[v10,09/13] x86/resctrl: Add interface to read mbm_total_bytes_config
Commit Message
The event configuration can be viewed by the user by reading the
configuration file /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config.
The event configuration settings are domain specific and will affect all
the CPUs in the domain.
Following are the types of events supported:
==== ===========================================================
Bits Description
==== ===========================================================
6 Dirty Victims from the QOS domain to all types of memory
5 Reads to slow memory in the non-local NUMA domain
4 Reads to slow memory in the local NUMA domain
3 Non-temporal writes to non-local NUMA domain
2 Non-temporal writes to local NUMA domain
1 Reads to memory in the non-local NUMA domain
0 Reads to memory in the local NUMA domain
==== ===========================================================
By default, the mbm_total_bytes_config is set to 0x7f to count all the
event types.
For example:
$cat /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config
0=0x7f;1=0x7f;2=0x7f;3=0x7f
In this case, the event mbm_total_bytes is configured with 0x7f on
domains 0 to 3.
Signed-off-by: Babu Moger <babu.moger@amd.com>
---
arch/x86/include/asm/msr-index.h | 1 +
arch/x86/kernel/cpu/resctrl/internal.h | 24 ++++++
arch/x86/kernel/cpu/resctrl/monitor.c | 4 +-
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 102 +++++++++++++++++++++++++
4 files changed, 130 insertions(+), 1 deletion(-)
Comments
Hi Babu,
On 12/22/2022 3:31 PM, Babu Moger wrote:
> The event configuration can be viewed by the user by reading the
> configuration file /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config.
> The event configuration settings are domain specific and will affect all
> the CPUs in the domain.
>
> Following are the types of events supported:
> ==== ===========================================================
> Bits Description
> ==== ===========================================================
> 6 Dirty Victims from the QOS domain to all types of memory
> 5 Reads to slow memory in the non-local NUMA domain
> 4 Reads to slow memory in the local NUMA domain
> 3 Non-temporal writes to non-local NUMA domain
> 2 Non-temporal writes to local NUMA domain
> 1 Reads to memory in the non-local NUMA domain
> 0 Reads to memory in the local NUMA domain
> ==== ===========================================================
>
> By default, the mbm_total_bytes_config is set to 0x7f to count all the
> event types.
>
> For example:
> $cat /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config
> 0=0x7f;1=0x7f;2=0x7f;3=0x7f
>
> In this case, the event mbm_total_bytes is configured with 0x7f on
> domains 0 to 3.
>
> Signed-off-by: Babu Moger <babu.moger@amd.com>
...
> --- a/arch/x86/kernel/cpu/resctrl/internal.h
> +++ b/arch/x86/kernel/cpu/resctrl/internal.h
> @@ -30,6 +30,29 @@
> */
> #define MBM_CNTR_WIDTH_OFFSET_MAX (62 - MBM_CNTR_WIDTH_BASE)
>
> +/* Reads to Local DRAM Memory */
> +#define READS_TO_LOCAL_MEM BIT(0)
> +
> +/* Reads to Remote DRAM Memory */
> +#define READS_TO_REMOTE_MEM BIT(1)
> +
> +/* Non-Temporal Writes to Local Memory */
> +#define NON_TEMP_WRITE_TO_LOCAL_MEM BIT(2)
> +
> +/* Non-Temporal Writes to Remote Memory */
> +#define NON_TEMP_WRITE_TO_REMOTE_MEM BIT(3)
> +
> +/* Reads to Local Memory the system identifies as "Slow Memory" */
> +#define READS_TO_LOCAL_S_MEM BIT(4)
> +
> +/* Reads to Remote Memory the system identifies as "Slow Memory" */
> +#define READS_TO_REMOTE_S_MEM BIT(5)
> +
> +/* Dirty Victims to All Types of Memory */
> +#define DIRTY_VICTIMS_TO_ALL_MEM BIT(6)
Some stray white space above.
> +
> +/* Max event bits supported */
> +#define MAX_EVT_CONFIG_BITS GENMASK(6, 0)
>
> struct rdt_fs_context {
> struct kernfs_fs_context kfc;
Please remove stray white space. With that:
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reinette
Hi Reinette,
On 1/4/23 18:29, Reinette Chatre wrote:
> Hi Babu,
>
> On 12/22/2022 3:31 PM, Babu Moger wrote:
>> The event configuration can be viewed by the user by reading the
>> configuration file /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config.
>> The event configuration settings are domain specific and will affect all
>> the CPUs in the domain.
