[v3,2/3] thermal/drivers/intel: Use generic trip points for intel_pch
Commit Message
From: Daniel Lezcano <daniel.lezcano@linaro.org>
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert the ops content logic into generic trip points and register
them with the thermal zone.
In order to consolidate the code, use the ACPI thermal framework API
to fill the generic trip point from the ACPI tables.
It has been tested on a Intel i7-8650U - x280 with the INT3400, the
PCH, ACPITZ, and x86_pkg_temp. No regression observed so far.
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
---
V3:
- The driver Kconfig option selects CONFIG_THERMAL_ACPI
---
drivers/thermal/intel/Kconfig | 1 +
drivers/thermal/intel/intel_pch_thermal.c | 88 +++++------------------
2 files changed, 20 insertions(+), 69 deletions(-)
Comments
On Wed, 2023-01-04 at 23:21 +0100, Daniel Lezcano wrote:
> From: Daniel Lezcano <daniel.lezcano@linaro.org>
>
> The thermal framework gives the possibility to register the trip
> points with the thermal zone. When that is done, no get_trip_* ops
> are
> needed and they can be removed.
>
> Convert the ops content logic into generic trip points and register
> them with the thermal zone.
>
> In order to consolidate the code, use the ACPI thermal framework API
> to fill the generic trip point from the ACPI tables.
>
> It has been tested on a Intel i7-8650U - x280 with the INT3400, the
> PCH, ACPITZ, and x86_pkg_temp. No regression observed so far.
>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
> ---
> V3:
> - The driver Kconfig option selects CONFIG_THERMAL_ACPI
> ---
> drivers/thermal/intel/Kconfig | 1 +
> drivers/thermal/intel/intel_pch_thermal.c | 88 +++++--------------
> ----
> 2 files changed, 20 insertions(+), 69 deletions(-)
>
> diff --git a/drivers/thermal/intel/Kconfig
> b/drivers/thermal/intel/Kconfig
> index f0c845679250..738b88b290f4 100644
> --- a/drivers/thermal/intel/Kconfig
> +++ b/drivers/thermal/intel/Kconfig
> @@ -75,6 +75,7 @@ config INTEL_BXT_PMIC_THERMAL
> config INTEL_PCH_THERMAL
> tristate "Intel PCH Thermal Reporting Driver"
> depends on X86 && PCI
> + select THERMAL_ACPI
THERMAL_ACPI depends on ACPI but the PCH thermal driver does not.
So we will run into "unmet dependencies" issue when CONFIG_ACPI is
cleared like below
WARNING: unmet direct dependencies detected for THERMAL_ACPI
Depends on [n]: THERMAL [=y] && ACPI [=n]
Selected by [m]:
- INTEL_PCH_THERMAL [=m] && THERMAL [=y] && (X86 [=y] ||
X86_INTEL_QUARK [=n] || COMPILE_TEST [=n]) && X86 [=y] && PCI [=y]
thanks,
rui
> help
> Enable this to support thermal reporting on certain intel
> PCHs.
> Thermal reporting device will provide temperature reading,
> diff --git a/drivers/thermal/intel/intel_pch_thermal.c
> b/drivers/thermal/intel/intel_pch_thermal.c
> index dabf11a687a1..530fe9b38381 100644
> --- a/drivers/thermal/intel/intel_pch_thermal.c
> +++ b/drivers/thermal/intel/intel_pch_thermal.c
> @@ -65,6 +65,8 @@
> #define WPT_TEMP_OFFSET (PCH_TEMP_OFFSET *
> MILLIDEGREE_PER_DEGREE)
> #define GET_PCH_TEMP(x) (((x) / 2) + PCH_TEMP_OFFSET)
>
> +#define PCH_MAX_TRIPS 3 /* critical, hot, passive */
> +
> /* Amount of time for each cooling delay, 100ms by default for now
> */
> static unsigned int delay_timeout = 100;
> module_param(delay_timeout, int, 0644);
> @@ -82,12 +84,7 @@ struct pch_thermal_device {
> const struct pch_dev_ops *ops;
> struct pci_dev *pdev;
> struct thermal_zone_device *tzd;
> - int crt_trip_id;
> - unsigned long crt_temp;
> - int hot_trip_id;
> - unsigned long hot_temp;
> - int psv_trip_id;
> - unsigned long psv_temp;
> + struct thermal_trip trips[PCH_MAX_TRIPS];
> bool bios_enabled;
> };
>
> @@ -102,33 +99,22 @@ static void pch_wpt_add_acpi_psv_trip(struct
> pch_thermal_device *ptd,
> int *nr_trips)
