[v2,1/6] arm64: dts: qcom: sc8280xp: disable sound nodes
Commit Message
The sound nodes in the SoC dtsi should be disabled by default.
Note that the lpass-tlmm and macro blocks depend on having the board dts
enable the adsp and specifying an appropriate firmware to enable the
q6prm clock controller.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
.../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 20 +++++++++++++++++++
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 16 +++++++++++++++
2 files changed, 36 insertions(+)
@@ -628,6 +628,10 @@ &remoteproc_nsp0 {
status = "okay";
};
+&rxmacro {
+ status = "okay";
+};
+
&soc {
wcd938x: codec {
compatible = "qcom,wcd9380-codec";
@@ -731,6 +735,8 @@ codec {
};
&swr0 {
+ status = "okay";
+
left_spkr: wsa8830-left@0,1 {
compatible = "sdw10217020200";
reg = <0 1>;
@@ -776,11 +782,17 @@ wcd_tx: wcd9380-tx@0,3 {
};
};
+&txmacro {
+ status = "okay";
+};
+
&vamacro {
pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
pinctrl-names = "default";
vdd-micb-supply = <&vreg_s10b>;
qcom,dmic-sample-rate = <600000>;
+
+ status = "okay";
};
&usb_0 {
@@ -831,12 +843,20 @@ &usb_1_qmpphy {
status = "okay";
};
+&wsamacro {
+ status = "okay";
+};
+
&xo_board_clk {
clock-frequency = <38400000>;
};
/* PINCTRL */
+&lpass_tlmm {
+ status = "okay";
+};
+
&pmc8280_1_gpios {
edp_bl_en: edp-bl-en-state {
pins = "gpio8";
@@ -1733,6 +1733,8 @@ rxmacro: rxmacro@3200000 {
pinctrl-names = "default";
pinctrl-0 = <&rx_swr_default>;
+
+ status = "disabled";
};
/* RX */
@@ -1760,6 +1762,8 @@ swr1: soundwire-controller@3210000 {
#sound-dai-cells = <1>;
#address-cells = <2>;
#size-cells = <0>;
+
+ status = "disabled";
};
txmacro: txmacro@3220000 {
@@ -1783,6 +1787,8 @@ txmacro: txmacro@3220000 {
#address-cells = <2>;
#size-cells = <2>;
#sound-dai-cells = <1>;
+
+ status = "disabled";
};
wsamacro: codec@3240000 {
@@ -1804,6 +1810,8 @@ wsamacro: codec@3240000 {
pinctrl-names = "default";
pinctrl-0 = <&wsa_swr_default>;
+
+ status = "disabled";
};
/* WSA */
@@ -1830,6 +1838,8 @@ swr0: soundwire-controller@3250000 {
#sound-dai-cells = <1>;
#address-cells = <2>;
#size-cells = <0>;
+
+ status = "disabled";
};
/* TX */
@@ -1858,6 +1868,8 @@ swr2: soundwire-controller@3330000 {
qcom,ports-word-length = /bits/ 8 <0xff 0x00 0xff 0xff>;
qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>;
qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00 0x00>;
+
+ status = "disabled";
};
vamacro: codec@3370000 {
@@ -1874,6 +1886,8 @@ vamacro: codec@3370000 {
#clock-cells = <0>;
clock-output-names = "fsgen";
#sound-dai-cells = <1>;
+
+ status = "disabled";
};
lpass_tlmm: pinctrl@33c0000 {
@@ -1888,6 +1902,8 @@ lpass_tlmm: pinctrl@33c0000 {
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
clock-names = "core", "audio";
+ status = "disabled";
+
tx_swr_default: tx-swr-default-state {
clk-pins {
pins = "gpio0";