[1/4] arm64: dts: qcom: msm/apq8x16-*: Move status property last

  It's agreed that the status property should always be the last.
Move it in all msm8916 dts.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dts      | 44 ++++++++++---------
 .../boot/dts/qcom/msm8916-alcatel-idol347.dts | 12 ++---
 .../arm64/boot/dts/qcom/msm8916-asus-z00l.dts |  9 ++--
 .../arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 16 +++----
 .../boot/dts/qcom/msm8916-longcheer-l8150.dts | 12 ++---
 .../boot/dts/qcom/msm8916-longcheer-l8910.dts | 12 ++---
 .../qcom/msm8916-samsung-a2015-common.dtsi    | 12 ++---
 .../boot/dts/qcom/msm8916-samsung-j5.dts      | 12 ++---
 .../dts/qcom/msm8916-samsung-serranove.dts    | 12 ++---
 .../dts/qcom/msm8916-wingtech-wt88047.dts     | 12 ++---
 10 files changed, 78 insertions(+), 75 deletions(-)
  

On 9.01.2023 12:01, Nikita Travkin wrote:
> It's agreed that the status property should always be the last.
> Move it in all msm8916 dts.
> 
> Signed-off-by: Nikita Travkin <nikita@trvn.ru>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/apq8016-sbc.dts      | 44 ++++++++++---------
>  .../boot/dts/qcom/msm8916-alcatel-idol347.dts | 12 ++---
>  .../arm64/boot/dts/qcom/msm8916-asus-z00l.dts |  9 ++--
>  .../arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 16 +++----
>  .../boot/dts/qcom/msm8916-longcheer-l8150.dts | 12 ++---
>  .../boot/dts/qcom/msm8916-longcheer-l8910.dts | 12 ++---
>  .../qcom/msm8916-samsung-a2015-common.dtsi    | 12 ++---
>  .../boot/dts/qcom/msm8916-samsung-j5.dts      | 12 ++---
>  .../dts/qcom/msm8916-samsung-serranove.dts    | 12 ++---
>  .../dts/qcom/msm8916-wingtech-wt88047.dts     | 12 ++---
>  10 files changed, 78 insertions(+), 75 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
> index ef5b39ba1238..3586f373d511 100644
> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
> @@ -175,18 +175,16 @@ &blsp_dma {
>  
>  &blsp_i2c2 {
>  	/* On Low speed expansion */
> -	status = "okay";
>  	label = "LS-I2C0";
> +	status = "okay";
>  };
>  
>  &blsp_i2c4 {
>  	/* On High speed expansion */
> -	status = "okay";
>  	label = "HS-I2C2";
> +	status = "okay";
>  
>  	adv_bridge: bridge@39 {
> -		status = "okay";
> -
>  		compatible = "adi,adv7533";
>  		reg = <0x39>;
>  
> @@ -208,6 +206,8 @@ adv_bridge: bridge@39 {
>  		pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
>  		#sound-dai-cells = <1>;
>  
> +		status = "okay";
> +
>  		ports {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> @@ -231,34 +231,35 @@ adv7533_out: endpoint {
>  
>  &blsp_i2c6 {
>  	/* On Low speed expansion */
> -	status = "okay";
>  	label = "LS-I2C1";
> +	status = "okay";
>  };
>  
>  &blsp_spi3 {
>  	/* On High speed expansion */
> -	status = "okay";
>  	label = "HS-SPI1";
> +	status = "okay";
>  };
>  
>  &blsp_spi5 {
>  	/* On Low speed expansion */
> -	status = "okay";
>  	label = "LS-SPI0";
> +	status = "okay";
>  };
>  
>  &blsp1_uart1 {
> -	status = "okay";
>  	label = "LS-UART0";
> +	status = "okay";
>  };
>  
>  &blsp1_uart2 {
> -	status = "okay";
>  	label = "LS-UART1";
> +	status = "okay";
>  };
>  
>  &camss {
>  	status = "okay";
> +
>  	ports {
>  		port@0 {
>  			reg = <0>;
> @@ -319,43 +320,41 @@ &mdss {
>  };
>  
>  &mpss {
> -	status = "okay";
> -
>  	firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn";
> +
> +	status = "okay";
>  };
>  
>  &pm8916_resin {
> -	status = "okay";
>  	linux,code = <KEY_VOLUMEDOWN>;
> +	status = "okay";
>  };
>  
>  &pronto {
> -	status = "okay";
> -
>  	firmware-name = "qcom/apq8016/wcnss.mbn";
> -};
>  
> -&sdhc_1 {
>  	status = "okay";
> +};
>  
> +&sdhc_1 {
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
>  	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> -};
>  
> -&sdhc_2 {
>  	status = "okay";
> +};
>  
> +&sdhc_2 {
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
>  	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
>  
>  	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
> -};
>  
> -&sound {
>  	status = "okay";
> +};
>  
> +&sound {
>  	pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
>  	pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
>  	pinctrl-names = "default", "sleep";
> @@ -364,6 +363,8 @@ &sound {
>  		"AMIC2", "MIC BIAS Internal2",
>  		"AMIC3", "MIC BIAS External1";
>  
> +	status = "okay";
> +
>  	quaternary-dai-link {
>  		link-name = "ADV7533";