>>
>> Following are the types of events supported:
>> ==== ===========================================================
>> Bits Description
>> ==== ===========================================================
>> 6 Dirty Victims from the QOS domain to all types of memory
>> 5 Reads to slow memory in the non-local NUMA domain
>> 4 Reads to slow memory in the local NUMA domain
>> 3 Non-temporal writes to non-local NUMA domain
>> 2 Non-temporal writes to local NUMA domain
>> 1 Reads to memory in the non-local NUMA domain
>> 0 Reads to memory in the local NUMA domain
>> ==== ===========================================================
>>
>> By default, the mbm_total_bytes_config is set to 0x7f to count all the
>> event types.
>>
>> For example:
>> $cat /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config
>> 0=0x7f;1=0x7f;2=0x7f;3=0x7f
>>
>> In this case, the event mbm_total_bytes is configured with 0x7f on
>> domains 0 to 3.
>>
>> Signed-off-by: Babu Moger <babu.moger@amd.com>
> ...
>
>> --- a/arch/x86/kernel/cpu/resctrl/internal.h
>> +++ b/arch/x86/kernel/cpu/resctrl/internal.h
>> @@ -30,6 +30,29 @@
>> */
>> #define MBM_CNTR_WIDTH_OFFSET_MAX (62 - MBM_CNTR_WIDTH_BASE)
>>
>> +/* Reads to Local DRAM Memory */
>> +#define READS_TO_LOCAL_MEM BIT(0)
>> +
>> +/* Reads to Remote DRAM Memory */
>> +#define READS_TO_REMOTE_MEM BIT(1)
>> +
>> +/* Non-Temporal Writes to Local Memory */
>> +#define NON_TEMP_WRITE_TO_LOCAL_MEM BIT(2)
>> +
>> +/* Non-Temporal Writes to Remote Memory */
>> +#define NON_TEMP_WRITE_TO_REMOTE_MEM BIT(3)
>> +
>> +/* Reads to Local Memory the system identifies as "Slow Memory" */
>> +#define READS_TO_LOCAL_S_MEM BIT(4)
>> +
>> +/* Reads to Remote Memory the system identifies as "Slow Memory" */
>> +#define READS_TO_REMOTE_S_MEM BIT(5)
>> +
>> +/* Dirty Victims to All Types of Memory */
>> +#define DIRTY_VICTIMS_TO_ALL_MEM BIT(6)
> Some stray white space above.
Sure.
>
>> +
>> +/* Max event bits supported */
>> +#define MAX_EVT_CONFIG_BITS GENMASK(6, 0)
>>
>> struct rdt_fs_context {
>> struct kernfs_fs_context kfc;
> Please remove stray white space. With that:
>
> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Thanks
Babu
>
> Reinette
>
>
@@ -1062,6 +1062,7 @@
/* - AMD: */
#define MSR_IA32_MBA_BW_BASE 0xc0000200
#define MSR_IA32_SMBA_BW_BASE 0xc0000280
+#define MSR_IA32_EVT_CFG_BASE 0xc0000400
/* MSR_IA32_VMX_MISC bits */
#define MSR_IA32_VMX_MISC_INTEL_PT (1ULL << 14)
@@ -30,6 +30,29 @@
*/
#define MBM_CNTR_WIDTH_OFFSET_MAX (62 - MBM_CNTR_WIDTH_BASE)
+/* Reads to Local DRAM Memory */
+#define READS_TO_LOCAL_MEM BIT(0)
+
+/* Reads to Remote DRAM Memory */
+#define READS_TO_REMOTE_MEM BIT(1)
+
+/* Non-Temporal Writes to Local Memory */
+#define NON_TEMP_WRITE_TO_LOCAL_MEM BIT(2)
+
+/* Non-Temporal Writes to Remote Memory */
+#define NON_TEMP_WRITE_TO_REMOTE_MEM BIT(3)
+
+/* Reads to Local Memory the system identifies as "Slow Memory" */
+#define READS_TO_LOCAL_S_MEM BIT(4)
+
+/* Reads to Remote Memory the system identifies as "Slow Memory" */
+#define READS_TO_REMOTE_S_MEM BIT(5)
+
+/* Dirty Victims to All Types of Memory */
+#define DIRTY_VICTIMS_TO_ALL_MEM BIT(6)
+
+/* Max event bits supported */
+#define MAX_EVT_CONFIG_BITS GENMASK(6, 0)
struct rdt_fs_context {
struct kernfs_fs_context kfc;
@@ -531,5 +554,6 @@ bool has_busy_rmid(struct rdt_resource *r, struct rdt_domain *d);
void __check_limbo(struct rdt_domain *d, bool force_free);
void rdt_domain_reconfigure_cdp(struct rdt_resource *r);
void __init thread_throttle_mode_init(void);
+void __init mbm_config_rftype_init(const char *config);
#endif /* _ASM_X86_RESCTRL_INTERNAL_H */
@@ -784,8 +784,10 @@ int __init rdt_get_mon_l3_config(struct rdt_resource *r)
return ret;
if (rdt_cpu_has(X86_FEATURE_BMEC)) {
- if (rdt_cpu_has(X86_FEATURE_CQM_MBM_TOTAL))
+ if (rdt_cpu_has(X86_FEATURE_CQM_MBM_TOTAL)) {
mbm_total_event.configurable = true;
+ mbm_config_rftype_init("mbm_total_bytes_config");
+ }
if (rdt_cpu_has(X86_FEATURE_CQM_MBM_LOCAL))
mbm_local_event.configurable = true;
}
@@ -1418,6 +1418,93 @@ static int rdtgroup_size_show(struct kernfs_open_file *of,
return ret;
}
+struct mon_config_info {
+ u32 evtid;
+ u32 mon_config;
+};
+
+#define INVALID_CONFIG_INDEX UINT_MAX
+
+/**
+ * mon_event_config_index_get - get the hardware index for the
+ * configurable event
+ * @evtid: event id.