> {
> struct acpi_device *adev;
> -
> - ptd->psv_trip_id = -1;
> + int ret;
>
> adev = ACPI_COMPANION(&ptd->pdev->dev);
> - if (adev) {
> - unsigned long long r;
> - acpi_status status;
> -
> - status = acpi_evaluate_integer(adev->handle, "_PSV",
> NULL,
> - &r);
> - if (ACPI_SUCCESS(status)) {
> - unsigned long trip_temp;
> -
> - trip_temp = deci_kelvin_to_millicelsius(r);
> - if (trip_temp) {
> - ptd->psv_temp = trip_temp;
> - ptd->psv_trip_id = *nr_trips;
> - ++(*nr_trips);
> - }
> - }
> - }
> + if (!adev)
> + return;
> +
> + ret = thermal_acpi_trip_psv(adev, &ptd->trips[*nr_trips]);
> + if (ret)
> + return;
> +
> + ++(*nr_trips);
> }
> #else
> static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device
> *ptd,
> int *nr_trips)
> {
> - ptd->psv_trip_id = -1;
>
> }
> #endif
> @@ -163,21 +149,19 @@ static int pch_wpt_init(struct
> pch_thermal_device *ptd, int *nr_trips)
> }
>
> read_trips:
> - ptd->crt_trip_id = -1;
> trip_temp = readw(ptd->hw_base + WPT_CTT);
> trip_temp &= 0x1FF;
> if (trip_temp) {
> - ptd->crt_temp = GET_WPT_TEMP(trip_temp);
> - ptd->crt_trip_id = 0;
> + ptd->trips[*nr_trips].temperature =
> GET_WPT_TEMP(trip_temp);
> + ptd->trips[*nr_trips].type = THERMAL_TRIP_CRITICAL;
> ++(*nr_trips);
> }
>
> - ptd->hot_trip_id = -1;
> trip_temp = readw(ptd->hw_base + WPT_PHL);
> trip_temp &= 0x1FF;
> if (trip_temp) {
> - ptd->hot_temp = GET_WPT_TEMP(trip_temp);
> - ptd->hot_trip_id = *nr_trips;
> + ptd->trips[*nr_trips].temperature =
> GET_WPT_TEMP(trip_temp);
> + ptd->trips[*nr_trips].type = THERMAL_TRIP_HOT;
> ++(*nr_trips);
> }
>
> @@ -298,39 +282,6 @@ static int pch_thermal_get_temp(struct
> thermal_zone_device *tzd, int *temp)
> return ptd->ops->get_temp(ptd, temp);
> }
>
> -static int pch_get_trip_type(struct thermal_zone_device *tzd, int
> trip,
> - enum thermal_trip_type *type)
> -{
> - struct pch_thermal_device *ptd = tzd->devdata;
> -
> - if (ptd->crt_trip_id == trip)
> - *type = THERMAL_TRIP_CRITICAL;
> - else if (ptd->hot_trip_id == trip)
> - *type = THERMAL_TRIP_HOT;
> - else if (ptd->psv_trip_id == trip)
> - *type = THERMAL_TRIP_PASSIVE;
> - else
> - return -EINVAL;
> -
> - return 0;
> -}
> -
> -static int pch_get_trip_temp(struct thermal_zone_device *tzd, int
> trip, int *temp)
> -{
> - struct pch_thermal_device *ptd = tzd->devdata;
> -
> - if (ptd->crt_trip_id == trip)
> - *temp = ptd->crt_temp;
> - else if (ptd->hot_trip_id == trip)
> - *temp = ptd->hot_temp;
> - else if (ptd->psv_trip_id == trip)
> - *temp = ptd->psv_temp;
> - else
> - return -EINVAL;
> -
> - return 0;
> -}
> -
> static void pch_critical(struct thermal_zone_device *tzd)
> {
> dev_dbg(&tzd->device, "%s: critical temperature reached\n",
> tzd->type);
> @@ -338,8 +289,6 @@ static void pch_critical(struct
> thermal_zone_device *tzd)
>
> static struct thermal_zone_device_ops tzd_ops = {
> .get_temp = pch_thermal_get_temp,
> - .get_trip_type = pch_get_trip_type,
> - .get_trip_temp = pch_get_trip_temp,
> .critical = pch_critical,
> };
>
> @@ -423,8 +372,9 @@ static int intel_pch_thermal_probe(struct pci_dev
> *pdev,
> if (err)
> goto error_cleanup;
>
> - ptd->tzd = thermal_zone_device_register(bi->name, nr_trips, 0,
> ptd,
> - &tzd_ops, NULL, 0, 0);
> + ptd->tzd = thermal_zone_device_register_with_trips(bi->name,
> ptd->trips,
> + nr_trips, 0,
> ptd,
> + &tzd_ops,
> NULL, 0, 0);
> if (IS_ERR(ptd->tzd)) {
> dev_err(&pdev->dev, "Failed to register thermal zone
> %s\n",
> bi->name);
Hi Rui,
On 06/01/2023 09:32, Zhang, Rui wrote:
> On Wed, 2023-01-04 at 23:21 +0100, Daniel Lezcano wrote:
>> From: Daniel Lezcano <daniel.lezcano@linaro.org>
>>
>> The thermal framework gives the possibility to register the trip
>> points with the thermal zone. When that is done, no get_trip_* ops
>> are
>> needed and they can be removed.