>  		cpu {
> @@ -396,12 +397,13 @@ codec {
>  };
>  
>  &usb {
> -	status = "okay";
>  	extcon = <&usb_id>, <&usb_id>;
>  
>  	pinctrl-names = "default", "device";
>  	pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
>  	pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
> +
> +	status = "okay";
>  };
>  
>  &usb_hs_phy {
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
> index 701a5585d77e..20301eaa3b95 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
> @@ -152,8 +152,8 @@ led@1 {
>  };
>  
>  &pm8916_resin {
> -	status = "okay";
>  	linux,code = <KEY_VOLUMEDOWN>;
> +	status = "okay";
>  };
>  
>  &pm8916_vib {
> @@ -165,26 +165,26 @@ &pronto {
>  };
>  
>  &sdhc_1 {
> -	status = "okay";
> -
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
>  	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> -};
>  
> -&sdhc_2 {
>  	status = "okay";
> +};
>  
> +&sdhc_2 {
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
>  	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
>  
>  	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
> +
> +	status = "okay";
>  };
>  
>  &usb {
> -	status = "okay";
>  	extcon = <&usb_id>, <&usb_id>;
> +	status = "okay";
>  };
>  
>  &usb_hs_phy {
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
> index 3618704a5330..a0f868854d53 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
> @@ -133,26 +133,27 @@ &pronto {
>  };
>  
>  &sdhc_1 {
> -	status = "okay";
> -
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
>  	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> +
> +	status = "okay";
>  };
>  
>  &sdhc_2 {
> -	status = "okay";
>  	vmmc-supply = <&reg_sd_vmmc>;
>  
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
>  	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
>  	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
> +
> +	status = "okay";
>  };
>  
>  &usb {
> -	status = "okay";
>  	extcon = <&usb_id>, <&usb_id>;
> +	status = "okay";
>  };
>  
>  &usb_hs_phy {
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
> index 8c07eca900d3..2d266fd417f8 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
> @@ -219,8 +219,8 @@ &lpass {
>  };
>  
>  &pm8916_resin {
> -	status = "okay";
>  	linux,code = <KEY_VOLUMEDOWN>;
> +	status = "okay";
>  };
>  
>  &pm8916_vib {
> @@ -232,16 +232,14 @@ &pronto {
>  };
>  
>  &sdhc_1 {
> -	status = "okay";
> -
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
>  	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> -};
>  
> -&sdhc_2 {
>  	status = "okay";
> +};
>  
> +&sdhc_2 {
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdhc2_cd_default>;
>  	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdhc2_cd_default>;
> @@ -260,11 +258,11 @@ &sdhc_2 {
>  	 * SD card slot and forgot to re-route to gpio38.
>  	 */
>  	cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>;
> -};
>  
> -&sound {
>  	status = "okay";
> +};
>  
> +&sound {
>  	model = "msm8916";
>  	audio-routing =
>  		"AMIC1", "MIC BIAS External1",
> @@ -275,6 +273,8 @@ &sound {
>  	pinctrl-0 = <&cdc_pdm_lines_act>;
>  	pinctrl-1 = <&cdc_pdm_lines_sus>;
>  
> +	status = "okay";
> +
>  	primary-dai-link {
>  		link-name = "WCD";
>  		cpu {
> @@ -297,8 +297,8 @@ codec {
>  };
>  
>  &usb {
> -	status = "okay";
>  	extcon = <&usb_id>, <&usb_id>;
> +	status = "okay";
>  };
>  
>  &usb_hs_phy {
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
> index d1e8cf2f50c0..f63f0fb797b4 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
> @@ -219,8 +219,8 @@ &blsp1_uart2 {
>  };
>  
>  &pm8916_resin {
> -	status = "okay";
>  	linux,code = <KEY_VOLUMEDOWN>;
> +	status = "okay";
>  };
>  
>  &pm8916_usbin {
> @@ -236,27 +236,27 @@ &pronto {
>  };
>  
>  &sdhc_1 {
> -	status = "okay";
> -
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
>  	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> -};
>  
> -&sdhc_2 {
>  	status = "okay";
> +};
>  
> +&sdhc_2 {
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
>  	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
>  
>  	non-removable;
> +
> +	status = "okay";
>  };
>  
>  &usb {
> -	status = "okay";
>  	dr_mode = "peripheral";
>  	extcon = <&pm8916_usbin>;
> +	status = "okay";
>  };
>  
>  &usb_hs_phy {
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
> index 3899e11b9843..4d627d06f87b 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
