[13/18] can: m_can: Cache tx putidx
Commit Message
m_can_tx_handler is the only place where data is written to the tx fifo.
We can calculate the putidx in the driver code here to avoid the
dependency on the txfqs register.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
drivers/net/can/m_can/m_can.c | 8 +++++++-
drivers/net/can/m_can/m_can.h | 3 +++
2 files changed, 10 insertions(+), 1 deletion(-)
@@ -1452,6 +1452,10 @@ static void m_can_start(struct net_device *dev)
cdev->can.state = CAN_STATE_ERROR_ACTIVE;
m_can_enable_all_interrupts(cdev);
+
+ if (cdev->version > 30)
+ cdev->tx_fifo_putidx = FIELD_GET(TXFQS_TFQPI_MASK,
+ m_can_read(cdev, M_CAN_TXFQS));
}
static int m_can_set_mode(struct net_device *dev, enum can_mode mode)
@@ -1740,7 +1744,7 @@ static netdev_tx_t m_can_tx_handler(struct m_can_classdev *cdev)
}
/* get put index for frame */
- putidx = FIELD_GET(TXFQS_TFQPI_MASK, txfqs);
+ putidx = cdev->tx_fifo_putidx;
/* Construct DLC Field, with CAN-FD configuration.
* Use the put index of the fifo as the message marker,
@@ -1773,6 +1777,8 @@ static netdev_tx_t m_can_tx_handler(struct m_can_classdev *cdev)
/* Enable TX FIFO element to start transfer */
m_can_write(cdev, M_CAN_TXBAR, (1 << putidx));
+ cdev->tx_fifo_putidx = (++cdev->tx_fifo_putidx >= cdev->can.echo_skb_max ?
+ 0 : cdev->tx_fifo_putidx);
/* stop network queue if fifo full */
if (m_can_tx_fifo_full(cdev) ||
@@ -102,6 +102,9 @@ struct m_can_classdev {
u32 tx_max_coalesced_frames_irq;
u32 tx_coalesce_usecs_irq;
+ // Store this internally to avoid fetch delays on peripheral chips
+ int tx_fifo_putidx;
+
struct mram_cfg mcfg[MRAM_CFG_NUM];
};