>>
>> Convert the ops content logic into generic trip points and register
>> them with the thermal zone.
>>
>> In order to consolidate the code, use the ACPI thermal framework API
>> to fill the generic trip point from the ACPI tables.
>>
>> It has been tested on a Intel i7-8650U - x280 with the INT3400, the
>> PCH, ACPITZ, and x86_pkg_temp. No regression observed so far.
>>
>> Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
>> ---
>> V3:
>> - The driver Kconfig option selects CONFIG_THERMAL_ACPI
>> ---
>> drivers/thermal/intel/Kconfig | 1 +
>> drivers/thermal/intel/intel_pch_thermal.c | 88 +++++--------------
>> ----
>> 2 files changed, 20 insertions(+), 69 deletions(-)
>>
>> diff --git a/drivers/thermal/intel/Kconfig
>> b/drivers/thermal/intel/Kconfig
>> index f0c845679250..738b88b290f4 100644
>> --- a/drivers/thermal/intel/Kconfig
>> +++ b/drivers/thermal/intel/Kconfig
>> @@ -75,6 +75,7 @@ config INTEL_BXT_PMIC_THERMAL
>> config INTEL_PCH_THERMAL
>> tristate "Intel PCH Thermal Reporting Driver"
>> depends on X86 && PCI
>> + select THERMAL_ACPI
>
> THERMAL_ACPI depends on ACPI but the PCH thermal driver does not.
> So we will run into "unmet dependencies" issue when CONFIG_ACPI is
> cleared like below
>
> WARNING: unmet direct dependencies detected for THERMAL_ACPI
> Depends on [n]: THERMAL [=y] && ACPI [=n]
> Selected by [m]:
> - INTEL_PCH_THERMAL [=m] && THERMAL [=y] && (X86 [=y] ||
> X86_INTEL_QUARK [=n] || COMPILE_TEST [=n]) && X86 [=y] && PCI [=y]
>
Ah yes, indeed. Thanks for spotting this.
Given the code, I think we should do:
select THERMAL_ACPI if ACPI
it is from my POV semantically correct.
@@ -75,6 +75,7 @@ config INTEL_BXT_PMIC_THERMAL
config INTEL_PCH_THERMAL
tristate "Intel PCH Thermal Reporting Driver"
depends on X86 && PCI
+ select THERMAL_ACPI
help
Enable this to support thermal reporting on certain intel PCHs.