+ *
+ * Return: 0 for evtid == QOS_L3_MBM_TOTAL_EVENT_ID
+ * 1 for evtid == QOS_L3_MBM_LOCAL_EVENT_ID
+ * INVALID_CONFIG_INDEX for invalid evtid
+ */
+static inline unsigned int mon_event_config_index_get(u32 evtid)
+{
+ switch (evtid) {
+ case QOS_L3_MBM_TOTAL_EVENT_ID:
+ return 0;
+ case QOS_L3_MBM_LOCAL_EVENT_ID:
+ return 1;
+ default:
+ /* Should never reach here */
+ return INVALID_CONFIG_INDEX;
+ }
+}
+
+static void mon_event_config_read(void *info)
+{
+ struct mon_config_info *mon_info = info;
+ unsigned int index;
+ u32 h;
+
+ index = mon_event_config_index_get(mon_info->evtid);
+ if (index == INVALID_CONFIG_INDEX) {
+ pr_warn_once("Invalid event id %d\n", mon_info->evtid);
+ return;
+ }
+ rdmsr(MSR_IA32_EVT_CFG_BASE + index, mon_info->mon_config, h);
+
+ /* Report only the valid event configuration bits */
+ mon_info->mon_config &= MAX_EVT_CONFIG_BITS;
+}
+
+static void mondata_config_read(struct rdt_domain *d, struct mon_config_info *mon_info)
+{
+ smp_call_function_any(&d->cpu_mask, mon_event_config_read, mon_info, 1);
+}
+
+static int mbm_config_show(struct seq_file *s, struct rdt_resource *r, u32 evtid)
+{
+ struct mon_config_info mon_info = {0};
+ struct rdt_domain *dom;
+ bool sep = false;
+
+ mutex_lock(&rdtgroup_mutex);
+
+ list_for_each_entry(dom, &r->domains, list) {
+ if (sep)
+ seq_puts(s, ";");
+
+ memset(&mon_info, 0, sizeof(struct mon_config_info));
+ mon_info.evtid = evtid;
+ mondata_config_read(dom, &mon_info);
+
+ seq_printf(s, "%d=0x%02x", dom->id, mon_info.mon_config);
+ sep = true;
+ }
+ seq_puts(s, "\n");
+
+ mutex_unlock(&rdtgroup_mutex);
+
+ return 0;
+}
+
+static int mbm_total_bytes_config_show(struct kernfs_open_file *of,
+ struct seq_file *seq, void *v)
+{
+ struct rdt_resource *r = of->kn->parent->priv;
+
+ mbm_config_show(seq, r, QOS_L3_MBM_TOTAL_EVENT_ID);
+
+ return 0;
+}
+
/* rdtgroup information files for one cache resource. */
static struct rftype res_common_files[] = {
{
@@ -1516,6 +1603,12 @@ static struct rftype res_common_files[] = {
.seq_show = max_threshold_occ_show,
.fflags = RF_MON_INFO | RFTYPE_RES_CACHE,
},
+ {
+ .name = "mbm_total_bytes_config",
+ .mode = 0444,
+ .kf_ops = &rdtgroup_kf_single_ops,
+ .seq_show = mbm_total_bytes_config_show,
+ },
{
.name = "cpus",
.mode = 0644,
@@ -1622,6 +1715,15 @@ void __init thread_throttle_mode_init(void)
rft->fflags = RF_CTRL_INFO | RFTYPE_RES_MB;
}
+void __init mbm_config_rftype_init(const char *config)
+{
+ struct rftype *rft;
+
+ rft = rdtgroup_get_rftype_by_name(config);
+ if (rft)
+ rft->fflags = RF_MON_INFO | RFTYPE_RES_CACHE;
+}
+
/**
* rdtgroup_kn_mode_restrict - Restrict user access to named resctrl file
* @r: The resource group with which the file is associated.