[v3,3/5] dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl

Message ID 20221220005529.34744-4-hal.feng@starfivetech.com
State New
Headers
Series Basic pinctrl support for StarFive JH7110 RISC-V SoC |

Commit Message

Hal Feng Dec. 20, 2022, 12:55 a.m. UTC
  From: Jianlong Huang <jianlong.huang@starfivetech.com>

Add pinctrl bindings for StarFive JH7110 SoC aon pinctrl controller.

Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
 .../pinctrl/starfive,jh7110-aon-pinctrl.yaml  | 126 ++++++++++++++++++
 .../pinctrl/starfive,jh7110-pinctrl.h         |  22 +++
 2 files changed, 148 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml
  

Comments

Rob Herring Dec. 20, 2022, 8:20 p.m. UTC | #1
On Tue, Dec 20, 2022 at 08:55:27AM +0800, Hal Feng wrote:
> From: Jianlong Huang <jianlong.huang@starfivetech.com>
> 
> Add pinctrl bindings for StarFive JH7110 SoC aon pinctrl controller.
> 
> Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
> Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
> ---
>  .../pinctrl/starfive,jh7110-aon-pinctrl.yaml  | 126 ++++++++++++++++++
>  .../pinctrl/starfive,jh7110-pinctrl.h         |  22 +++
>  2 files changed, 148 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml

Same comments in this one.
  
Hal Feng Feb. 3, 2023, 6:48 a.m. UTC | #2
On Tue, 20 Dec 2022 14:20:03 -0600, Rob Herring wrote:
> On Tue, Dec 20, 2022 at 08:55:27AM +0800, Hal Feng wrote:
>> From: Jianlong Huang <jianlong.huang@starfivetech.com>
>> 
>> Add pinctrl bindings for StarFive JH7110 SoC aon pinctrl controller.
>> 
>> Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
>> Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
>> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
>> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
>> ---
>>  .../pinctrl/starfive,jh7110-aon-pinctrl.yaml  | 126 ++++++++++++++++++
>>  .../pinctrl/starfive,jh7110-pinctrl.h         |  22 +++
>>  2 files changed, 148 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml
> 
> Same comments in this one.

Will fix in the next version. Thanks again for reviewing.

Best regards,
Hal
  

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml
new file mode 100644
index 000000000000..ff8098c31ecc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml
@@ -0,0 +1,126 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/starfive,jh7110-aon-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 Aon Pin Controller
+
+description: |
+  Bindings for the JH7110 RISC-V SoC from StarFive Technology Ltd.
+
+  Out of the SoC's many pins only the ones named PAD_GPIO0 to PAD_GPIO4
+  can be multiplexed and have configurable bias, drive strength,
+  schmitt trigger etc.
+  Some peripherals have their I/O go through the 4 "GPIOs". This also
+  includes PWM.
+
+maintainers:
+  - Jianlong Huang <jianlong.huang@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-aon-pinctrl
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    patternProperties:
+      '-pins$':
+        type: object
+        description: |
+          A pinctrl node should contain at least one subnode representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to
+          muxer configuration, system signal configuration, pin groups for
+          vin/vout module, pin voltage, mux functions for output, mux functions
+          for output enable, mux functions for input.
+
+        properties:
+          pinmux:
+            description: |
+              The list of GPIOs and their mux settings that properties in the
+              node apply to. This should be set using the GPIOMUX macro.
+            $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pinmux
+
+          bias-disable: true
+
+          bias-pull-up:
+            type: boolean
+
+          bias-pull-down:
+            type: boolean
+
+          drive-strength:
+            enum: [ 2, 4, 8, 12 ]
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          slew-rate:
+            maximum: 1
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@17020000 {
+        compatible = "starfive,jh7110-aon-pinctrl";
+        reg = <0x17020000 0x10000>;
+        resets = <&aoncrg 2>;
+        interrupts = <85>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        pwm-0 {
+            pwm-pins {
+                pinmux = <0xff030802>;
+                bias-disable;
+                drive-strength = <12>;
+                input-disable;
+                input-schmitt-disable;
+                slew-rate = <0>;
+            };
+        };
+    };
+
+...
diff --git a/include/dt-bindings/pinctrl/starfive,jh7110-pinctrl.h b/include/dt-bindings/pinctrl/starfive,jh7110-pinctrl.h
index c97dde8e864c..bff3dafd5671 100644
--- a/include/dt-bindings/pinctrl/starfive,jh7110-pinctrl.h
+++ b/include/dt-bindings/pinctrl/starfive,jh7110-pinctrl.h
@@ -104,6 +104,28 @@ 
 #define	PAD_QSPI_DATA2		93
 #define	PAD_QSPI_DATA3		94
 
+/* aon_iomux pin */
+#define	PAD_TESTEN		0
+#define	PAD_RGPIO0		1
+#define	PAD_RGPIO1		2
+#define	PAD_RGPIO2		3
+#define	PAD_RGPIO3		4
+#define	PAD_RSTN		5
+#define	PAD_GMAC0_MDC		6
+#define	PAD_GMAC0_MDIO		7
+#define	PAD_GMAC0_RXD0		8
+#define	PAD_GMAC0_RXD1		9
+#define	PAD_GMAC0_RXD2		10
+#define	PAD_GMAC0_RXD3		11
+#define	PAD_GMAC0_RXDV		12
+#define	PAD_GMAC0_RXC		13
+#define	PAD_GMAC0_TXD0		14
+#define	PAD_GMAC0_TXD1		15
+#define	PAD_GMAC0_TXD2		16
+#define	PAD_GMAC0_TXD3		17
+#define	PAD_GMAC0_TXEN		18
+#define	PAD_GMAC0_TXC		19
+
 #define GPOUT_LOW		0
 #define GPOUT_HIGH		1