diff mbox series

[v5,10/23] phy: qcom-qmp-ufs: Add HS G4 mode support to SM8350 SoC

Message ID 20221222141001.54849-11-manivannan.sadhasivam@linaro.org
State New
Headers
Series ufs: qcom: Add HS-G4 support |

Commit Message

Manivannan Sadhasivam Dec. 22, 2022, 2:09 p.m. UTC 
  UFS PHY in SM8350 SoC is capable of operating at HS G4 mode. Hence, add the
required register settings using the tables_hs_g4 struct instance.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 36 +++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 6c7c6a06fe3b..75e55c4181c9 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -571,6 +571,34 @@  static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs[] = {
 	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
 };
 
+static const struct qmp_phy_init_tbl sm8350_ufsphy_g4_tx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xe5),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_g4_rx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CTRL2, 0x81),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_TERM_BW, 0x6f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_MEASURE_TIME, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xbf),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0xbf),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0x2d),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x6d),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x6d),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xed),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0x3c),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_g4_pcs[] = {
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_BIST_FIXED_PAT_CTRL, 0x0a),
+};
+
 struct qmp_ufs_offsets {
 	u16 serdes;
 	u16 pcs;
@@ -875,6 +903,14 @@  static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
 		.serdes		= sm8350_ufsphy_hs_b_serdes,
 		.serdes_num	= ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
 	},
+	.tbls_hs_g4 = {
+		.tx		= sm8350_ufsphy_g4_tx,
+		.tx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_tx),
+		.rx		= sm8350_ufsphy_g4_rx,
+		.rx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_rx),
+		.pcs		= sm8350_ufsphy_g4_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8350_ufsphy_g4_pcs),
+	},
 	.clk_list		= sdm845_ufs_phy_clk_l,
 	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
 	.vreg_list		= qmp_phy_vreg_l,