Thermal reporting device will provide temperature reading,
@@ -65,6 +65,8 @@
#define WPT_TEMP_OFFSET (PCH_TEMP_OFFSET * MILLIDEGREE_PER_DEGREE)
#define GET_PCH_TEMP(x) (((x) / 2) + PCH_TEMP_OFFSET)
+#define PCH_MAX_TRIPS 3 /* critical, hot, passive */
+
/* Amount of time for each cooling delay, 100ms by default for now */
static unsigned int delay_timeout = 100;
module_param(delay_timeout, int, 0644);
@@ -82,12 +84,7 @@ struct pch_thermal_device {
const struct pch_dev_ops *ops;
struct pci_dev *pdev;
struct thermal_zone_device *tzd;
- int crt_trip_id;
- unsigned long crt_temp;
- int hot_trip_id;
- unsigned long hot_temp;
- int psv_trip_id;
- unsigned long psv_temp;
+ struct thermal_trip trips[PCH_MAX_TRIPS];
bool bios_enabled;
};
@@ -102,33 +99,22 @@ static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd,
int *nr_trips)
{
struct acpi_device *adev;
-
- ptd->psv_trip_id = -1;
+ int ret;
adev = ACPI_COMPANION(&ptd->pdev->dev);
- if (adev) {
- unsigned long long r;
- acpi_status status;
-
- status = acpi_evaluate_integer(adev->handle, "_PSV", NULL,
- &r);
- if (ACPI_SUCCESS(status)) {
- unsigned long trip_temp;
-
- trip_temp = deci_kelvin_to_millicelsius(r);
- if (trip_temp) {
- ptd->psv_temp = trip_temp;
- ptd->psv_trip_id = *nr_trips;
- ++(*nr_trips);
- }
- }
- }
+ if (!adev)
+ return;
+
+ ret = thermal_acpi_trip_psv(adev, &ptd->trips[*nr_trips]);
+ if (ret)
+ return;
+
+ ++(*nr_trips);
}
#else
static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd,
int *nr_trips)
{
- ptd->psv_trip_id = -1;
}
#endif
@@ -163,21 +149,19 @@ static int pch_wpt_init(struct pch_thermal_device *ptd, int *nr_trips)
}
read_trips:
- ptd->crt_trip_id = -1;
trip_temp = readw(ptd->hw_base + WPT_CTT);
trip_temp &= 0x1FF;
if (trip_temp) {
- ptd->crt_temp = GET_WPT_TEMP(trip_temp);
- ptd->crt_trip_id = 0;
+ ptd->trips[*nr_trips].temperature = GET_WPT_TEMP(trip_temp);
+ ptd->trips[*nr_trips].type = THERMAL_TRIP_CRITICAL;
++(*nr_trips);
}
- ptd->hot_trip_id = -1;
trip_temp = readw(ptd->hw_base + WPT_PHL);
trip_temp &= 0x1FF;
if (trip_temp) {
- ptd->hot_temp = GET_WPT_TEMP(trip_temp);
- ptd->hot_trip_id = *nr_trips;
+ ptd->trips[*nr_trips].temperature = GET_WPT_TEMP(trip_temp);
+ ptd->trips[*nr_trips].type = THERMAL_TRIP_HOT;
++(*nr_trips);
}
@@ -298,39 +282,6 @@ static int pch_thermal_get_temp(struct thermal_zone_device *tzd, int *temp)
return ptd->ops->get_temp(ptd, temp);
}
-static int pch_get_trip_type(struct thermal_zone_device *tzd, int trip,
- enum thermal_trip_type *type)
-{
- struct pch_thermal_device *ptd = tzd->devdata;
-
- if (ptd->crt_trip_id == trip)
- *type = THERMAL_TRIP_CRITICAL;
- else if (ptd->hot_trip_id == trip)
- *type = THERMAL_TRIP_HOT;
- else if (ptd->psv_trip_id == trip)
- *type = THERMAL_TRIP_PASSIVE;
- else
- return -EINVAL;
-
- return 0;
-}
-
-static int pch_get_trip_temp(struct thermal_zone_device *tzd, int trip, int *temp)
-{
- struct pch_thermal_device *ptd = tzd->devdata;
-
- if (ptd->crt_trip_id == trip)
- *temp = ptd->crt_temp;
- else if (ptd->hot_trip_id == trip)
- *temp = ptd->hot_temp;
- else if (ptd->psv_trip_id == trip)
- *temp = ptd->psv_temp;
- else
- return -EINVAL;
-
- return 0;
-}
-
static void pch_critical(struct thermal_zone_device *tzd)
{
dev_dbg(&tzd->device, "%s: critical temperature reached\n", tzd->type);
@@ -338,8 +289,6 @@ static void pch_critical(struct thermal_zone_device *tzd)
static struct thermal_zone_device_ops tzd_ops = {
.get_temp = pch_thermal_get_temp,
- .get_trip_type = pch_get_trip_type,
- .get_trip_temp = pch_get_trip_temp,
.critical = pch_critical,
};
@@ -423,8 +372,9 @@ static int intel_pch_thermal_probe(struct pci_dev *pdev,
if (err)
goto error_cleanup;
- ptd->tzd = thermal_zone_device_register(bi->name, nr_trips, 0, ptd,
- &tzd_ops, NULL, 0, 0);
+ ptd->tzd = thermal_zone_device_register_with_trips(bi->name, ptd->trips,
+ nr_trips, 0, ptd,
+ &tzd_ops, NULL, 0, 0);
if (IS_ERR(ptd->tzd)) {
dev_err(&pdev->dev, "Failed to register thermal zone %s\n",
bi->name);