> @@ -91,8 +91,8 @@ &blsp1_uart2 {
>  };
>  
>  &pm8916_resin {
> -	status = "okay";
>  	linux,code = <KEY_VOLUMEDOWN>;
> +	status = "okay";
>  };
>  
>  &pm8916_vib {
> @@ -104,26 +104,26 @@ &pronto {
>  };
>  
>  &sdhc_1 {
> -	status = "okay";
> -
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
>  	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> -};
>  
> -&sdhc_2 {
>  	status = "okay";
> +};
>  
> +&sdhc_2 {
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
>  	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
>  
>  	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
> +
> +	status = "okay";
>  };
>  
>  &usb {
> -	status = "okay";
>  	extcon = <&usb_id>, <&usb_id>;
> +	status = "okay";
>  };
>  
>  &usb_hs_phy {
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
> index d600916a0e55..13c586079e50 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
> @@ -248,8 +248,8 @@ &mdss {
>  };
>  
>  &pm8916_resin {
> -	status = "okay";
>  	linux,code = <KEY_VOLUMEDOWN>;
> +	status = "okay";
>  };
>  
>  &pronto {
> @@ -257,26 +257,26 @@ &pronto {
>  };
>  
>  &sdhc_1 {
> -	status = "okay";
> -
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
>  	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> -};
>  
> -&sdhc_2 {
>  	status = "okay";
> +};
>  
> +&sdhc_2 {
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
>  	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
>  
>  	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
> +
> +	status = "okay";
>  };
>  
>  &usb {
> -	status = "okay";
>  	extcon = <&muic>, <&muic>;
> +	status = "okay";
>  };
>  
>  &usb_hs_phy {
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
> index 7ac49a021563..8eb68bb6607c 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
> @@ -53,8 +53,8 @@ &blsp1_uart2 {
>  };
>  
>  &pm8916_resin {
> -	status = "okay";
>  	linux,code = <KEY_VOLUMEDOWN>;
> +	status = "okay";
>  };
>  
>  /* FIXME: Replace with SM5703 MUIC when driver is available */
> @@ -67,27 +67,27 @@ &pronto {
>  };
>  
>  &sdhc_1 {
> -	status = "okay";
> -
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
>  	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> -};
>  
> -&sdhc_2 {
>  	status = "okay";
> +};
>  
> +&sdhc_2 {
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
>  	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
>  
>  	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
> +
> +	status = "okay";
>  };
>  
>  &usb {
> -	status = "okay";
>  	dr_mode = "peripheral";
>  	extcon = <&pm8916_usbin>;
> +	status = "okay";
>  };
>  
>  &usb_hs_phy {
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
> index d4984b3af802..34bee5211413 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
> @@ -264,8 +264,8 @@ &blsp1_uart2 {
>  };
>  
>  &pm8916_resin {
> -	status = "okay";
>  	linux,code = <KEY_VOLUMEDOWN>;
> +	status = "okay";
>  };
>  
>  &pm8916_vib {
> @@ -281,16 +281,14 @@ iris {
>  };
>  
>  &sdhc_1 {
> -	status = "okay";
> -
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
>  	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> -};
>  
> -&sdhc_2 {
>  	status = "okay";
> +};
>  
> +&sdhc_2 {
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
>  	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
> @@ -309,11 +307,13 @@ &sdhc_2 {
>  	 * (without tuning), so maybe only tuning is broken?
>  	 */
>  	no-1-8-v;
> +
> +	status = "okay";
>  };
>  
>  &usb {
> -	status = "okay";
>  	extcon = <&muic>, <&muic>;
> +	status = "okay";
>  };
>  
>  &usb_hs_phy {
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
> index a87be1d95b14..24a5c3486beb 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
> @@ -145,8 +145,8 @@ &blsp1_uart2 {
>  };
>  
>  &pm8916_resin {
> -	status = "okay";
>  	linux,code = <KEY_VOLUMEDOWN>;
> +	status = "okay";
>  };
>  
>  &pm8916_vib {
> @@ -158,26 +158,26 @@ &pronto {
>  };
>  
>  &sdhc_1 {
> -	status = "okay";
> -
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
>  	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> -};
>  
> -&sdhc_2 {
>  	status = "okay";
> +};
>  
> +&sdhc_2 {
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
>  	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
>  
>  	non-removable;
> +
> +	status = "okay";
>  };
>  
>  &usb {
> -	status = "okay";
>  	extcon = <&usb_id>, <&usb_id>;
> +	status = "okay";
>  };
>  
>  &usb_hs_phy {