locking):
> 
>   platform_probe
>     kgdboc_probe
>       configure_kgdboc (locks @console_mutex)
>         tty_find_polling_driver
>           uart_poll_init (locks tty_port->mutex)
>             uart_set_options
> 
> This is clearly deadlock potential due to the reverse lock ordering.
> 
> Since uart_set_options() requires holding @console_mutex in order to
> serialize early initialization of the serial-console lock, take the
> @console_mutex in uart_poll_init() instead of configure_kgdboc().
> 
> Since configure_kgdboc() was using @console_mutex for safe traversal
> of the console list, change it to use the SRCU iterator instead.
> 
> Add comments to uart_set_options() kerneldoc mentioning that it
> requires holding @console_mutex (aka the console_list_lock).
> 
> Fixes: 6193bc90849a ("tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console()")
> Signed-off-by: John Ogness <john.ogness@linutronix.de>
> Reviewed-by: Petr Mladek <pmladek@suse.com>

JFYI, the patch has been committed into printk/linux.git,
branch rework/console-list-lock.

I am going to give it few days in linux-next. If there is no problem
I will send a pull request for 6.2-rc5 later the following week.

Please, let me known if you have another preference.

Best Regards,
Petr
  
John Ogness Jan. 13, 2023, 9:32 a.m. UTC | #2
On 2023-01-13, Petr Mladek <pmladek@suse.com> wrote:
> JFYI, the patch has been committed into printk/linux.git,
> branch rework/console-list-lock.

Thanks!

> I am going to give it few days in linux-next. If there is no problem
> I will send a pull request for 6.2-rc5 later the following week.

Sounds good to me. For the 6.2 pull request, please also add Sergey's
reviewed-by tag.

John Ogness
  
Petr Mladek Jan. 13, 2023, 1:01 p.m. UTC | #3
On Fri 2023-01-13 10:38:24, John Ogness wrote:
> On 2023-01-13, Petr Mladek <pmladek@suse.com> wrote:
> > JFYI, the patch has been committed into printk/linux.git,
> > branch rework/console-list-lock.
> 
> > I am going to give it few days in linux-next. If there is no problem
> > I will send a pull request for 6.2-rc5 later the following week.
> 
> Sounds good to me. For the 6.2 pull request, please also add Sergey's
> reviewed-by tag.

Done. Sigh, I have missed it in the original commit. I am somehow in
rush last three days and "b4" script did not get it.

Best Regards,
Petr
  

Patch

diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index a3ed9b34e2ab..7ce7bb164005 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -171,6 +171,7 @@  static int configure_kgdboc(void)
 	int err = -ENODEV;
 	char *cptr = config;
 	struct console *cons;
+	int cookie;
 
 	if (!strlen(config) || isspace(config[0])) {
 		err = 0;
@@ -189,20 +190,9 @@  static int configure_kgdboc(void)
 	if (kgdboc_register_kbd(&cptr))
 		goto do_register;
 
-	/*
-	 * tty_find_polling_driver() can call uart_set_options()
-	 * (via poll_init) to configure the uart. Take the console_list_lock
-	 * in order to synchronize against register_console(), which can also
-	 * configure the uart via uart_set_options(). This also allows safe
-	 * traversal of the console list.
-	 */
-	console_list_lock();
-
 	p = tty_find_polling_driver(cptr, &tty_line);
-	if (!p) {
-		console_list_unlock();
+	if (!p)
 		goto noconfig;
-	}
 
 	/*
 	 * Take console_lock to serialize device() callback with
@@ -211,7 +201,8 @@  static int configure_kgdboc(void)
 	 */
 	console_lock();
 
-	for_each_console(cons) {
+	cookie = console_srcu_read_lock();
+	for_each_console_srcu(cons) {
 		int idx;
 		if (cons->device && cons->device(cons, &idx) == p &&
 		    idx == tty_line) {
@@ -219,11 +210,10 @@  static int configure_kgdboc(void)
 			break;
 		}
 	}
+	console_srcu_read_unlock(cookie);
 
 	console_unlock();
 
-	console_list_unlock();
-
 	kgdb_tty_driver = p;
 	kgdb_tty_line = tty_line;
 
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index b9fbbee598b8..ec874f3a567c 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2212,6 +2212,9 @@  EXPORT_SYMBOL_GPL(uart_parse_options);
  * @parity: parity character - 'n' (none), 'o' (odd), 'e' (even)
  * @bits: number of data bits
  * @flow: flow control character - 'r' (rts)
+ *
+ * Locking: Caller must hold console_list_lock in order to serialize
+ * early initialization of the serial-console lock.
  */
 int
 uart_set_options(struct uart_port *port, struct console *co,
@@ -2619,7 +2622,9 @@  static int uart_poll_init(struct tty_driver *driver, int line, char *options)
 
 	if (!ret && options) {
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
+		console_list_lock();
 		ret = uart_set_options(port, NULL, baud, parity, bits, flow);
+		console_list_unlock();
 	}
 out:
 	mutex_unlock(&tport->mutex);