diff mbox series

arm64: dts: marvell: AC5/AC5X: Fix address for UART1

Message ID 20221215025402.1733132-1-chris.packham@alliedtelesis.co.nz
State New
Headers
Series arm64: dts: marvell: AC5/AC5X: Fix address for UART1 |

Commit Message

Chris Packham Dec. 15, 2022, 2:54 a.m. UTC 
  The correct address offset is 0x12100.

Fixes: 31be791e26cf ("arm64: dts: marvell: Add UART1-3 for AC5/AC5X")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
Not sure how this happened. I only noticed when I had a conflict in some
local patches I was rebasing against upstream. So I obviously had it
right at one point but then managed to break it in the process of
cleaning things up for submission.

 arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Chris Packham Jan. 10, 2023, 3:34 a.m. UTC | #1 
Hi All,

On 15/12/22 15:54, Chris Packham wrote:
> The correct address offset is 0x12100.
>
> Fixes: 31be791e26cf ("arm64: dts: marvell: Add UART1-3 for AC5/AC5X")
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> Not sure how this happened. I only noticed when I had a conflict in some
> local patches I was rebasing against upstream. So I obviously had it
> right at one point but then managed to break it in the process of
> cleaning things up for submission.

I know people have probably been away with various holidays but I think 
it's been long enough so....

ping?

>
>   arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
> index 7308f7b6b22c..8bce64069138 100644
> --- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
> +++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
> @@ -98,7 +98,7 @@ uart0: serial@12000 {
>   
>   			uart1: serial@12100 {
>   				compatible = "snps,dw-apb-uart";
> -				reg = <0x11000 0x100>;
> +				reg = <0x12100 0x100>;
>   				reg-shift = <2>;
>   				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
>   				reg-io-width = <1>;
Gregory CLEMENT Jan. 10, 2023, 9:29 a.m. UTC | #2 
Chris Packham <Chris.Packham@alliedtelesis.co.nz> writes:

> Hi All,
>
> On 15/12/22 15:54, Chris Packham wrote:
>> The correct address offset is 0x12100.
>>
>> Fixes: 31be791e26cf ("arm64: dts: marvell: Add UART1-3 for AC5/AC5X")
>> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
>> ---
>> Not sure how this happened. I only noticed when I had a conflict in some
>> local patches I was rebasing against upstream. So I obviously had it
>> right at one point but then managed to break it in the process of
>> cleaning things up for submission.
>
> I know people have probably been away with various holidays but I think 
> it's been long enough so....
>
> ping?


Applied on mvebu/fixes

Thanks,

Gregory

>
>>
>>   arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
>> index 7308f7b6b22c..8bce64069138 100644
>> --- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
>> +++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
>> @@ -98,7 +98,7 @@ uart0: serial@12000 {
>>   
>>   			uart1: serial@12100 {
>>   				compatible = "snps,dw-apb-uart";
>> -				reg = <0x11000 0x100>;
>> +				reg = <0x12100 0x100>;
>>   				reg-shift = <2>;
>>   				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
>>   				reg-io-width = <1>;
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
index 7308f7b6b22c..8bce64069138 100644
--- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -98,7 +98,7 @@  uart0: serial@12000 {
 
 			uart1: serial@12100 {
 				compatible = "snps,dw-apb-uart";
-				reg = <0x11000 0x100>;
+				reg = <0x12100 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				reg-io-width = <1>;