drm/msm/a6xx: Avoid gx gbit halt during rpm suspend
Commit Message
As per the downstream driver, gx gbif halt is required only during
recovery sequence. So lets avoid it during regular rpm suspend.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
---
drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 15 +++++++++------
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 7 +++++++
drivers/gpu/drm/msm/adreno/a6xx_gpu.h | 1 +
3 files changed, 17 insertions(+), 6 deletions(-)
@@ -876,7 +876,8 @@ static void a6xx_gmu_rpmh_off(struct a6xx_gmu *gmu)
#define GBIF_CLIENT_HALT_MASK BIT(0)
#define GBIF_ARB_HALT_MASK BIT(1)
-static void a6xx_bus_clear_pending_transactions(struct adreno_gpu *adreno_gpu)
+static void a6xx_bus_clear_pending_transactions(struct adreno_gpu *adreno_gpu,
+ bool gx_off)
{
struct msm_gpu *gpu = &adreno_gpu->base;
@@ -889,9 +890,11 @@ static void a6xx_bus_clear_pending_transactions(struct adreno_gpu *adreno_gpu)
return;
}
- /* Halt the gx side of GBIF */
- gpu_write(gpu, REG_A6XX_RBBM_GBIF_HALT, 1);
- spin_until(gpu_read(gpu, REG_A6XX_RBBM_GBIF_HALT_ACK) & 1);
+ if (gx_off) {
+ /* Halt the gx side of GBIF */
+ gpu_write(gpu, REG_A6XX_RBBM_GBIF_HALT, 1);
+ spin_until(gpu_read(gpu, REG_A6XX_RBBM_GBIF_HALT_ACK) & 1);
+ }
/* Halt new client requests on GBIF */
gpu_write(gpu, REG_A6XX_GBIF_HALT, GBIF_CLIENT_HALT_MASK);
@@ -929,7 +932,7 @@ static void a6xx_gmu_force_off(struct a6xx_gmu *gmu)
/* Halt the gmu cm3 core */
gmu_write(gmu, REG_A6XX_GMU_CM3_SYSRESET, 1);
- a6xx_bus_clear_pending_transactions(adreno_gpu);
+ a6xx_bus_clear_pending_transactions(adreno_gpu, true);
/* Reset GPU core blocks */
gpu_write(gpu, REG_A6XX_RBBM_SW_RESET_CMD, 1);
@@ -1083,7 +1086,7 @@ static void a6xx_gmu_shutdown(struct a6xx_gmu *gmu)
return;
}
- a6xx_bus_clear_pending_transactions(adreno_gpu);
+ a6xx_bus_clear_pending_transactions(adreno_gpu, a6xx_gpu->hung);
/* tell the GMU we want to slumber */
ret = a6xx_gmu_notify_slumber(gmu);
@@ -1270,6 +1270,12 @@ static void a6xx_recover(struct msm_gpu *gpu)
if (hang_debug)
a6xx_dump(gpu);
+ /*
+ * To handle recovery specific sequences during the rpm suspend we are
+ * about to trigger
+ */
+ a6xx_gpu->hung = true;
+
/* Halt SQE first */
gpu_write(gpu, REG_A6XX_CP_SQE_CNTL, 3);
@@ -1312,6 +1318,7 @@ static void a6xx_recover(struct msm_gpu *gpu)
mutex_unlock(&gpu->active_lock);
msm_gpu_hw_init(gpu);
+ a6xx_gpu->hung = false;
}
static const char *a6xx_uche_fault_block(struct msm_gpu *gpu, u32 mid)
@@ -32,6 +32,7 @@ struct a6xx_gpu {
void *llc_slice;
void *htw_llc_slice;
bool have_mmu500;
+ bool hung;
};
#define to_a6xx_gpu(x) container_of(x, struct a6xx_gpu, base)