diff mbox series

[4/7] parport_pc: Add a mode mask field for PCI devices

Message ID 20230108215656.6433-4-sudipm.mukherjee@gmail.com
State New
Headers
Series [1/7] parport_pc: Remove stale `parport_pc_ecp_read_block_pio' reference |

Commit Message

Sudip Mukherjee Jan. 8, 2023, 9:56 p.m. UTC 
  From: "Maciej W. Rozycki" <macro@orcam.me.uk>

Add a mode mask field for PCI devices and use `__parport_pc_probe_port'
in place of `parport_pc_probe_port' to apply it.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
---
 drivers/parport/parport_pc.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index ad49fd356c7b..2928f36e05ff 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2659,6 +2659,9 @@  static struct parport_pc_pci {
 		/* -1 if not there, >6 for offset-method (max BAR is 6) */
 	} addr[4];
 
+	/* Bit field of parport modes to exclude. */
+	unsigned int mode_mask;
+
 	/* If set, this is called immediately after pci_enable_device.
 	 * If it returns non-zero, no probing will take place and the
 	 * ports will not be used. */
@@ -2862,9 +2865,10 @@  static int parport_pc_pci_probe(struct pci_dev *dev,
 			       id->vendor, id->device, io_lo, io_hi, irq);
 		}
 		data->ports[count] =
-			parport_pc_probe_port(io_lo, io_hi, irq,
-					       PARPORT_DMA_NONE, &dev->dev,
-					       IRQF_SHARED);
+			__parport_pc_probe_port(io_lo, io_hi, irq,
+						PARPORT_DMA_NONE, &dev->dev,
+						IRQF_SHARED,
+						cards[i].mode_mask, 0);
 		if (data->ports[count])
 			count++;
 	}