[v4,4/4] arm64: dts: qcom: pm8941-rtc add alarm register
Commit Message
A few descriptions including a qcom,pm8941-rtc describe two reg-names
for the "rtc" and "alarm" register banks, but only one offset.
For consistency with reg-names, add the "alarm" register offset.
No functional change is expected from this.
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
arch/arm64/boot/dts/qcom/pm8150.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pm8916.dtsi | 3 ++-
arch/arm64/boot/dts/qcom/pm8950.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pmp8074.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pms405.dtsi | 2 +-
6 files changed, 7 insertions(+), 6 deletions(-)
@@ -121,7 +121,7 @@ pm8150_adc_tm: adc-tm@3500 {
rtc@6000 {
compatible = "qcom,pm8941-rtc";
- reg = <0x6000>;
+ reg = <0x6000>, <0x6100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
};
@@ -93,7 +93,8 @@ adc-chan@f {
rtc@6000 {
compatible = "qcom,pm8941-rtc";
- reg = <0x6000>;
+ reg = <0x6000>, <0x6100>;
+ reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
@@ -126,7 +126,7 @@ xo-therm-buf@3c {
rtc@6000 {
compatible = "qcom,pm8941-rtc";
- reg = <0x6000>;
+ reg = <0x6000>, <0x6100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
};
@@ -108,7 +108,7 @@ pmm8155au_1_adc_tm: adc-tm@3500 {
pmm8155au_1_rtc: rtc@6000 {
compatible = "qcom,pm8941-rtc";
- reg = <0x6000>;
+ reg = <0x6000>, <0x6100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
@@ -74,7 +74,7 @@ vph-pwr@131 {
pmp8074_rtc: rtc@6000 {
compatible = "qcom,pm8941-rtc";
- reg = <0x6000>;
+ reg = <0x6000>, <0x6100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
allow-set-time;
@@ -125,7 +125,7 @@ xo_therm: xo_temp@76 {
rtc@6000 {
compatible = "qcom,pm8941-rtc";
- reg = <0x6000>;
+ reg = <0x6000>, <0x6100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
};